{"product_id":"k-bond-color-pigment-kit-10-color-set-for-polyester-epoxy-stone-repairs-2-oz-bottles","title":"K-Bond Colour Pigment Kit — 10-colour set for polyester \u0026 epoxy stone repairs, 59 ml bottles","description":"\u003cp\u003e\u003cstrong\u003eK-Bond Colour Pigment Kit is a ten-colour set of concentrated pigments designed to tint polyester and epoxy adhesives for matching and repairing stone and countertop seams.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese pigments are formulated from high-grade raw materials to deliver consistent tinting, long shelf life, and easy blending with resin-based adhesives. The kit contains ten 2 oz. bottles in a range of commonly needed shades so you can mix a close match to granite, quartz, marble, or other stone surfaces when filling cracks, joining seams, or making colour-corrected repairs. Use them with polyester or epoxy systems to produce small-batch custom colours on-site without waiting for pre-mixed epoxy colours.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I create a colour match for a stone seam?\u003c\/h3\u003e\n\n\u003cp\u003eStart by comparing the stone to the available pigments and combine small amounts on a disposable palette until the hue, value, and undertone resemble the stone. Work in thin increments—add pigment gradually to a measured amount of adhesive to avoid over-saturating the mix.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTest ratios on scrap or samples before mixing repair quantity.\u003c\/li\u003e\n  \u003cli\u003eUse white and black to adjust lightness or darkness, and buff\/brown for warm undertones.\u003c\/li\u003e\n  \u003cli\u003eStir thoroughly to eliminate streaks and allow cure to reveal final colour.\u003c\/li\u003e\n  \u003cli\u003eMix small trial batches to confirm colour after curing and sanding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich adhesives are compatible with these pigments?\u003c\/h3\u003e\n\n\u003cp\u003eThe pigments were designed to blend with polyester adhesives and epoxy resins commonly used in stone fabrication and repair. They disperse into the liquid resin so the tint integrates throughout the cured material rather than sitting on the surface.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with polyester stone repair adhesives for seamless fills.\u003c\/li\u003e\n  \u003cli\u003eWorks with two-part epoxy systems for stronger structural joins.\u003c\/li\u003e\n  \u003cli\u003eNot intended for water-based glues or silicone sealants.\u003c\/li\u003e\n  \u003cli\u003eAdd pigments before accelerators or hardeners for even distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the kit contents and practical tips for working with them?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit includes ten 2-ounce bottles in a practical range of colours so you can create nuanced tones for natural stone. Each bottle is sized for convenience on job sites and for small-to-medium repair volumes without excessive waste.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes White, Red\/Brown, Black, Grey, Buff, Brown, Red, Yellow, Blue, and Green.\u003c\/li\u003e\n  \u003cli\u003eEach bottle holds 2 oz., suitable for multiple small repairs or several sample mixes.\u003c\/li\u003e\n  \u003cli\u003eKeep lids tightly closed and store cool and dry to preserve shelf life.\u003c\/li\u003e\n  \u003cli\u003eLabel mixed samples with ratios to replicate matches later.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I finish and blend a repaired area to look natural?\u003c\/h3\u003e\n\n\u003cp\u003eAfter the pigmented adhesive cures, sand and shape the repair to match the surrounding surface profile, then polish or seal as needed. Fine-tune colour by adding microscopic amounts of pigment to the surface layer or by glazing techniques rather than reworking the whole fill.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStart with coarse sanding for shape, finish with progressively finer grits.\u003c\/li\u003e\n  \u003cli\u003ePolish with appropriate pads or compounds for the stone type.\u003c\/li\u003e\n  \u003cli\u003eUse light-bodied pigmented glazes for subtle surface adjustments.\u003c\/li\u003e\n  \u003cli\u003eKeep samples of final mixes for future spot repairs or touch-ups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? K-Bond Colour Pigment Kit is aimed at stone fabricators, countertop installers, repair technicians, and DIYers who need on-site colour flexibility when working with polyester or epoxy adhesives. If you regularly repair granite, marble, quartz, or composite tops and want a portable, cost-effective way to mix custom tints and close colour gaps, this ten-colour set gives the range and bottle sizes suited to repeated minor repairs and matching tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these pigments be used in both epoxy and polyester adhesives?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The pigments are formulated to blend into polyester adhesives and two-part epoxy resins for stone repairs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many bottles are included and what sizes are they?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes ten bottles, each containing 2 ounces of concentrated colour pigment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"K-Bond","offers":[{"title":"Default Title","offer_id":55298981167441,"sku":"B0DK9RM1DB","price":126.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/k-bond-color-pigment-kit-front-packaging.jpg?v=1791970948","url":"https:\/\/craftiche.co.uk\/products\/k-bond-color-pigment-kit-10-color-set-for-polyester-epoxy-stone-repairs-2-oz-bottles","provider":"Craftiche","version":"1.0","type":"link"}