{"product_id":"smooth-on-smooth-cast-300-polyurethane-casting-resin-bright-white-pint-ultra-low-viscosity-10-min-demold","title":"Smooth-On Smooth-Cast 300 polyurethane casting resin, Bright White pint — ultra low viscosity, 10-min demold","description":"\u003cp\u003e\u003cstrong\u003eSmooth-Cast 300 is a two-part, ultra low-viscosity polyurethane casting resin that produces bright white, virtually bubble-free castings with a quick 10-minute demold time.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a fast, easy-to-use plastic for prototypes, props, or production parts, Smooth-Cast 300 delivers a user-friendly 1:1 mix and a pourable, free-flowing formula that reaches a rigid Shore 70D finish. Its low viscosity helps air escape during fill so most pours don’t require vacuuming, and fully cured parts can be sanded, drilled, painted, or machined. Read the product safety data before use and ensure adult supervision where required.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast does Smooth-Cast 300 cure and how does that affect production?\u003c\/h3\u003e\n\u003cp\u003eSmooth-Cast 300 offers a short working window and a rapid demold, making it suited for quick cycles and small-batch production. Because the pot life and cure are brief, plan mixing and pouring steps in advance to avoid waste.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePot life: approx. 3 minutes — mix and pour quickly\u003c\/li\u003e\n  \u003cli\u003eDemold time: about 10 minutes at room temperature\u003c\/li\u003e\n  \u003cli\u003eIdeal for multiple repeat pours per hour in low- to medium-volume runs\u003c\/li\u003e\n  \u003cli\u003eFast setup reduces tack and speeds finishing operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I get bubbles, and do I need special equipment to degas?\u003c\/h3\u003e\n\u003cp\u003eThe formulation is designed to flow into fine details and release trapped air more readily than higher-viscosity resins. In many standard mould situations vacuum degassing isn’t necessary, though complex moulds or thin sections may still trap air.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUltra-low viscosity encourages natural air release\u003c\/li\u003e\n  \u003cli\u003eMost pours are bubble-free without vacuum or pressure chambers\u003c\/li\u003e\n  \u003cli\u003eUse gentle vibration or slow pouring to further reduce entrapped air\u003c\/li\u003e\n  \u003cli\u003eFor critical parts, pressure casting or vacuum degassing can still be used\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the mechanical and finishing characteristics of cured parts?\u003c\/h3\u003e\n\u003cp\u003eWhen fully cured, Smooth-Cast 300 produces rigid, bright-white pieces that are durable enough for handling, machining, and final finishing. The surface accepts paints and coatings well and can be sanded to remove small flaws.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShore hardness around 70D — rigid and tough\u003c\/li\u003e\n  \u003cli\u003eBright white finish works as a neutral base for paints and pigments\u003c\/li\u003e\n  \u003cli\u003eCan be sawed, drilled, sanded, or shaped with standard tools\u003c\/li\u003e\n  \u003cli\u003eSuitable for display pieces, models, props, and functional prototypes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I mix and pour Smooth-Cast 300 safely and accurately?\u003c\/h3\u003e\n\u003cp\u003eMix equal volumes of Part A and Part B; no precise weighing is required if you measure strictly by volume. Work in a well-ventilated area, wear appropriate gloves and eye protection, and consult the MSDS for full safety guidelines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMix ratio: 1:1 by volume for Parts A and B\u003c\/li\u003e\n  \u003cli\u003eUse clean, dry containers and stir thoroughly but quickly\u003c\/li\u003e\n  \u003cli\u003eAvoid prolonged exposure — follow personal protective recommendations\u003c\/li\u003e\n  \u003cli\u003eKeep out of reach of children and store according to manufacturer instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Smooth-Cast 300 is aimed at creatives and professionals who need fast-turnaround rigid castings with a bright-white finish — model makers, prop builders, product designers, hobbyists, and small-scale manufacturers will appreciate the quick cure, easy 1:1 mix, and machinable final parts. If you require flexible rubber-like parts, much longer working time, or specialized food\/medical compliance, review product specifications and consider alternatives designed for those needs.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the mix ratio for Smooth-Cast 300?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mix equal parts by volume of Part A and Part B (1:1).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a vacuum chamber to prevent bubbles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most pours are bubble-free without vacuum due to the low viscosity, though complex moulds may benefit from vacuum or pressure casting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Smooth-On","offers":[{"title":"Default Title","offer_id":55297676771665,"sku":"B004BN7G0E","price":65.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/smooth-on-smooth-cast-300-front-pint.jpg?v=1791959447","url":"https:\/\/craftiche.co.uk\/products\/smooth-on-smooth-cast-300-polyurethane-casting-resin-bright-white-pint-ultra-low-viscosity-10-min-demold","provider":"Craftiche","version":"1.0","type":"link"}