{"product_id":"sculptcoat-soapstone-grey-2-0-brush-on-stone-finish-for-3d-prints-8-oz-pouch-paintable-sandable","title":"Sculptcoat Soapstone Grey 2.0 Brush-On Stone Finish for 3D Prints — 227 g Pouch, Paintable \u0026 Sandable","description":"\u003cp\u003e\u003cstrong\u003eSculptcoat Soapstone Grey 2.0 is a mineral-based, brush-on coating that converts plastic, foam, wood and resin surfaces into a sandable, paintable stone-like finish.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSculptcoat Soapstone Grey is formulated to give models, props and craft projects an authentic soft-grey stone appearance while forming a hard, workable surface once it cures. Designed for hobbyists, prop builders and 3D printing enthusiasts, this water-mixable compound spreads easily by brush, spatula or texture tool and accepts sanding, polishing, painting, weathering and sealing for layered effects. The resealable 8 oz pouch contains enough material for multiple miniatures, small props or test batches and is optimised for adhesion to primed PLA, resin, foam and wood.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Sculptcoat help me make 3D prints look like real stone?\u003c\/h3\u003e\n\u003cp\u003eApplied over properly prepared prints, Sculptcoat fills layer lines and creates a uniform mineral surface that resembles carved soapstone or aged masonry. Once cured it sands down smoothly or can retain textured details for concrete-like appearances.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConceals print lines and minor defects for a seamless stone look\u003c\/li\u003e\n  \u003cli\u003eHard, mineral surface accepts sanding and polishing\u003c\/li\u003e\n  \u003cli\u003ePaintable and receptive to weathering washes for realism\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and materials will it stick to reliably?\u003c\/h3\u003e\n\u003cp\u003eThis formulation bonds well to primed PLA, cured resin, wood, foam, paper-mâché and many display materials when surfaces are clean and key-coated. For best results, roughen glossy plastics and apply a suitable primer or thin bonding layer before Sculptcoat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse on PLA, resin, wood, foam and mixed-media props\u003c\/li\u003e\n  \u003cli\u003ePrime nonporous or glossy parts to improve adhesion\u003c\/li\u003e\n  \u003cli\u003eCompatible with common hobby primers and sealers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply and finish Sculptcoat for different effects?\u003c\/h3\u003e\n\u003cp\u003eMix the pouch product with small amounts of water to reach brushing, spreading or sculpting consistency, then apply with a brush, spatula or texture tool. Thin layers dry faster for smooth carved looks; thicker or stippled layers create rough concrete or aged stone textures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrush-on thin coats for carved soapstone smoothness\u003c\/li\u003e\n  \u003cli\u003eBuild textured layers or stipple for weathered stone effects\u003c\/li\u003e\n  \u003cli\u003eSand, paint or wax after curing to refine or age the finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill Sculptcoat hold up to sanding, painting and sealing?\u003c\/h3\u003e\n\u003cp\u003eYes — once fully cured the mineral surface becomes hard and sandable, allowing you to refine contours and create polished or matte finishes. It accepts paints, washes, waxes and sealers used in modelmaking and prop finishing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSands to smooth or to create carved details\u003c\/li\u003e\n  \u003cli\u003eTakes acrylics, weathering washes and metallic highlights\u003c\/li\u003e\n  \u003cli\u003eSeal with compatible varnish or wax for protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Sculptcoat Soapstone Grey 2.0 is aimed at 3D-print hobbyists, prop and costume builders, scale modelers, miniature painters, terrain creators and mixed-media artists who want a realistic stone finish without heavy casting or stone carving. If you build props, dioramas or printed sculpts and need an easy-to-apply, sandable stone coat that can be painted and aged, this pouch-sized formula offers a practical balance of control and authentic mineral texture.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Sculptcoat on raw PLA without primer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can, but for the best adhesion and fewer failures prime or lightly sand glossy PLA before applying Sculptcoat.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I can sand or paint the coated surface?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Cure time varies by layer thickness and humidity; thin coats typically allow sanding or painting within 12–24 hours.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sculptcoat","offers":[{"title":"Default Title","offer_id":55294513676625,"sku":"B0HF9V5L6N","price":42.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sculptcoat-soapstone-front-pouch.jpg?v=1791931716","url":"https:\/\/craftiche.co.uk\/products\/sculptcoat-soapstone-grey-2-0-brush-on-stone-finish-for-3d-prints-8-oz-pouch-paintable-sandable","provider":"Craftiche","version":"1.0","type":"link"}