{"product_id":"new-brothread-metallic-embroidery-thread-kit-9-basic-colors-40wt-500m-spools-high-gloss-polyester-core","title":"New brothread Metallic Embroidery Thread Kit — 9 Basic Colours, 40wt 500m Spools, High-Gloss Polyester-Core","description":"\u003cp\u003e\u003cstrong\u003eNew brothread's 9 Basic Colours Metallic Embroidery Machine Thread Kit delivers nine high-gloss metallic spools (500m each) designed for machine embroidery, giving projects a polished, shimmering finish.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you embroider emblems, uniforms, decorative trims, or elegant garments, this kit supplies a balanced palette of metallic tones with a polyester core wrapped in metal foil for greater tensile strength and wash resistance. Each spool is 40 weight and 500 meters (550 yards), sized for both small detail work and larger fills. The threads are optimised to reduce breakage and fraying compared with older metallic constructions, while still requiring a few simple machine adjustments to perform at their best.\u003c\/p\u003e\n\n\u003ch3\u003eHow should I set up my machine for metallic thread to avoid breakage?\u003c\/h3\u003e\n\n\u003cp\u003eMetallic thread behaves differently than standard polyester or rayon. Use a large-eye topstitch needle (recommended Topstitch 80\/12 or 90\/14) and place a thread net over the spool if tangling occurs; reduce stitch speed and fine-tune tension so the thread feeds smoothly without excess drag.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNeedles: Topstitch 80\/12 or 90\/14, Organ HAX1 SP 80\/12 or 90\/14.\u003c\/li\u003e\n  \u003cli\u003eThread net: place over spool to prevent snagging and loops.\u003c\/li\u003e\n  \u003cli\u003eSpeed: lower machine speed to approximately ≤600 stitches per minute.\u003c\/li\u003e\n  \u003cli\u003eTension: slowly adjust until metallic thread pulls evenly without puckering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kinds of projects work best with these metallic threads?\u003c\/h3\u003e\n\n\u003cp\u003eThese spools are ideal for decorative and emblem embroidery where shine and definition matter — think logos, crestwork, trim on formalwear, and ornamentation on accessories. The metallic surface highlights edges and raised stitches, giving a luxurious, royal look without overpowering the base fabric.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEmblems \u0026amp; uniforms: crisp sheen for logos and badges.\u003c\/li\u003e\n  \u003cli\u003eDecorative clothing: collars, cuffs, eveningwear accents.\u003c\/li\u003e\n  \u003cli\u003eAccessories: bags, hats, and festive home decor.\u003c\/li\u003e\n  \u003cli\u003eDetail work: couching, outlines, and stitched highlights.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these metallic threads hold up to washing and everyday use?\u003c\/h3\u003e\n\n\u003cp\u003eThe polyester core and metal-foil coating provide improved elasticity and tenacity, helping resist fraying and breakage. The threads are washable and tarnish-resistant when cared for gently; follow mild washing guidelines to keep metallic shine intact over time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWashable: hand or machine wash recommended gently and briefly.\u003c\/li\u003e\n  \u003cli\u003eTemperature: keep water below 95°C and limit wash cycles to 15 minutes.\u003c\/li\u003e\n  \u003cli\u003eDrying: avoid heavy dry friction; air dry when possible.\u003c\/li\u003e\n  \u003cli\u003eDurability: polyester core reduces looping, puckering, and breaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much thread do I get and is the weight suitable for machine work?\u003c\/h3\u003e\n\n\u003cp\u003eEach spool contains 500 meters (550 yards) of 40-weight metallic thread — a widely used weight for embroidery machines that balances visibility and flexibility. The 40 wt size performs well for outlines, fills, and decorative stitches, giving a strong metallic effect without bulk.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLength: 500m (550yd) per spool for extended stitching runs.\u003c\/li\u003e\n  \u003cli\u003eWeight: 40 wt, compatible with common embroidery settings.\u003c\/li\u003e\n  \u003cli\u003eCore: strong polyester centre for higher tensile strength.\u003c\/li\u003e\n  \u003cli\u003eCoating: metal foil finish for high-luster effects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit made for? New brothread's 9 Basic Colours Metallic Embroidery Machine Thread Kit suits hobbyists, small-business embroiderers, and professional stitchers who want reliable metallic shine without constant thread failures. If you work on uniforms, emblems, luxury trims, or seasonal decor and are ready to use the right needle, tension, and feed techniques, this kit gives you nine versatile metallic hues and substantial spool lengths to complete multiple projects with consistent results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use standard needles with metallic thread?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use large-eye topstitch needles (80\/12 or 90\/14) for metallics to reduce shredding and feed issues.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How should I wash items embroidered with this metallic thread?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Wash gently by hand or machine under 95°C for short cycles, avoid harsh friction, and air dry when possible.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"New brothread","offers":[{"title":"Default Title","offer_id":55255268720977,"sku":"B07DMG6511","price":36.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/new-brothread-front-packaging-metallic-thread-kit.jpg?v=1791702153","url":"https:\/\/craftiche.co.uk\/products\/new-brothread-metallic-embroidery-thread-kit-9-basic-colors-40wt-500m-spools-high-gloss-polyester-core","provider":"Craftiche","version":"1.0","type":"link"}