{"product_id":"arikit-glass-grinding-bits-3-4-inch-two-pack-regular-profile-for-tabletop-grinders","title":"Arikit glass grinding bits 3\/4-inch two-pack — regular profile for tabletop grinders","description":"\u003cp\u003e\u003cstrong\u003eThese are two 3\/4-inch Aanraku regular glass grinding bits sold as a pair, made to fit most tabletop glass grinders for shaping and smoothing stained glass and mosaic pieces.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you need consistent, easy-to-replace grinding tips for stained-glass work, the Aanraku 3\/4\" Twofers deliver simple compatibility and steady performance. Each package includes two regular-profile bits so you can swap a fresh bit in quickly or keep a spare on hand. They are designed for hobbyists and professionals who use tabletop glass grinders to refine edges, create curves, and size pieces precisely for lead came, copper foil, and mosaic layouts.\u003c\/p\u003e\n\n\u003ch3\u003eWill these bits fit my grinder?\u003c\/h3\u003e\n\n\u003cp\u003eThese Aanraku bits are 3\/4\" regular-profile bits made to match the common shaft and collet sizes on many residential and studio tabletop grinders. Confirm the 3\/4\" diameter match and the regular profile requirement with your grinder model before ordering. If your grinder uses a nonstandard shank or a different profile, you may need an adapter or a different bit size.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e3\/4-inch diameter regular profile — standard on many grinders\u003c\/li\u003e\n  \u003cli\u003eSold as a two-pack for quick replacement or backup\u003c\/li\u003e\n  \u003cli\u003eWorks with most tabletop grinders that accept 3\/4\" bits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tasks are these grinder bits best for?\u003c\/h3\u003e\n\n\u003cp\u003eThese bits are intended for edge shaping, smoothing cut lines, creating consistent curves, and removing small amounts of glass to fine-tune fit. The regular profile balances material removal and control, making it useful for trimming stained glass, refining mosaic tesserae, and adjusting pieces for copper-foil or lead seams. They’re not intended for aggressive stock removal on very thick or tempered glass.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEdge smoothing after cutting for cleaner solder joints\u003c\/li\u003e\n  \u003cli\u003eShaping curves and notches to match patterns precisely\u003c\/li\u003e\n  \u003cli\u003eFine adjustments for fitting glass into came or foil lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and care for Aanraku 3\/4\" bits?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward: remove the grinder’s collet cap, slide in the bit until it seats, then tighten the collet to secure it. Rinse the bit occasionally while running with water to flush glass grit away and maintain cutting action. Replace the bit when you notice reduced grinding efficiency or glazing from embedded particles; the twofer pack lets you swap in a fresh bit quickly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInstall by seating the shank in the collet and tightening the cap\u003c\/li\u003e\n  \u003cli\u003eRun the grinder with water to reduce heat and clear debris\u003c\/li\u003e\n  \u003cli\u003eSwap or replace when cutting power declines or glazing appears\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these bits handle different glass thicknesses?\u003c\/h3\u003e\n\n\u003cp\u003eThe Aanraku regular 3\/4\" bits are suited to common stained-glass thicknesses (typically 1.5–3 mm to moderate hobby thicknesses), trimming and shaping without aggressive stock removal. They perform best on standard sheet glass and usual stained-glass material rather than very thick or tempered glass, which requires specialized tooling. For heavy-duty grinding, consider larger or industrial-grade bits.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIdeal for standard stained-glass and mosaic thicknesses\u003c\/li\u003e\n  \u003cli\u003eNot recommended for tempered or very thick industrial glass\u003c\/li\u003e\n  \u003cli\u003eUse water to protect bit life and glass surface while grinding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you’re a stained-glass enthusiast, hobby mosaic artist, or a studio craftsperson using a tabletop grinder, these Aanraku Twofers (3\/4\" regular) offer a cost-effective, ready-to-install pair of replacement bits. They’re especially handy for users who value quick swaps, consistent profiles for pattern work, and compatibility with common grinder models. Avoid if you need nonstandard shank sizes or heavy-duty industrial grinding tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these bits fit all tabletop grinders?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit most grinders that accept 3\/4\" regular-profile bits. Check your grinder’s bit diameter and profile before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long do these grinder bits last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Lifespan varies with use; running with water and avoiding heavy tempered glass extends life. Replace when cutting slows or glazing forms.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Arikit","offers":[{"title":"Default Title","offer_id":55296707756369,"sku":"B003V07TIW","price":50.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/arikit-aanraku-3-4-inch-front-packaging.jpg?v=1791946534","url":"https:\/\/craftiche.co.uk\/products\/arikit-glass-grinding-bits-3-4-inch-two-pack-regular-profile-for-tabletop-grinders","provider":"Craftiche","version":"1.0","type":"link"}