Coniuty DIY Fluid Bear pour-paint kit — 9" black, white & gold marbled display bear with keychain and starter tools

The Coniuty DIY Fluid Bear + Bear Keychain Figure is a complete pour-paint starter kit that lets you create a glossy, marbled 9-inch display bear and matching 3.15-inch keychain using three artist-selected acrylic colours.

This kit bundles a movable-jointed PVC 9-inch (23 cm) bear mould, a small keychain version, three curated acrylic paints, and all the tools you need for pour-style fluid art. It’s designed so beginners can produce eye-catching fluid bear figures for shelf display, social media content, or as a handmade gift. The included supplies and step pointers help control colour blending so your finished piece stays vibrant rather than muddy.

How do I get a clean marbled effect without the colours turning brown?

Successful pour-paint results depend on measured colour choices and pouring technique. Use the three paints in thin layers or single drips rather than dumping many shades at once, and keep the bear horizontal when filling recessed limbs to avoid paint pooling and bare spots.

• Use the provided paper cup and spoon to layer paint instead of mixing too many colours together.
• Angle the bear body horizontally to pour into arms and legs, preventing missed areas.
• After covering limbs, stand the bear upright and drip from head down for even coverage.
• Allow 24–48 hours of drying away from direct sunlight to avoid discolouration.

What tools and materials are included for first-time pour painters?

This Coniuty set is tailored for beginners: it supplies a full XL bear, a small keychain twin, three acrylic paints chosen by an artist, plus practical accessories to make pour painting manageable and tidy.

• One 9" (XL) movable-joint PVC bear figure and one 3.15" keychain figure.
• Three acrylic paint bottles selected for complementary results.
• Gloves, a protective table cover, a brush, dropper, spoon, and disposable cup for mixing and pouring.
• Simple usage guidance to help avoid common beginner mistakes.

How do I use the movable limbs to improve my final look?

Adjusting the arms and legs allows you to control where paint settles and how much is exposed on different surfaces. Pose limbs to create sheltered pockets for paint in narrow areas, then change position for a second pass if you want layered effects.

• Move arms and legs to open cavities before initial pouring to ensure coverage.
• Pour smaller amounts into limbs first, then reposition the bear to coat the torso.
• Use a dropper for precise application around the neck and joints.
• Repose limbs after partial drying for deliberate layered bands of colour.

How long until the bear is fully dry and display-ready?

Dry time varies by paint thickness and room conditions, but typically allow one to two days for surface cure. Keep the piece in a dust-free area away from direct sunlight and heavy humidity to avoid surface defects during curing.

• Typical drying window: 24–48 hours for average layers.
• Thicker pours may need longer; avoid handling until firm to the touch.
• Dry indoors on a level surface to prevent runs and uneven curing.

Who is this for: Makers who enjoy hands-on DIY decor, social-media creators wanting a viral-friendly craft, teachers organizing an art activity, or anyone searching for a beginner-friendly pour-paint experience. The Coniuty Fluid Bear kit suits hobbyists who want a guided, low-barrier project with presentable, repeatable results — whether you’re crafting solo, with friends, or as part of a classroom or party activity.