{"product_id":"smooth-on-mold-star-16-fast-platinum-silicone-mold-rubber-pint-1-1-mix-fast-cure-tear-resistant","title":"Smooth-On Mould Star 16 Fast platinum silicone mould rubber, Pint — 1:1 mix, fast cure, tear-resistant","description":"\u003cp\u003e\u003cstrong\u003eSmooth-On Mould Star 16 Fast is a two-part, 1A:1B by volume platinum silicone rubber that cures quickly into a soft, tear-resistant mould ideal for casting wax, resin, gypsum, concrete and other materials.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for artists, prototypers and small-run manufacturers, Mould Star 16 Fast combines an easy 1:1 mix ratio with a short pot life and fast demold time so you can move from mould-making to casting in under an hour. This pint kit gives enough material for small to medium moulds and eliminates weighing by letting you measure equal volumes of part A and part B. The cured rubber offers flexibility and strength for repeat castings while being compatible with a wide range of casting materials.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will Mould Star 16 Fast set and when can I demold?\u003c\/h3\u003e\n\n\u003cp\u003eThe silicone has a pot life of about 6 minutes and typically cures to handling strength in roughly 30 minutes under ambient conditions. Actual times depend on temperature, humidity and the thickness of your pour.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePot life: ~6 minutes at room temperature\u003c\/li\u003e\n  \u003cli\u003eCure\/demold time: ~30 minutes for standard pour thicknesses\u003c\/li\u003e\n  \u003cli\u003eLonger cures at lower temperatures; faster at warmer conditions\u003c\/li\u003e\n  \u003cli\u003eThin sections can take less time to gel, thicker sections may need more time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials can I cast into moulds made with this silicone?\u003c\/h3\u003e\n\n\u003cp\u003eMould Star 16 Fast produces a soft but durable rubber compatible with many common casting media. It works well for flexible reproductions where easy release and minimal undercut locking are desired. Avoid prolonged contact with certain solvents unless tested first.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSuitable for wax, resin, gypsum (plaster) and concrete\u003c\/li\u003e\n  \u003cli\u003eWorks with polyurethane and acrylic resins (test for inhibition)\u003c\/li\u003e\n  \u003cli\u003eNot intended as an elastomeric structural adhesive\u003c\/li\u003e\n  \u003cli\u003eAlways test new material combinations for compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I mix and measure Mould Star 16 Fast accurately?\u003c\/h3\u003e\n\n\u003cp\u003eThe product mixes 1A:1B by volume, so you can dispense directly by cup or syringe without a scale. Stir thoroughly to avoid unmixed streaks, scrape the container sides and bottom, and degas if bubble-free surfaces are critical. Use a clean, dry mixing container and tools for consistent results.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMix ratio: 1 part A to 1 part B by volume — no weighing needed\u003c\/li\u003e\n  \u003cli\u003eStir method: scrape sides and bottom, mix for recommended time\u003c\/li\u003e\n  \u003cli\u003eDegassing: vacuum chamber recommended for bubble-free moulds\u003c\/li\u003e\n  \u003cli\u003eWork quickly due to the short pot life; plan pours in advance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat physical properties and handling tips should I know?\u003c\/h3\u003e\n\n\u003cp\u003eThe cured rubber balances softness with tear resistance, making it suitable for moulds that require flexibility and repeated use. It trims cleanly and holds fine surface detail, but thicker pours and colder conditions increase cure time. Store unused material in a cool, dry place and consult SDS for safety data.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSoft, tear-resistant cured rubber with good detail reproduction\u003c\/li\u003e\n  \u003cli\u003eTrims easily with hobby knife or scalpel\u003c\/li\u003e\n  \u003cli\u003eStore away from heat and direct sunlight to maintain shelf life\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer safety recommendations and SDS\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Smooth-On Mould Star 16 Fast is best suited for hobbyists, prop-makers, and small-studio artists who need a fast-curing, easy-to-measure silicone for small to medium moulds. It’s also useful for rapid prototyping and short production runs where speed and reliable detail capture matter. If you require long working time, very high tear strength, or large-volume moulds, consider Smooth-On’s other platinum silicone grades tailored to those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a scale to mix Mould Star 16 Fast?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the mix ratio is 1A:1B by volume, so you can measure equal volumes without a scale.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I can demold my casting?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typical demold time is about 30 minutes at room temperature, though thicker pours or cooler conditions take longer.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Smooth-On","offers":[{"title":"Default Title","offer_id":55302329565521,"sku":"B00ELLRSY0","price":77.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/smooth-on-mold-star-16-fast-front-pint.jpg?v=1791982428","url":"https:\/\/craftiche.co.uk\/products\/smooth-on-mold-star-16-fast-platinum-silicone-mold-rubber-pint-1-1-mix-fast-cure-tear-resistant","provider":"Craftiche","version":"1.0","type":"link"}