BEAMNOVA 58mm Button Maker Supplies 100-Set Refill — Metal Back Pin Components, Mylar Protective Film

BEAMNOVA 100 Sets 58mm button maker supplies are a complete refill pack of metal-back pin components (top cover, metal pin back, and clear plastic film) designed to create 100 durable 58mm (2.28 in) badges.

These replacement parts let you turn printed artwork and photos into finished pin-back buttons when paired with a compatible 58mm button press. The kit uses tinplate metal backs and tops plus a transparent plastic mylar film to protect printed graphics; recommended paper weight and cutting sizes help you get professional-looking results. Note: the button press machine and rubber ring are not included.

How do I prepare artwork and cut for these 58mm button parts?

Print your design on coated or inkjet paper in the recommended weight range, then trim to the suggested diameter so the image seats evenly beneath the plastic film. Accurate cuts reduce wrinkling and ensure the artwork aligns with the metal edge for a clean finished badge.

• Recommended paper: 100–157 g/m² (coated or colour inkjet).
• Thin film diameter: 70mm / 2.76 in; cut paper to match film.
• Use a circle cutter or template sized to 70mm for consistent results.
• Check orientation before pressing to avoid upside-down prints.

Will these parts fit my button maker machine?

These BEAMNOVA parts are made for 58mm/button press setups, but not all brands have identical tolerances. They work with many standard presses, especially BEAMNOVA models, though compatibility with other manufacturers' machines may vary.

• Parts designed for 58mm (2.28 in) finished buttons.
• Metal pin bottoms and tinplate tops for greater durability.
• May require testing in non-BEAMNOVA presses due to fitting differences.
• If needed, search for BEAMNOVA pin button maker for matched machines.

What tools and extras do I need to finish 100 badges?

Besides this 100-set refill pack, you’ll need a compatible button press machine, a rubber ring or replacement o-ring for the die, and cutting tools for paper. A simple circle punch or an electronic cutter speeds production if you plan to make many buttons.

• Button press machine (not included) sized for 58mm parts.
• Rubber ring or adapter—often supplied with the machine; can improvise with cardboard for prototypes.
• Circle cutter, punch, or pre-cut paper circles (70mm recommended).
• Quality inkjet or coated paper for sharp, vivid prints.

Who is this for: Creators, craft sellers, and event organisers who want sturdy, metal-backed 58mm pin buttons for promotions, booths, or personal projects. This pack is ideal if you already own a compatible button press (especially BEAMNOVA presses) and need durable metal components to produce up to 100 finished badges quickly and affordably.