{"product_id":"akona-concrete-form-release-spray-28-oz-visible-white-film-non-staining-mold-release","title":"Akona Concrete Form Release Spray 828 ml — Visible White Film, Non-Staining Mould Release","description":"\u003cp\u003e\u003cstrong\u003eAkona Concrete Form Release 28 oz is a ready-to-use spray release agent that lets concrete separate cleanly from moulds, forms, and tools without staining or buildup.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you cast concrete regularly — from decorative panels and sculptures to utility forms and tubes — controlling adhesion at the mould surface saves time and preserves mould life. Akona's spray formula goes on white so you can see coverage, dries to a non-staining finish, and eliminates the need for messy mixing or dilution. Its compatibility with plywood, fibreglass, aluminium, steel, urethane, and more makes it a versatile choice for contractors, artisans, and hobbyists working on single pours or repeated production runs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this release agent prevent concrete from sticking to moulds?\u003c\/h3\u003e\n\u003cp\u003eAkona's release creates a thin, uniform layer between the mould surface and the fresh concrete, reducing mechanical bond and easing separation once the concrete sets. The product applies as a visible white film for consistent coverage, then dries without leaving coloured residue on cast parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForms a lubricant barrier to reduce adhesion and shear at the mould interface\u003c\/li\u003e\n  \u003cli\u003eWhite application film shows coverage for reliable spraying or pouring\u003c\/li\u003e\n  \u003cli\u003eNon-staining dry finish prevents discoloration of decorative concrete\u003c\/li\u003e\n  \u003cli\u003eReduces surface tearing and minimizes finishing repairs after demolding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the spray simple to use on different mould materials?\u003c\/h3\u003e\n\u003cp\u003eYes — the product arrives ready to spray or pour with no dilution or shaking required. It adheres well to a wide range of mould surfaces so you can use the same release across projects that include wood, metals, and synthetic moulds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApply directly to plywood, fibreglass, aluminium, steel, urethane, and other common mould materials\u003c\/li\u003e\n  \u003cli\u003eSpray evenly from recommended distance or pour along key contact areas for hand-spread coverage\u003c\/li\u003e\n  \u003cli\u003eDesigned for single- and multiple-pour moulds to reduce cleaning frequency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill using Akona release agent extend the life of my moulds and tools?\u003c\/h3\u003e\n\u003cp\u003eRegular application of a proper form release reduces concrete buildup and mechanical wear, which lowers abrasion on mould surfaces and edges. That means fewer repairs, less aggressive cleaning methods, and extended usable life for expensive moulds and metal forms.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents concrete adhesion that causes surface pitting and edge damage\u003c\/li\u003e\n  \u003cli\u003eMakes cleanup quicker, reducing the need for harsh scrapers or grinders\u003c\/li\u003e\n  \u003cli\u003eHelps maintain precise dimensions and surface quality across production runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I apply and store the 28 oz spray for best results?\u003c\/h3\u003e\n\u003cp\u003eSpray an even, visible coat onto the mould surface prior to placing concrete; pour application works for small areas. Allow any initial solvent flash to dry so the film becomes non-staining before casting. Store in a cool, dry place away from heat and open flame, and keep can upright to preserve spray performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApply evenly; re-coat high-contact areas as needed between pours\u003c\/li\u003e\n  \u003cli\u003eLet solvent flash off to avoid trapping moisture against the concrete\u003c\/li\u003e\n  \u003cli\u003eStore at recommended temperatures and keep container sealed when not in use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Akona Concrete Form Release 28 oz is aimed at contractors, precast producers, concrete artisans, landscape and hardscape crews, and DIY makers who need a dependable, non-staining mould release that simplifies demolding and protects mould investment. If you cast decorative pieces, repeat pours, or use mixed-material moulds, this spray offers a visible, ready-to-use solution to improve throughput and preserve surface quality without complex preparation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this release on metal and wood moulds?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Akona works on plywood, aluminium, steel, fibreglass, urethane and many other common mould materials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to mix or dilute before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The 28 oz formula is ready to spray or pour straight from the container with no mixing required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Akona","offers":[{"title":"Default Title","offer_id":55294708154705,"sku":"B0B23728W9","price":57.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/akona-concrete-form-release-front-label.jpg?v=1791934552","url":"https:\/\/craftiche.co.uk\/products\/akona-concrete-form-release-spray-28-oz-visible-white-film-non-staining-mold-release","provider":"Craftiche","version":"1.0","type":"link"}