{"product_id":"mitinu-silicone-mold-making-kit-141-oz-20a-platinum-cured-low-viscosity-for-resin-soap","title":"MITINU Silicone Mould Making Kit 4.17 L (20A) — Platinum-Cured, Low-Viscosity for Resin \u0026 Soap","description":"\u003cp\u003e\u003cstrong\u003eMITINU Silicone Mould Making Kit is a complete 141 oz (approx.) platinum-cured liquid silicone set formulated at 20A hardness for easy-to-make, durable custom moulds.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one kit supplies both Part A and Part B silicone, colour pigments, disposable tools, and instructions so you can start crafting professional-looking moulds the moment you open the box. Designed for hobbyists and small studios, the silicone cures at room temperature with minimal shrinkage, is low-viscosity for bubble-free pours, and mixes 1:1 by weight to simplify preparation.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this silicone cure and do I need special equipment?\u003c\/h3\u003e\n\n\u003cp\u003eThe MITINU silicone offers a working time of about 30–40 minutes and typically reaches full cure in 3–6 hours at room temperature (around 73.4°F \/ 25°C), depending on mould thickness. No vacuum degassing is required because its low viscosity allows most air bubbles to dissipate naturally within roughly two hours.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorking time: ~30–40 minutes for mixing and pouring.\u003c\/li\u003e\n  \u003cli\u003eRoom-temperature cure: generally 3–6 hours for standard moulds.\u003c\/li\u003e\n  \u003cli\u003eOptional heat curing can accelerate the process for faster turnaround.\u003c\/li\u003e\n  \u003cli\u003eNo vacuum or pressure pot normally needed thanks to self-degassing properties.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and projects does this silicone work with?\u003c\/h3\u003e\n\n\u003cp\u003eMITINU platinum-cured silicone is formulated for wide compatibility, making it suitable for casting resin, plaster, wax, soap, candles, and certain low-temperature food-safe items when using appropriate secondary materials. Its translucent base accepts mica and pigments well, enabling coloured moulds or aesthetic effects for creative projects.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eResin casting for jewellery, miniatures, and ornaments.\u003c\/li\u003e\n  \u003cli\u003eCandle and soap mould creation (follow safety guidelines for food or skin contact items).\u003c\/li\u003e\n  \u003cli\u003ePlaster, clay, and wax reproduction for art and prototyping.\u003c\/li\u003e\n  \u003cli\u003eMixes well with included mica powders for decorative or translucent moulds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the mixing and pouring process for beginners?\u003c\/h3\u003e\n\n\u003cp\u003eMixing is straightforward: the kit is 1:1 by weight (Part A to Part B), so you don’t need complicated measurements or special pumps. Stir thoroughly for about three minutes, scraping sides and bottom to ensure even blend; included wooden sticks and disposable gloves make cleanup and handling simple for newcomers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMix ratio: 1:1 by weight — no complex calculations.\u003c\/li\u003e\n  \u003cli\u003eStir time: approximately 3 minutes for consistent cure and strength.\u003c\/li\u003e\n  \u003cli\u003eTools included: 5 wooden mixing sticks, 6 disposable gloves, opener, and instructions.\u003c\/li\u003e\n  \u003cli\u003eLow-odour, non-toxic platinum formula reduces handling concerns compared to solvent-based systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and finish can I expect from finished moulds?\u003c\/h3\u003e\n\n\u003cp\u003eThe platinum-cured silicone delivers low shrinkage, excellent flexibility, and high tear resistance so moulds maintain detail and last through repeated use if cared for properly. The finished moulds remove fine textures cleanly and withstand typical casting materials without deforming under normal use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e20A shore hardness balances flexibility and detail retention.\u003c\/li\u003e\n  \u003cli\u003eHigh tear strength supports repeated demolding of detailed casts.\u003c\/li\u003e\n  \u003cli\u003eNegligible shrinkage preserves dimensions of originals and reproductions.\u003c\/li\u003e\n  \u003cli\u003eTranslucent cured finish helps inspect trapped air and fill level during casting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The MITINU Silicone Mould Making Kit is built for crafters, small-business makers, jewellery and soap makers, prop builders, and educators who want an all-inclusive, beginner-friendly system that scales to more advanced projects. If you need a reliable 1:1 silicone with fast cure options, good tear resistance, and included pigments and tools, this kit gives you the core materials to prototype, reproduce, and produce small runs of detailed castings without additional purchases.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a vacuum chamber to remove bubbles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. MITINU’s low-viscosity formula allows most bubbles to dissipate naturally; vacuum degassing is usually unnecessary.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the mix ratio for Part A and Part B?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mix Part A and Part B 1:1 by weight and stir thoroughly for about three minutes before pouring.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MITINU","offers":[{"title":"Default Title","offer_id":55301871829329,"sku":"B0FJ8S9JGP","price":95.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/mitinu-front-packaging-kit.jpg?v=1791980504","url":"https:\/\/craftiche.co.uk\/products\/mitinu-silicone-mold-making-kit-141-oz-20a-platinum-cured-low-viscosity-for-resin-soap","provider":"Craftiche","version":"1.0","type":"link"}