CRAFTMEMORE 30mm Brushed Brass D-Rings — 6pc Pack, 4–6mm Thickness, Individually Wrapped

CRAFTMEMORE 6pcs 30mm brushed brass D-rings are sturdy purse and strap hardware sold as a set of six, each individually wrapped to prevent scratches.

These D-rings are fastening components for purses, bag straps, belts, garments and leathercraft projects. Finished in a warm brushed brass, they fit webbing or straps with an inside width of approximately 30mm (about 1-3/16"), and their 4–6mm metal cord thickness provides a balance of strength and flexibility for everyday use. The pack arrives with each piece protected to maintain the finish and reduce blemishes while you store or transport them.

What makes these D-rings suitable for bag and strap projects?

These D-rings are designed for practical attachment points on handmade or repaired bags, offering a reliable loop for straps and clips. The brushed brass finish gives an attractive vintage look while resisting visible fingerprints. Their metal thickness supports moderate loads without bending, and the individually wrapped presentation keeps each ring pristine until install.

• 30mm inside width fits many common webbing and leather strap widths.
• Brushed brass finish for a warm, low-gloss appearance.
• 4–6mm cord thickness balances strength with manageable weight.
• Individually wrapped to protect surface finish during storage and shipping.

How do I install these D-rings on a purse or strap?

Installation is straightforward whether you sew or rivet the loop: slide the strap through the flat side of the D and fasten the strap end to the bag body. For thicker leather, fold the leather over the straight side of the D and secure with stitching, rivets, or heavy-duty adhesive. If using webbing, ensure the strap lays flat inside the curve of the D to avoid twisting or wear.

• Sew leather or fabric through the straight edge and back for secure attachment.
• Use rivets or Chicago screws for no-sew installations on thicker materials.
• Trim strap ends and burnish or seal to prevent fraying on fabric webbing.
• Test load capacity before full use on heavy bags or equipment.

Which strap widths and projects are compatible with 30mm D-rings?

The 30mm inside width is ideal for straps roughly 28–30mm (about 1-1/8" to 1-3/16") wide, commonly used on crossbody bags, small shoulder bags, camera straps, and belts. If you need different sizes, CRAFTMEMORE offers other D-ring widths in their storefront to match narrower or wider webbing. Consider the strap thickness as well, since very bulky straps may not seat properly inside the curve of the ring.

• Best for 28–30mm wide webbing or leather straps.
• Perfect for crossbody and small shoulder bag applications.
• Works on camera straps, pet leashes, and light belts with matching width.
• Other sizes available from the brand for alternative widths.

How do I care for and maintain the brushed brass finish?

The brushed brass finish resists minor scratches and hides fingerprints, but regular care will keep it looking its best. Wipe hardware with a soft, dry cloth after handling and avoid harsh chemicals or abrasive cleaners that can strip the finish. If a deeper clean is needed, use a mild soap and water solution applied gently, then dry immediately to avoid water spots.

• Wipe with a soft, dry cloth after use to reduce oils and dirt buildup.
• Avoid abrasive cleaners, acids, and prolonged moisture exposure.
• Store in a dry place; the individual wrapping helps prevent scratches.
• Replace hardware if any bending or severe wear appears under heavy load.

Who is this for: Craftspeople, bag designers, leatherworkers and hobby sewers who need reliable, attractive fastening hardware in a warm bronze tone will find these 30mm CRAFTMEMORE D-rings useful. This pack of six suits small production runs, repairs or multiple projects where consistent width and finish matter. If you require a different inside width, check the CRAFTMEMORE storefront for alternative sizes and matching slides or loops.