TAKIMO Crystal Clear Epoxy Resin 7.57 L Kit — 1:1 Self-Leveling, Bubble-Reducing Finish

TAKIMO Crystal Clear Epoxy Resin 2 Gallon Kit is a bubble-reducing, self-leveling 1:1 epoxy system that cures to a hard, high-gloss, crystal-clear finish for casting, coating and art projects.

This two-gallon kit (1 gallon resin + 1 gallon hardener) is formulated for makers who want glass-like clarity without complicated ratios. With a low-viscosity, self-leveling formula and a 35–40 minute working time, the resin is designed to flow smoothly, release trapped air, and deliver a durable finish suitable for tabletops, coasters, jewellery, moulds and artistic pours.

How does this epoxy help me achieve a bubble-free, glass-like surface?

TAKIMO’s low-viscosity formula reduces trapped air on pour and encourages bubbles to rise and pop before curing. The recommended layering and gentle torching or heat-gun finishing make it easy to get a clear, reflective surface without cloudiness.

• Low-viscosity, self-leveling resin improves air release
• 35–40 minute working time gives time to settle and de-gas
• Thin pours (up to 1/4 inch) minimize internal stress and bubbles
• Surface torch/heat can be used to remove microbubbles quickly

What is the correct mixing method and curing timeline?

Mix equal parts Resin A and Hardener B by volume in a clean container and stir thoroughly until uniform. Proper mixing and scraping sides and bottom of the mixing vessel prevents uncured spots; initial handling time is 35–40 minutes and reachable hardness and handling strength develop within 24 hours.

• Simple 1:1 volume ratio—no complex weight conversions
• Mix slowly to avoid introducing bubbles; scrape container
• Working time: ~35–40 minutes at room temperature
• Initial cure: firm surface at ~24 hours; full cure over several days

What surfaces and projects is this resin best suited for?

This epoxy is formulated for a wide range of decorative and functional projects where clarity and durability matter. It bonds to prepared wood, moulds, metal findings and a variety of art substrates, and it accepts mica, pigments, glitter and dried inclusions for custom effects.

• Coating and sealing tabletops, trays, bar tops and wood art
• Casting small pieces like coasters, jewellery and river-table fills
• Embedding dried flowers, pigments, mica and glitter safely
• Compatible with many mould types and resin art techniques

How durable and heat-resistant is the finished surface?

When fully cured, TAKIMO epoxy produces a hard, glossy finish with high surface hardness suitable for everyday use and display pieces. It resists scratching and holds up to moderate heat, making it practical for decorative tabletops and functional art when used within its limits.

• Shore D hardness typically reaches about the high-70s after initial cure
• Heat resistance around 203°F (95°C) for brief exposures
• Hard, impact-resistant surface for decorative and light-utility uses
• Not intended for continuous, high-temperature contact

Who is this for: Makers who want a reliable, easy-to-use epoxy that balances clarity, working time and durability. Beginners will appreciate the 1:1 mixing and forgiving working window, while experienced resin artists will value the low-bubble formula and compatibility with pigments and inclusions. Use it for home décor, handcrafted gifts, jewellery pieces, tabletop restorations and layered casting projects where a high-gloss, crystal-clear finish is desired.