New brothread Cut Away Embroidery Stabiliser 10x12 — 100 Precut Sheets, Medium-Weight Permanent Polyester

New brothread Cut Away Embroidery Stabiliser is a medium-weight, permanent polyester backing sold as 100 precut 10"×12" sheets designed to stabilise knits, fleece, denim and other stretchy or unstable fabrics during machine embroidery.

Whether you’re finishing custom tees, embellishing hoodies or adding applique to denim, a dependable stabiliser keeps stitches crisp and prevents fabric distortion. New brothread’s cut away stabiliser is made from 100% polyester, is acid- and lead-free, and comes precut to 10"×12" to save hooping time. The stabiliser is permanent — intended to remain attached to the garment — and works best for light to medium stitch densities. Multiple layers can be used for denser designs.

How does this stabiliser improve embroidered designs?

Using a stable backing prevents puckering, thread pull and misaligned stitches, so your finished embroidery looks professional. Because this product is a cut away type, excess material is removed after stitching, leaving a clean perimeter around the design.

• Provides permanent structural support to maintain design shape through wear.
• Reduces fabric stretch and distortion during stitching.
• Helps preserve stitch definition on textured or heavy fabrics like fleece and denim.

What fabrics and projects is the New brothread cut away best for?

This stabiliser is formulated for fabrics that move or distort when embroidered: knits, fleece, sweatshirt material and denim are ideal candidates. It’s also suitable for hoop embroidery, applique, computerized lace and decorative stitch sewing where a lasting backing is preferred.

• Knits and T‑shirts — keeps jersey fabric from stretching under the needle.
• Fleece and sweatshirts — supports pile and prevents sinking stitches.
• Denim and woven garments — stabilises heavy or loosely woven cloth during dense stitching.

How do I use the precut 10"×12" sheets with my hoop and machine?

Hoop the stabiliser together with your fabric so both layers sit taut and aligned; embroider the design as usual. After stitching, roughly trim away the excess stabiliser and then carefully snip close to the stitches with sharp scissors to finish the edge.

• Place fabric over the precut sheet and align in the hoop for even tension.
• Stitch the embroidery design according to machine settings and thread density.
• Trim excess stabiliser away, then use fine scissors to trim close to the satin or outline stitches.

Which stitch densities and layering options are recommended?

New brothread’s stabiliser is medium weight (approximately 2.5 oz / 70 g) and suits light to medium stitch densities. For designs with very high stitch counts or heavily filled areas, add a second layer of stabiliser or pair with a temporary topping to guard against sinking.

• Light to medium density designs — single layer is typically sufficient.
• High density or very large fills — use two layers or combine with a cut‑away plus a water‑soluble topping.
• Test stitch on scrap fabric first to confirm results and adjust layers as needed.

Who is this for? New brothread Cut Away Embroidery Stabiliser is aimed at hobbyists, small business embroiderers and garment decorators who need a reliable, permanent backing that saves prep time with precut sheets. It’s particularly useful for anyone working with stretchy or textured fabrics who wants durable, well‑defined embroidery without allergic‑irritant concerns, since the material is acid- and lead‑free.