Honcaring Epoxy Resin 1.89 L Clear 1:1 Casting & Coating Kit — High-Gloss, Low-Bubble Finish

Honcaring Epoxy Resin 64 oz is a clear, 1:1 mixing ratio casting and coating kit formulated to deliver a high-gloss, low-bubble finish for crafts, coatings, and jewellery.

This all-in-one kit supplies 32 oz of resin and 32 oz of hardener plus stirring tools, measuring cups, gloves and mica pigments so you can start casting or coating immediately. Designed for hobbyists and small projects, the formula is self-leveling, low-odour, and engineered to cure hard and resist yellowing — making it suitable for coasters, preserved flowers, wood projects, jewellery, and decorative pieces.

How do I prepare and mix the Honcaring epoxy for best results?

Clean, dry surfaces and moulds are essential; dust or moisture can trap bubbles and affect cure. Measure resin and hardener precisely at a 1:1 volume ratio, stir gently but thoroughly, and pour promptly to avoid premature thickening.

• Measure equal volumes by cup or graduated container included in the kit.
• Stir slowly for several minutes, scraping sides and bottom to ensure full blend.
• Warm thicker resin bottles in hot water (1–2 minutes) during cold weather for easier mixing.
• Pour into prepared moulds or onto surfaces immediately after mixing to prevent viscosity rise.

What steps reduce bubbles and create a glass-like shine?

The resin’s self-leveling nature and low-odour formula already minimize bubbles, but a few technique tweaks yield the clearest finish. Allow mixed resin to sit briefly to release trapped air, and use gentle heat or a dedicated bubble tool if needed.

• Let mixed resin rest for a few minutes to let micro-bubbles rise and pop.
• Pass a heat gun or torch lightly over the surface for large bubbles (keep moving, avoid overheating).
• Work in a warmer room to lower viscosity and help bubbles escape naturally.
• Avoid over-mixing, which introduces more air into the blend.

How long does Honcaring epoxy take to cure and how durable is the finish?

Initial tack-free time is short, with a standard 24-hour cure for typical pours under recommended conditions; full hardness develops afterward. The cured surface is hard, scratch-resistant and formulated to resist yellowing over time when used properly.

• Typical cure: approximately 24 hours to handle; full cure over several days depending on layer thickness and temperature.
• Hard, glass-like finish that maintains colour vibrancy and resists minor scratches.
• Faster curing in warm weather—pour quickly after mixing in hot conditions.
• Thicker pours may require longer cure times and staged layering to avoid excessive heat buildup.

What can I make with this epoxy kit and what accessories are included?

This kit supports a wide variety of small-scale creative projects, from jewellery and coasters to art coatings and preserved botanicals. Honcaring includes tools and pigments so beginners can start experimenting straight away.

• Included: 1×32 oz resin, 1×32 oz hardener, scraper, 10 wooden stir sticks, 5 plastic stir sticks, 4 rubber gloves, 10 measuring cups, 6 mica pigments (10g each).
• Ideal uses: casting small objects, coating tabletops or wood pieces, making jewellery, coasters, and encapsulating flowers or keepsakes.
• Works with silicone moulds and adheres well to prepared wood and other porous surfaces.
• Additional items like a heat gun or bubble remover can improve finish quality (sold separately).

Who is this for: This Honcaring kit is aimed at hobbyists, makers, crafters and DIY woodworkers who want a user-friendly, ready-to-use epoxy system for clear casts and glossy coatings. It’s especially useful for beginners who appreciate included measuring tools and pigments, as well as experienced creators needing a reliable, non-yellowing clear resin for art, jewellery or home décor projects.