{"product_id":"lets-resin-silicone-mold-making-kit-30a-platinum-cured-1-1-mix-flexible-detail-capture","title":"LET'S RESIN Silicone Mould Making Kit 30A — Platinum-Cured, 1:1 Mix, Flexible Detail-Capture","description":"\u003cp\u003e\u003cstrong\u003eLET'S RESIN Silicone Moulds Making Kit 30A is a two-part, platinum-cured silicone rubber designed to create flexible, durable moulds for resin, wax, soap and craft casting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit supplies a neutral-scent, blue platinum silicone with a Shore A hardness of 30 — balanced to capture fine detail while remaining flexible enough to release delicate castings. Supplied as Part A and Part B in a 1:1 by-weight ratio, the system mixes quickly, self-degasses, and cures at room temperature into a tear-resistant mould. The formulation is intended for hobbyists, makers and small-batch artisans who need reliable mould performance without specialty tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I mix and pour LET'S RESIN 30A silicone?\u003c\/h3\u003e\n\u003cp\u003eMix equal weights of Part A and Part B thoroughly for 3–5 minutes until the colour is uniform. Pour slowly into your mould box or over your master model; the silicone’s formulation minimizes trapped air so vacuum degassing is usually unnecessary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMixing ratio: 1:1 by weight (use a digital scale for accuracy).\u003c\/li\u003e\n  \u003cli\u003eStirring time: 3–5 minutes, scrape sides and bottom of the container.\u003c\/li\u003e\n  \u003cli\u003ePour technique: pour in a thin stream to reduce surface bubbles.\u003c\/li\u003e\n  \u003cli\u003eCleanup: remove spills with soapy water or rubbing alcohol while uncured.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does the silicone take to cure and when are moulds ready to use?\u003c\/h3\u003e\n\u003cp\u003eAt room temperature the kit provides a short working time and a full room-temperature cure within several hours. Working time is about five minutes, and the silicone typically demolds in roughly 8–12 hours depending on mould thickness and ambient temperature.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking\/open time: ~5 minutes at 20–25°C (68–77°F).\u003c\/li\u003e\n  \u003cli\u003eDemold time: generally 8–12 hours; thicker moulds need longer cure.\u003c\/li\u003e\n  \u003cli\u003eBubble handling: bubbles generally self-rise and dissipate within two hours.\u003c\/li\u003e\n  \u003cli\u003eIf the surface feels tacky after the expected time, extend the cure period.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials can I cast in moulds made with LET'S RESIN silicone?\u003c\/h3\u003e\n\u003cp\u003eMoulds made from this platinum-cured silicone are compatible with many casting media used in craft and small-scale production. They are suitable for resin, wax, plaster, soap and many low-to-medium temperature casting materials, but not formulated for direct food contact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable: epoxy and polyurethane resin, casting wax, glycerin and cold-process soap, gypsum\/plaster.\u003c\/li\u003e\n  \u003cli\u003eAvoid: molten metals or very high-temperature pours; not for food-grade applications.\u003c\/li\u003e\n  \u003cli\u003eSurface release: many materials demold easily due to the silicone’s flexibility.\u003c\/li\u003e\n  \u003cli\u003eFinish: captures fine texture and detail for repeatable castings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit made for? LET'S RESIN 30A is tailored to beginners and experienced crafters who want a reliable, easy-to-use mould-making silicone without investing in vacuum or pressure equipment. If you make jewellery, small sculptures, candles, soap bars, or prototypes and need a low-odour, tack-free cured rubber that retains detail while easing release, this kit is a practical studio choice. Keep in mind it is not certified for food contact, so choose it for decorative, craft and utility casting projects rather than edible moulds.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the LET'S RESIN 30A silicone safe for indoor use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the platinum-cured formula is low odour and non-toxic when cured; ventilate when working and avoid contact with eyes or prolonged skin exposure to uncured silicone.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a vacuum chamber for bubble removal?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — this kit’s formulation self-degasses; vacuum is optional for extremely detailed or deep moulds but usually unnecessary.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LET'S RESIN","offers":[{"title":"Default Title","offer_id":55256359272785,"sku":"B07YWBXVND","price":36.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/lets-resin-front-packaging_ffcfaf47-a6da-4bfc-ac76-7287272fc26c.jpg?v=1791713748","url":"https:\/\/craftiche.co.uk\/products\/lets-resin-silicone-mold-making-kit-30a-platinum-cured-1-1-mix-flexible-detail-capture","provider":"Craftiche","version":"1.0","type":"link"}