Honcaring Epoxy Resin 3.79 L Clear — 1:1 Casting & Coating Kit, Low-Bubble High-Gloss

Honcaring Epoxy Resin 1 Gal Clear is a 1:1 casting and coating kit that delivers a high-gloss, low-bubble finish for coasters, jewellery, woodwork and preserved flowers.

This all-inclusive kit supplies one gallon of clear epoxy resin formulated for transparent pours and protective coatings. It arrives with measuring cups, pipettes, stirrers, spreaders and gloves so you can mix, tint and pour without hunting for extra tools. Designed to self-level and resist yellowing, the resin works for both thin topcoats and thicker casting projects when used per instructions.

How do I mix and cure this epoxy resin properly?

Mix equal parts resin and hardener by volume (1:1) and stir until uniformly blended. Work in a warm area for smoother pours, pour promptly, and allow the blend to self-level and cure undisturbed for at least 24 hours for handling strength; full hardness develops over longer periods.

• Use the included measuring cups for accurate 1:1 volumes.
• Stir gently but thoroughly to reduce air entrapment.
• Warm bottles briefly in hot water in cold conditions before mixing.
• Cover your pour to keep dust off while curing.

What surfaces and projects are best suited for this product?

The resin is versatile for coating tabletops, sealing artwork, embedding keepsakes, making coasters and casting small moulds. It bonds well to wood, silicone moulds and many mixed-media surfaces when those surfaces are clean and dry.

• Coating and sealing painted or wooden surfaces for a clear glossy finish.
• Casting jewellery, coasters and small decorative objects in silicone moulds.
• Preserving flowers and photos by encapsulating them in clear resin.
• Using pigments or mica powders for colourful custom pieces.

How does Honcaring reduce bubbles and yellowing over time?

The formula is designed to minimize bubbles during cure and to maintain clarity with a high-gloss, scratch-resistant surface. Proper technique — warm environment, measured mixing and allowing brief self-defoaming — further reduces trapped air and improves long-term clarity.

• Low-odour, self-leveling formula helps bubbles rise and dissipate.
• Let mixed resin sit briefly after stirring to allow bubbles to pop.
• Use a heat gun or torch briefly to remove surface microbubbles if needed.
• Avoid over-thinning; follow manufacturer temperature and curing notes.

Who is this for: Makers, hobbyists and small-scale artisans who want a reliable, ready-to-use clear epoxy for casting and coating. The included accessories save time for beginners, while the clear, non-yellowing formulation and scale (one gallon) suit more ambitious woodworkers, jewellery designers and decor creators who need consistent, glossy results without sourcing separate tools.