YaHoGa 10-Pack 30-Inch #5 Separating Jacket Zippers — Assorted Colours, Left-Hand Sliders

These are YaHoGa 10-pack 30-inch #5 separating plastic jacket zippers, each in a different colour, designed for replacing or creating coats, jackets and costume garments.

Whether you're a home sewer, costume maker, or clothing repairer, this set gives you ten full-length separating zippers in assorted shades so you can match trims, test colorways, or keep spares on hand. Each zipper measures 30 inches of teeth (31 inches end-to-end) and uses a #5 plastic tooth profile with left-handed sliders—practical for most outerwear projects. The package contains one zipper of each colour for variety and convenience, letting you work quickly without dyeing or hunting for single pieces.

How long are these zippers and will they fit my jacket pattern?

Each zipper provides 30 inches of functional teeth length; measured end-to-end the tape runs approximately 31 inches. That length suits many full-length jackets and long coats; for shorter garments you can shorten the tape by trimming and reinstalling the stopper.

• Teeth length: 30 inches (full length use)
• Total tape length: ~31 inches end-to-end
• To shorten: trim tape, add a new top/bottom stop, resew or serge
• #5 plastic teeth fit standard jacket zipper feet and sliders

What makes these YaHoGa zippers good for sewing and repairs?

The #5 plastic teeth balance strength and flexibility, making them easy to sew into many fabrics without snagging or stiffening the garment. The separating design lets you fully open the front of a jacket or coat, and the included left-handed sliders match patterns that expect that orientation.

• Separating style for full-front opening garments
• #5 plastic teeth provide durable, low-profile closure
• Left-handed sliders compatible with many coat patterns
• Ready-to-use tape for hand- or machine-sewing

Can I use these zippers for costumes and craft projects?

Yes — the assortment of ten colours makes this pack ideal for costume design, cosplay, and crafting where visual contrast or quick colour matches matter. One zipper per colour minimizes waste and gives you options when experimenting with trims or fabric combinations.

• 10 different colours, one zipper each for flexible design choices
• Suitable for costumes, outerwear, bags, and decorative projects
• Plastic teeth are lightweight for wearable costumes
• Easy to sew onto mesh, fleece, cotton, or woven fabrics

How do I install or shorten these separating zippers safely?

Installing a separating zipper is straightforward with basic sewing skills: baste the zipper into place, stitch with a zipper foot, and add stops if you trim the tape. If you need a shorter length, cut the tape at the desired point and clamp or sew a new stopper to prevent the slider from coming off.

• Fit and baste zipper before final stitching
• Use a zipper foot on the sewing machine for neat seams
• Trim tape and add top/bottom stops if shortening
• Left-handed slider orientation: confirm placement before sewing

Who is this for? This YaHoGa pack is built for hobby sewers, small clothing brands, cosplay makers, and repair shops that need a range of reliable, ready-to-use separating zippers without ordering singles. It’s also convenient for sewing classrooms and craft groups that benefit from an assortment of colours and the practical #5 plastic tooth strength for outerwear and costume applications.