{"product_id":"paasche-hg-08-airbrush-hvlp-gravity-feed-touch-up-spray-gun-8mm-compact-adjustable-fan-pattern","title":"Paasche HG-08 Airbrush HVLP Gravity-Feed Touch-Up Spray Gun .8mm — Compact, Adjustable Fan Pattern","description":"\u003cstrong\u003eThe Paasche HG-08 is a gravity-feed HVLP touch-up airbrush with a .8mm nozzle engineered for precise small-area spraying of solvent and water-based finishes.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact spray gun sits between a fine airbrush and a full-size spray gun, giving you controlled coverage for repair work, detail coats, and thin parts. With a gravity-feed cup and adjustable fan pattern, the HG-08 handles thicker coatings like Cerakote and Duracoat while still offering the control needed for touch-ups and small panels.\u003c\/p\u003e\n\n\u003ch3\u003eHow precise is the Paasche HG-08 for touch-up work?\u003c\/h3\u003e\n\u003cp\u003eThe .8mm tip balances atomization and material flow so you can lay down smooth, even coats without over-spraying. It’s sized for small to medium repair areas where an airbrush is too fine and a conventional spray gun is too broad.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e.8mm nozzle for controlled material delivery\u003c\/li\u003e\n  \u003cli\u003eGravity-feed cup for minimal waste and quick colour changes\u003c\/li\u003e\n  \u003cli\u003eAdjustable fan pattern to shift from narrow to wider coverage\u003c\/li\u003e\n  \u003cli\u003eSuitable for single-pass or multi-pass touch-ups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat coatings and materials can this spray gun handle?\u003c\/h3\u003e\n\u003cp\u003eThe HG-08 accepts both solvent- and water-based coatings, making it compatible with modern ceramic and protective finishes. It’s commonly used with products like Cerakote and Duracoat, as well as conventional primers and dyes when properly thinned.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with solvent-based finishes including ceramic coatings\u003c\/li\u003e\n  \u003cli\u003eAccepts water-based paints when mixed according to manufacturer specs\u003c\/li\u003e\n  \u003cli\u003eGood for primers, topcoats, and touch-up colour layers\u003c\/li\u003e\n  \u003cli\u003eUse appropriate strainers and thinning to prevent clogging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the HG-08 connect to my air system and control airflow?\u003c\/h3\u003e\n\u003cp\u003eThe tool uses a 1\/4\" NPT air inlet for familiar, shop-standard hookup. Its HVLP design reduces overspray by transferring more paint to the surface while the regulator and needle control let you tailor output to the job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/4\" NPT air inlet fits common compressor fittings\u003c\/li\u003e\n  \u003cli\u003eHVLP airflow reduces wasted material and keeps edges cleaner\u003c\/li\u003e\n  \u003cli\u003eNeedle and fan adjustments let you fine-tune spray width and volume\u003c\/li\u003e\n  \u003cli\u003eCompact form factor for easier maneuvering in tight areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and setup tips improve performance?\u003c\/h3\u003e\n\u003cp\u003eRegular cleaning after each use and correct thinning of thicker coatings will extend service life and steady atomization. Keep the cup, nozzle, and needle free of residue and use recommended lubricants for moving parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlush the cup and passages immediately after use\u003c\/li\u003e\n  \u003cli\u003eDisassemble and soak nozzle\/needle if material has set\u003c\/li\u003e\n  \u003cli\u003eUse strainers to prevent particulates from clogging the .8mm tip\u003c\/li\u003e\n  \u003cli\u003eInspect seals and threads for wear and replace as needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Paasche HG-08 is ideal for craftsmen, gunsmiths, automotive-detailers, and hobbyists who need more power than a fine airbrush but greater control than a full-size spray gun. If you routinely work on small panels, touch-ups, or specialized coatings like Cerakote or Duracoat, this HVLP gravity-feed unit gives you the balance of precision, material compatibility, and shop-friendly connectivity you need.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the HG-08 spray Cerakote and similar ceramic finishes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it handles Cerakote and similar solvent-based ceramic coatings when materials are prepared and thinned per manufacturer instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What air fitting does the gun use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The HG-08 uses a 1\/4\" NPT air inlet, compatible with standard compressor fittings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Paasche","offers":[{"title":"Default Title","offer_id":55302735266129,"sku":"B00EUWVE8Q","price":80.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/paasche-hg-08-front-profile.jpg?v=1791983089","url":"https:\/\/craftiche.co.uk\/products\/paasche-hg-08-airbrush-hvlp-gravity-feed-touch-up-spray-gun-8mm-compact-adjustable-fan-pattern","provider":"Craftiche","version":"1.0","type":"link"}