{"title":"Sulky","description":"\u003cp\u003eCraftiche stocks 22 Sulky products, including \u003ca href=\"\/collections\/embroidery-stabilisers\"\u003eembroidery stabilisers\u003c\/a\u003e (18). Prices run from £29.20 to £45.69, including VAT.\u003c\/p\u003e\u003cp\u003eCraftiche is an independent UK online retailer and is not affiliated with Sulky. Sizes, materials and specifications are shown on each product page.\u003c\/p\u003e","products":[{"product_id":"sulky-heat-away-film-brush-off-stabilizer-clear-7-7-8-x-9-yd-temporary-embroidery-stabilizer-for-delicate-stretch-fabrics","title":"Sulky Heat Away Film Brush-Off Stabiliser, Clear 7-7\/8\" x 8.2 m — Temporary Embroidery Stabiliser for Delicate \u0026 Stretch Fabrics","description":"\u003cp\u003e\u003cstrong\u003eSulky Heat Away Film Brush Off Stabiliser is a clear, temporary film that stabilises fabrics for machine embroidery and lace, then brushes or tears away cleanly without leaving sticky residue.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis clear, lightweight stabiliser is formulated for delicate and stretch fabrics where water-soluble options or wet removal would be impractical. It provides immediate support for computer-embroidered lace, cutwork, Battenberg and free-motion thread lace, plus 3-D thread appliqués, and works on most fabric types. Because it removes dry by brushing or tearing, it’s ideal when water or aggressive solvents could harm the fabric or when precision removal is required.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this stabiliser prevent puckering and fabric movement?\u003c\/h3\u003e\n\u003cp\u003eThe Sulky Heat Away Film creates a firm temporary surface that keeps knit and stretchy materials from shifting under the needle. It bonds to the fabric during stitching and holds fine threads and dense designs in place, reducing distortion during dense fills or cutwork.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstantly stabilises fabrics while stitching—no pinning required\u003c\/li\u003e\n  \u003cli\u003eReduces sliding, puckering and misalignment in detailed work\u003c\/li\u003e\n  \u003cli\u003eSupports dense embroidery areas and delicate threadwork\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do you remove it without damaging delicate fabrics?\u003c\/h3\u003e\n\u003cp\u003eAfter stitching, the excess film either brushes off or tears away cleanly, leaving the embroidered area intact. Because it’s designed to be removed dry, there’s no need for laundering or solvents, which protects fabrics that would be damaged by water or rubbing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrush away loose pieces with a soft brush or lint roller\u003c\/li\u003e\n  \u003cli\u003eTear larger sections away by hand along seams or edges\u003c\/li\u003e\n  \u003cli\u003eNo sticky residue left behind to attract lint or discolor fabric\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat projects and fabric types is it best suited for?\u003c\/h3\u003e\n\u003cp\u003eThis stabiliser excels with machine-embroidered lace, cutwork, Battenberg lace, free-motion thread lace, and dimensional thread appliqués. It’s also a strong choice for knits and stretchy fabrics where stabilisation is critical but washing or wet removal would distort fibres.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComputer-embroidered lace and cutwork—clean edges and detail retention\u003c\/li\u003e\n  \u003cli\u003eKnitwear and stretch fabrics needing temporary rigidity\u003c\/li\u003e\n  \u003cli\u003e3-D thread appliqués where precise removal matters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does it compare to water-soluble or tear-away stabilisers?\u003c\/h3\u003e\n\u003cp\u003eUnlike water-soluble stabilisers, Sulky Heat Away Film doesn’t require washing to remove, making it safer for fabrics that can’t get wet. Versus standard tear-away stabilisers, this film offers very clean removal and minimal residue, while still providing quick stabilisation for complex designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemoves dry—no laundering or dissolving needed\u003c\/li\u003e\n  \u003cli\u003eSuitable for delicate motifs that would stray during wet removal\u003c\/li\u003e\n  \u003cli\u003eCombines the support of tear-away with the clean finish of film products\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Sulky Heat Away Film Brush Off Stabiliser is made for machine embroiderers, lace makers, and sewists who work with delicate, stretchy, or water-sensitive fabrics and need a temporary, high-performance stabiliser. It’s suited to hobbyists and professionals creating fine lace, cutwork, or dimensional thread pieces who want quick application, secure stitching, and residue-free removal.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can Sulky Heat Away Film be used on knits?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It stabilises knits and stretchy fabrics instantly and prevents shifting during embroidery without damaging the fabric.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I remove the stabiliser after stitching?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Brush or tear away the excess film by hand; it comes off cleanly without sticky residue or washing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55249098441041,"sku":"B001EQVFQ2","price":30.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-heat-away-film-product-front.jpg?v=1791632505"},{"product_id":"sulky-cut-away-plus-midweight-stabilizer-7-2-3in-x-8yd-white-permanent-support-for-outerwear-and-knits","title":"Sulky Cut-Away Plus midweight stabiliser 7-2\/3in x 7.3 m, White — permanent support for outerwear and knits","description":"\u003cp\u003e\u003cstrong\u003eSulky Cut-Away Plus is a midweight, permanent cutaway stabiliser that provides long-lasting support for machine embroidery on outerwear and open-weave fabrics.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re stitching dense logos, delicate monograms, or layered appliqués, this Sulky cutaway stabiliser is built to keep stitches stable through heavy-density designs and repeated washing. The 7-2\/3 inch by 8 yard roll in clean white offers enough material for multiple hoop sizes and projects, and its midweight construction balances firmness with a comfortable drape so finished garments remain wearable and attractive.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Sulky Cut-Away Plus help with dense or detailed embroidery?\u003c\/h3\u003e\n\u003cp\u003eThis midweight backing prevents puckering and distortion when your design has high stitch counts or close satin stitches. It holds its structure during stitching and remains supportive after trimming, preserving stitch definition on both the front and back of the fabric.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePermanent cutaway material resists breakdown under dense stitching.\u003c\/li\u003e\n  \u003cli\u003eMidweight density supports high-detail fills and satin edges.\u003c\/li\u003e\n  \u003cli\u003eReduces pull-through on satin stitches for cleaner outlines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use it on jackets, sweaters, and other outerwear?\u003c\/h3\u003e\n\u003cp\u003eYes — Sulky Cut-Away Plus is formulated for outerwear and heavier garments that go through wear and wash cycles. It stays in place inside garments, giving long-term stability so embroidery won’t sag or distort after laundering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePermanent support that remains after multiple washes.\u003c\/li\u003e\n  \u003cli\u003eDesigned to work well on knit or loosely woven outer fabrics.\u003c\/li\u003e\n  \u003cli\u003eIdeal for embroidered patches, logos, and names on jackets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hooping and cutting approach works best with this roll format?\u003c\/h3\u003e\n\u003cp\u003eThe generous 7-2\/3\" x 8 yd roll lets you cut pieces sized exactly to your hoop and design, minimizing waste. Use proper hooping to secure both stabiliser and fabric, then trim away excess stabiliser after stitching if needed — leaving the stabiliser’s cutaway portion for lasting support.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut pieces to match hoop dimensions for neat placement.\u003c\/li\u003e\n  \u003cli\u003eHoop fabric and stabiliser together for stable stitching.\u003c\/li\u003e\n  \u003cli\u003eTrim excess away around design while leaving supportive material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fabrics and design types pair best with this stabiliser?\u003c\/h3\u003e\n\u003cp\u003eSulky Cut-Away Plus is especially helpful with open-weave and knit fabrics that need firm backing, and with designs that use heavy fills or dense outlines. It’s a go-to choice when you want crisp edges and consistent stitch appearance over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOpen-weave and loosely woven fabrics like linen or mesh.\u003c\/li\u003e\n  \u003cli\u003eKnit garments such as sweatshirts and sweaters.\u003c\/li\u003e\n  \u003cli\u003eDense logos, monograms, and multi-layer appliqués.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Sulky Of America 275-08 Cut-Away Plus suits home embroiderers, small-business decorators, and professional stitchers who need a dependable, permanent midweight stabiliser for outerwear and complex designs. If you regularly embroider on jackets, sweatshirts, or open-weave fabrics and want finished work that holds up to wear and laundering, this roll gives the consistent backing you need.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Sulky Cut-Away Plus washable after embroidery?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This permanent cutaway stabiliser is designed to remain supportive through repeated washing without breaking down.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use it on knit garments like sweatshirts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s formulated for outerwear and knits, giving firm, lasting support for dense designs on sweatshirts and jackets.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55249112662353,"sku":"B0018N97UM","price":29.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-cutaway-plus-roll-front-view.jpg?v=1791632728"},{"product_id":"sulky-2mm-puffy-foam-sheets-for-embroidery-12-color-assortment-6x9-thin-washable-eva-for-raised-appliques","title":"Sulky 2mm Puffy Foam Sheets for Embroidery, 12-Colour Assortment (6\"x9\") — Thin, Washable EVA for Raised Appliqués","description":"\u003cp\u003e\u003cstrong\u003eSulky of America 12 Colour 2mm Puffy Foam Assortment (6\" x 9\") is thin, washable EVA foam sheets made for home embroidery machines to add raised dimension and durable texture to projects.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you want to give appliqués, wearable gear, or headwear a lightweight raised effect that stitches cleanly under a satin edge, these 2mm puffy foam sheets are formulated for that use. Made from Ethylene Vinyl Acetate (EVA), the sheets are non-toxic and water-resistant so they can be machine washed after stitching; they are not suitable for dry-cleaning and are flammable, so follow care and safety guidelines. The 6\" x 9\" sheets come in an assortment of 12 colours to help coordinate with threads, stabilisers, and fabric choices while minimizing waste—small offcuts remain usable for detail work.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these foam sheets perform in machine embroidery?\u003c\/h3\u003e\n\u003cp\u003eThe thin 2mm thickness is optimised to compress under embroidery needles and recover afterward, creating a defined raised effect when used with satin stitch borders. They hold shape during stitching but are soft enough to avoid damaging hoops or needles when used correctly. For best results, pair with a stabiliser recommended for foam appliqué and use embroidery designs that include satin edges or heavy outlines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for use on home embroidery machines and compatible with computerized embroidery cards.\u003c\/li\u003e\n  \u003cli\u003eWorks best with designs that use satin stitch edges to lock the foam in place.\u003c\/li\u003e\n  \u003cli\u003eThin 2mm profile balances lift with easy stitching and little needle strain.\u003c\/li\u003e\n  \u003cli\u003eMachine washable after embroidery; not suitable for dry-cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat projects benefit most from Sulky 2mm puffy foam?\u003c\/h3\u003e\n\u003cp\u003eThese sheets are commonly used in headgear, patches, and washable wearables where lightweight raised detail is desired. They add tactile interest to appliqués on hats, jackets, kids’ garments, and fabric accessories without adding bulk. The assortment of 12 colours lets you blend or contrast with fabric and thread choices for logos, characters, and decorative accents.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeadwear: caps and beanies that need structured raised embroidery.\u003c\/li\u003e\n  \u003cli\u003eWearables: jackets, sweatshirts, and kid’s clothing that will be laundered.\u003c\/li\u003e\n  \u003cli\u003eAppliqué and patches: logos and badges with crisp satin edges.\u003c\/li\u003e\n  \u003cli\u003eSmall craft elements: usable scraps for fine detailing and multi-layer effects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I stitch and care for finished pieces using these foam sheets?\u003c\/h3\u003e\n\u003cp\u003ePlace the foam between fabric and stabiliser, stitch your design (preferably with satin borders), then trim away excess foam if needed. After embroidery, pieces can be laundered on gentle cycles because the foam is water-resistant; avoid bleach and dry-cleaning and keep finished items away from open flames or high heat sources. Follow your embroidery machine’s needle and thread recommendations for best tension and stitch quality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a stabiliser suited to foam appliqué and a satin edge design for secure placement.\u003c\/li\u003e\n  \u003cli\u003eTrim excess foam close to stitching for clean edges without cutting stitches.\u003c\/li\u003e\n  \u003cli\u003eMachine wash gentle; do not dry-clean; keep away from high heat\/flame.\u003c\/li\u003e\n  \u003cli\u003eTest stitch on scrap first to set tension and verify needle compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Sewers and embroiderers who want a reliable, low-profile puffy effect for home-machine projects will appreciate this Sulky 2mm foam assortment. It’s ideal for hobbyists and small-business makers creating embroidered headwear, washable garments, appliqués, and patches who need a range of colours, minimal waste, and material formulated specifically for machine embroidery. If you need thicker loft, look for other foam thicknesses; if you want a thin, consistent lift that stitches cleanly and survives gentle laundering, these 6\" x 9\" sheets are a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I machine wash items with Sulky puffy foam?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these EVA foam sheets are water-resistant and can be machine washed on gentle cycles, but do not dry-clean and avoid high-heat drying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this foam safe for home embroidery machines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—2mm thickness is made for home embroidery machines and works best with satin-stitch edges and proper stabiliser.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55251172426065,"sku":"B001HVVYHE","price":30.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-front-packaging-6x9-2mm-12color.jpg?v=1791642229"},{"product_id":"sulky-stick-n-stitch-printable-stabilizer-sheets-12-pack-8-5x11-white-printable-water-soluble-guide","title":"Sulky Stick 'n Stitch Printable Stabiliser Sheets 12-Pack 8.5x11 White — Printable, Water-Soluble Guide","description":"\u003cp\u003e\u003cstrong\u003eSulky Stick 'n Stitch printable sheets are printable, water-soluble stabiliser sheets that adhere to fabric so you can print, stitch, then wash away the guide.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you hand-embroider, cross-stitch, punch-needle, or quilt, these printable sheets let you transfer any design from a printer or copier directly to your fabric with minimal fuss. Each package contains twelve 8.52211-inch white sheets that work in laser, inkjet, and bubble-jet printers (use the lightest draft setting). After printing, peel off the backing, stick the sheet onto your fabric, stitch through the printed overlay, and rinse the residue away when your project is finished. The result: crisp, removable stitch guides without tracing, carbon paper, or fragile transfer methods.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I transfer a printed design onto fabric with Sulky Stick 'n Stitch?\u003c\/h3\u003e\n\u003cp\u003ePrint your artwork or pattern directly onto a Stick 'n Stitch sheet using a copier or your home printer. Use the lightest (draft) print setting to avoid oversaturation. Trim the printed sheet if needed, remove the backing, press it onto the fabric, and start stitching through the printed lines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with laser, inkjet, and bubble-jet printers.\u003c\/li\u003e\n  \u003cli\u003eUse draft\/low-ink setting to keep lines clean and removable.\u003c\/li\u003e\n  \u003cli\u003ePeel backing, adhere sheet to fabric, and stitch through printed guide.\u003c\/li\u003e\n  \u003cli\u003eRinse away residue when stitching is complete for a clean finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill Stick 'n Stitch work with my embroidery, cross-stitch, or punch-needle projects?\u003c\/h3\u003e\n\u003cp\u003eYes — Stick 'n Stitch is designed for multiple needlecrafts including hand embroidery, counted cross-stitch, punch needle, and quilting. The sheet stays in place while you stitch, preventing pattern shifts and making complex motifs easier to follow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStable adhesion that holds pattern in position while stitching.\u003c\/li\u003e\n  \u003cli\u003eThin enough to stitch through comfortably with hand needles and punches.\u003c\/li\u003e\n  \u003cli\u003eRinses away cleanly so finished fabric feels natural and soft.\u003c\/li\u003e\n  \u003cli\u003eWorks well on a variety of fibres: cotton, linen, blends, and more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I remove the sheet after stitching and what care is needed?\u003c\/h3\u003e\n\u003cp\u003eAfter finishing your stitches, gently rinse the fabric in cool water to dissolve and remove the Stick 'n Stitch film. Allow the piece to air dry flat, and press if required; normal project care depends on your thread and fabric choices. No harsh scrubbing is necessary — mild rinsing removes the soluble film without harming stitches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRinse in cool or lukewarm water to dissolve the sheet film.\u003c\/li\u003e\n  \u003cli\u003eGently blot and lay flat to dry to preserve stitched tension.\u003c\/li\u003e\n  \u003cli\u003eMachine washability depends on the fabric and thread used; test if unsure.\u003c\/li\u003e\n  \u003cli\u003eAvoid bleaches or strong solvents that could affect colours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size and quantity are in the package, and what printers are compatible?\u003c\/h3\u003e\n\u003cp\u003eThis pack includes twelve white sheets sized 8.52211 inches, a convenient size for standard home printing and typical embroidery motifs. Stick 'n Stitch is compatible with most home and office printers as well as photocopiers. Always check your printer manual for handling thick media if your model is sensitive to non-standard paper types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12 sheets per package, each 8.52211 inches.\u003c\/li\u003e\n  \u003cli\u003eUse with inkjet, laser, bubble-jet printers and copiers.\u003c\/li\u003e\n  \u003cli\u003eSet printer to the lightest\/draft mode for best removability.\u003c\/li\u003e\n  \u003cli\u003eTrim sheets to fit small designs or to avoid printer jams.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Crafters who want a fast, tidy way to transfer detailed patterns onto fabric will appreciate Sulky Stick 'n Stitch. It suits hobby embroiderers, quilters marking motifs, cross-stitchers working counted designs, and punch-needle artists who need stable placement. Its also handy for teachers, small-batch makers, and anyone who prefers printing designs at home rather than tracing or using complex transfer methods. If you value accurate alignment, simple printing, and a wash-away finish, these printable sheets streamline the transfer step so you can focus on stitching.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Stick 'n Stitch with an inkjet printer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Use your inkjet on the lightest draft setting for clean, removable prints.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I remove the sheet after stitching?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Gently rinse the stitched fabric in cool water; the soluble film will wash away.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55252039074129,"sku":"B01M7NQD9F","price":29.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-stick-n-stitch-front-package.jpg?v=1791647065"},{"product_id":"sulky-sticky-fabri-solvy-stabilizer-8-5x11-12-pack-self-adhesive-water-soluble-sheets-for-embroidery","title":"Sulky Sticky Fabri-Solvy Stabiliser 8.5x11 12-Pack — Self-Adhesive, Water-Soluble Sheets for Embroidery","description":"\u003cstrong\u003eSulky Sticky Fabri-Solvy is a self-adhesive, water-soluble stabiliser sheet that you print or draw on, stick to fabric, stitch through, and then wash away for a clean finish.\u003c\/strong\u003e\n\n\u003cp\u003eIf you embroider, appliqué, needle-punch, or quilt, Sticky Fabri-Solvy saves time and improves accuracy by holding your design exactly where you want it without adding paper fibres to the project. Each 8.5\" x 11\" sheet has a peel-off release backing so you can position the stabiliser on virtually any fabric, stitch directly through the stabiliser and fabric, then rinse it away cleanly. This 12-pack is sized to work with home printers, photocopiers, and hand-drawn patterns so you can transfer designs quickly and reliably.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I transfer my design onto Sulky Sticky Fabri-Solvy?\u003c\/h3\u003e\n\u003cp\u003eTransfer is flexible: use a laser or inkjet printer, photocopier, or trace by hand. The stabiliser accepts ink and pencil markings clearly, so detailed patterns and lettering reproduce accurately when you stitch.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrint directly from your computer on 8.5\" x 11\" sheets.\u003c\/li\u003e\n\u003cli\u003ePhotocopy or trace images with a lightbox or window.\u003c\/li\u003e\n\u003cli\u003eUse a fine pen, permanent marker, or pencil for durable lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this stabiliser stay in place while I stitch?\u003c\/h3\u003e\n\u003cp\u003eThe adhesive backing holds the stabiliser to fabric fibres without leaving residue on most textiles. It keeps small or intricate pieces from shifting for hand embroidery, machine work, and appliqué placement.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePeel-off release sheet exposes a repositionable adhesive layer.\u003c\/li\u003e\n\u003cli\u003eAdhesive grips cotton, linen, felt, and many blended fabrics.\u003c\/li\u003e\n\u003cli\u003eCan be repositioned briefly before stitching for precise alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Sticky Fabri-Solvy wash out from my finished piece?\u003c\/h3\u003e\n\u003cp\u003eAfter stitching, the stabiliser dissolves in cool water without paper fibres, leaving only your thread and fabric behind. It rinses quickly and fully, which is ideal for delicate fabrics and projects that need a clean, professional look.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo paper component means a clear washout every time.\u003c\/li\u003e\n\u003cli\u003eSoak or rinse in cool water until the stabiliser disappears.\u003c\/li\u003e\n\u003cli\u003eGentle agitation helps remove residue from dense stitching areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use Sticky Fabri-Solvy for multiple techniques and fabric types?\u003c\/h3\u003e\n\u003cp\u003eYes — it’s designed for hand embroidery, machine embroidery, appliqué, needle-punch, and quilting. The adhesive works on a range of common fabrics and the soluble base protects texture during needlework.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for woven, knitted, and non-woven fabrics.\u003c\/li\u003e\n\u003cli\u003eWorks well for appliqué pieces and small motif placement.\u003c\/li\u003e\n\u003cli\u003eHand and machine stitching both pass cleanly through the stabiliser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Sulky Sticky Fabri-Solvy is aimed at hobbyists and professional stitchers who want precise placement and a tidy washout without dealing with paper-backed stabilisers. If you make embroidered gifts, detailed appliqués, or mixed-media textile art and want to avoid ghosting or residue after stitching, these 8.5\" x 11\" self-adhesive sheets are a practical addition to your supplies.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I print designs on Sticky Fabri-Solvy with my home printer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. 8.5x11 sheets work with most inkjet and laser printers, as well as photocopiers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the adhesive leave residue on delicate fabrics?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The repositionable adhesive typically peels cleanly and washes away without leaving residue.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55252322025809,"sku":"B004R2B3NU","price":29.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-sticky-fabri-solvy-front-packaging.jpg?v=1791650535"},{"product_id":"sulky-stick-n-stitch-printable-self-adhesive-wash-away-stabilizer-12-sheets-8-5x11-inkjet-safe-and-dissolvable","title":"Sulky Stick N Stitch printable self-adhesive wash-away stabiliser, 12 sheets 8.5x11, inkjet-safe and dissolvable","description":"\u003cp\u003e\u003cstrong\u003eSulky Stick N Stitch is a printable, pressure-sensitive, water-soluble stabiliser that temporarily adheres like fabric to transfer designs and then rinses completely away.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you embroider, punch-needle, cross stitch or quilt, this self-adhesive wash-away sheet makes it simple to apply a printed pattern or to stabilise delicate fabrics without pins or basting. Each pack contains twelve 8-1\/2 x 11\" sheets that accept inkjet printing and hold in place during stitching, then dissolve cleanly in water—leaving both sides of reversible projects free of residue. Sulky's stabilisers are acid- and lead-free and designed to behave like fabric while you work.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use Stick N Stitch to transfer a printed pattern?\u003c\/h3\u003e\n\n\u003cp\u003ePrint your pattern directly onto the Stick N Stitch sheet using an inkjet printer, peel the backing, and smooth the adhesive side onto your fabric. The sheet behaves like fabric so you can stitch through it without shifting, and once your work is complete, rinse it away.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePrint pattern on the printable side with an inkjet printer.\u003c\/li\u003e\n  \u003cli\u003ePeel paper backing; align and press onto fabric to adhere.\u003c\/li\u003e\n  \u003cli\u003eEmbroider, cross stitch, or needle through the sheet as if it were fabric.\u003c\/li\u003e\n  \u003cli\u003eRinse in water to dissolve stabiliser and reveal clean fabric.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill Stick N Stitch work with different needlecraft techniques?\u003c\/h3\u003e\n\n\u003cp\u003eYes—its fabric-like texture and pressure-sensitive adhesive make it suitable for hand embroidery, punch needle, cross stitch, quilting and more. It supports stitches without puckering and can also serve as a temporary topper or backing when needed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHand embroidery and surface stitching hold shape during work.\u003c\/li\u003e\n  \u003cli\u003ePunch needle projects benefit from a stable, printable surface.\u003c\/li\u003e\n  \u003cli\u003eQuilting patterns can be printed and placed for accurate placement.\u003c\/li\u003e\n  \u003cli\u003eUse as topper\/backing for designs that need temporary support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I remove the stabiliser and what should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eAfter finishing your stitches, soak or rinse the piece in warm water to dissolve the stabiliser; no film or residue remains, making it ideal for reversible items. Allow to air-dry and press if needed for a finished look.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSoak in warm water until the sheet dissolves away.\u003c\/li\u003e\n  \u003cli\u003eGently squeeze excess water; avoid vigorous wringing.\u003c\/li\u003e\n  \u003cli\u003eLay flat to dry and press lightly if necessary for smoothness.\u003c\/li\u003e\n  \u003cli\u003ePerfect for reversible projects—no stabiliser on either side when rinsed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I make a liquid brush-on stabiliser from Stick N Stitch?\u003c\/h3\u003e\n\n\u003cp\u003eYes. You can dissolve sheets to create a homemade liquid brush-on stabiliser as a cost-saving alternative to prepared bottles. Follow safe, tested methods and allow the solution to set into the fabric where extra support is needed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDissolve small pieces in warm water to form a gel-like solution.\u003c\/li\u003e\n  \u003cli\u003eBrush onto fabric areas that need temporary reinforcement.\u003c\/li\u003e\n  \u003cli\u003eTest on scrap fabric first to confirm strength and appearance.\u003c\/li\u003e\n  \u003cli\u003eRinse away when you no longer need the temporary support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Sulky Stick N Stitch is ideal for crafters who print patterns at home and want a temporary, fabric-like stabiliser that adheres securely during stitching and rinses away completely. It suits hand embroiderers, punch-needle artists, cross-stitchers, quilters, and anyone making reversible projects or who prefers to avoid pins, basting, or permanent backing materials.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I print designs on Stick N Stitch with an inkjet printer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Stick N Stitch sheets accept inkjet printing—print your pattern, peel the backing, and adhere to fabric before stitching.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the stabiliser leave residue after rinsing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The wash-away formula dissolves in water and leaves no stabiliser on either side of reversible projects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55252577517905,"sku":"B07V3SZ43Y","price":29.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-stick-n-stitch-front-packaging.jpg?v=1791652194"},{"product_id":"sulky-12-color-3mm-puffy-foam-sheets-for-embroidery-6-x-9-in-iron-on-machine-washable","title":"Sulky 12-Colour 3mm Puffy Foam Sheets for Embroidery, 6 x 9 in – Iron-On, Machine Washable","description":"\u003cstrong\u003eSulky Of America 12 Colour 3mm Puffy Foam Assortment is a thin, iron-on EVA foam sheet set designed to add raised, cushioned dimension under machine embroidery without compromising fabric drape.\u003c\/strong\u003e\n\n\u003cp\u003eThese 6\" x 9\" sheets are made from a lightweight ethylene-vinyl acetate (EVA) material formulated for home sewing machines. Each sheet is 3mm thick and comes in a 12-colour assortment that adheres with heat to provide a soft, durable spacer under dense stitches. The foam is water-resistant, non-toxic, and washable by machine, making it suitable for decorative projects that may need laundering; be aware it is flammable and should not be dry-cleaned.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this puffy foam create raised embroidery effects?\u003c\/h3\u003e\n\u003cp\u003eThe foam acts as a low-profile cushion between your fabric and the embroidery stitches. When stitched over, it compresses and remains beneath the needlework, producing a pronounced, puffy look without the bulk of traditional padding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThin 3mm thickness preserves garment drape while delivering dimension\u003c\/li\u003e\n  \u003cli\u003eIron-on backing secures foam prior to stitching for precise placement\u003c\/li\u003e\n  \u003cli\u003eResponds well to dense fills and satin stitches for crisp outlines\u003c\/li\u003e\n  \u003cli\u003eMinimal trimming waste—small offcuts remain usable for details\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill Sulky puffy foam work with my home embroidery machine?\u003c\/h3\u003e\n\u003cp\u003eYes; the foam is engineered for home machine use and tolerates common embroidery needle penetration without shredding or distorting the design. For best results, match needle size and stitch density to fabric and foam thickness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for domestic embroidery machines\u003c\/li\u003e\n  \u003cli\u003eResists shredding under heavy needle penetration when used correctly\u003c\/li\u003e\n  \u003cli\u003eUse stabiliser underneath as recommended for delicate fabrics\u003c\/li\u003e\n  \u003cli\u003eTest stitch settings on a scrap before final hooping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply and care for these foam sheets?\u003c\/h3\u003e\n\u003cp\u003eCut the foam to shape, position with the iron-on side down, and press briefly with heat to tack it in place. Stitch your design, then launder as needed—machine washing is allowed, but avoid dry cleaning and keep away from open flame.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrim to fit the embroidered area; even small pieces are usable\u003c\/li\u003e\n  \u003cli\u003eIron-on adhesion holds the foam while you embroider\u003c\/li\u003e\n  \u003cli\u003eMachine washable; do not dry-clean and keep away from flames\u003c\/li\u003e\n  \u003cli\u003eAllow for test washes to confirm compatibility with your fabric and threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat project types benefit most from this foam?\u003c\/h3\u003e\n\u003cp\u003ePuffy foam is ideal when you want raised motifs on apparel, accessories, or home décor without adding excessive stiffness. It provides soft elevation suitable for logos, mascots, cartoon motifs, and decorative lettering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT-shirts, sweatshirts, and outerwear where flexibility matters\u003c\/li\u003e\n  \u003cli\u003eHats, patches, and appliqué accents needing dimensional lift\u003c\/li\u003e\n  \u003cli\u003eChildren’s items that require non-toxic, washable materials\u003c\/li\u003e\n  \u003cli\u003eSample swatches for digitizing tests and stitch density adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Sewists and machine embroiderers who want a clean, consistent raised appearance without heavy bulk will appreciate the Sulky 3mm puffy foam assortment. It suits hobbyists and small-business crafters producing garments, accessories, and embroidered gifts, especially when washability and minimal waste are priorities.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Sulky puffy foam machine washable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the foam is water-resistant and safe for machine washing, but avoid dry cleaning and exposure to open flames.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this foam with a home embroidery machine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it's formulated for domestic embroidery machines; test stitch settings on a scrap piece first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55253368373585,"sku":"B0018NBD2M","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-puffy-foam-front-packaging.jpg?v=1791658081"},{"product_id":"sulky-tear-easy-stabilizer-8-x-11-yd-roll-white-tear-away-backing-for-machine-applique-lightweight-and-non-abrasive","title":"Sulky Tear-Easy Stabiliser 8\" x 10.1 m roll — white tear-away backing for machine appliqué, lightweight and non-abrasive","description":"\u003cp\u003e\u003cstrong\u003eSulky Tear-Easy Stabiliser is a soft, lightweight tear-away backing that stabilises fabric for sewing machine appliqué and lifts away cleanly without distorting stitches.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for precision sewing projects, this Sulky stabiliser arrives as an 8-inch-wide roll with 11 yards of white tear-away material imported from Italy. It provides firm support under stitches yet removes without pulling or stretching the embroidery, making it a go-to option for quilters, garment makers, and anyone who wants crisp applique edges. Tailor the amount of support by using one, two, or three layers depending on fabric weight and stitch density.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Sulky Tear-Easy help make machine appliqué neater?\u003c\/h3\u003e\n\n\u003cp\u003eThe stabiliser holds the fabric steady while your machine stitches the applique, reducing puckering and distorted stitches around curves and dense designs. Because it tears away cleanly, the finished edge remains smooth and true to the intended shape.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents fabric movement under stitching for sharper applique outlines\u003c\/li\u003e\n  \u003cli\u003eRemoves without stretching stitches or leaving rough edges\u003c\/li\u003e\n  \u003cli\u003eWhite colour blends under most light fabrics to keep appliqué colours consistent\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow many layers should I use for different fabrics and stitch densities?\u003c\/h3\u003e\n\n\u003cp\u003eChoose one layer for lightweight cottons and simple satin stitches; add a second or third layer for knits, loosely woven fabrics, or very dense embroidery. Layers tear away individually, so you can peel back excess stabiliser without disturbing the stitchwork beneath.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne layer: light to medium cottons, basic designs\u003c\/li\u003e\n  \u003cli\u003eTwo layers: medium-weight fabrics, moderate stitch density\u003c\/li\u003e\n  \u003cli\u003eThree layers: bulky knits, heavy fabrics, or very dense fills\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the stabiliser damage delicate fabrics or leave residue?\u003c\/h3\u003e\n\n\u003cp\u003eSulky Tear-Easy is formulated to be soft and non-abrasive so it won’t fray or pull delicate fabrics during stitching or removal. There is no adhesive residue because it’s a tear-away product rather than a sticky backing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSoft texture reduces abrasion on fine materials\u003c\/li\u003e\n  \u003cli\u003eTear-away removal avoids sticky residue\u003c\/li\u003e\n  \u003cli\u003eLayers can be removed gradually to protect fragile seams\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the roll size and origin details I should know?\u003c\/h3\u003e\n\n\u003cp\u003eThe product comes as an 8-inch (20.3 cm) wide roll with 11 yards (10.1 m) of white stabiliser—ample length for multiple projects. Sulky Tear-Easy is manufactured in Italy and packaged for ease of use in home and professional sewing environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDimensions: 8 inches wide, 11 yards per roll\u003c\/li\u003e\n  \u003cli\u003eColour: white to sit discreetly under light fabrics\u003c\/li\u003e\n  \u003cli\u003eImported from Italy and packaged for retail use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Sewists, embroiderers, and apparel makers who want a reliable, easy-to-remove backing for machine appliqué and embroidery. Whether you’re crafting quilts, children’s clothing, decorative patches, or home décor, this Sulky stabiliser offers controlled support and tidy removal without distorting stitches—especially useful when you need accurate, clean edges and minimal finishing time.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Sulky Tear-Easy suitable for knits?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — use two or three layers for knits to prevent stretch and stabilise dense stitching.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it leave adhesive residue on fabric?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — it’s a tear-away stabiliser without adhesive, so it removes cleanly without residue.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55253472149841,"sku":"B0018N44N2","price":31.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-tear-easy-front-packaging.jpg?v=1791659302"},{"product_id":"sulky-soft-sheer-cut-away-permanent-stabilizer-roll-12-x-11-yd-ultra-soft-nylon-for-delicate-knits-lightweight-fabrics","title":"Sulky Soft \u0026 Sheer Cut-Away Permanent Stabiliser Roll — 12\" x 10.1 m, Ultra-Soft Nylon for Delicate Knits \u0026 Lightweight Fabrics","description":"\u003cp\u003e\u003cstrong\u003eSulky Soft \u0026amp; Sheer Cut-Away is a lightweight, permanent stabiliser roll that supports embroidery on delicate knits and lightweight woven fabrics without adding bulk.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you work with t-shirt knits, organza, lightweight rayon or other delicate materials, you need a stabiliser that anchors dense stitches yet stays soft against the skin. This non-woven nylon cut-away roll gives long-term stitch stability, resists stretch and prevents puckering during sewing and laundering. The product ships as an 11-yard roll at 12 inches wide in acid-free white and is manufactured in the USA.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Sulky Soft \u0026amp; Sheer prevent puckering and distortion?\u003c\/h3\u003e\n\u003cp\u003eThe stabiliser's textured, non-woven nylon structure resists stretch and disperses tension from embroidery stitches. Because it remains with the fabric after trimming, it continues to support the stitched area through repeated washings and wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePermanent cut-away finish secures dense designs on thin fabrics\u003c\/li\u003e\n  \u003cli\u003eStretch resistance minimizes pulling during stitching\u003c\/li\u003e\n  \u003cli\u003eTextured surface helps stitches bite without sinking into fabric\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this on skin-contact garments and delicate textiles?\u003c\/h3\u003e\n\u003cp\u003eYes — Sulky Soft \u0026amp; Sheer is ultra soft next to the skin and thin enough for use on garments that will be worn, including tees and athletic wear. It’s also suitable for sheer textiles like organza and lightweight synthetics where bulk would spoil the look.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUltra-soft nylon construction for comfort on shirts and baby items\u003c\/li\u003e\n  \u003cli\u003eThin profile maintains drape on lightweight fabrics\u003c\/li\u003e\n  \u003cli\u003eSafe for synthetic blends, lycra, and delicate trims\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat embroidery techniques or projects benefit most from this stabiliser?\u003c\/h3\u003e\n\u003cp\u003eSulky Soft \u0026amp; Sheer is ideal for dense fills, free-form and trapunto-style embroidery where permanent support is needed. It prevents sagging or stretching around tight stitches, so designs stay crisp and even on flexible materials.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDense fills and lettering on t-shirts and jerseys\u003c\/li\u003e\n  \u003cli\u003eFree-form machine embroidery and decorative stitching\u003c\/li\u003e\n  \u003cli\u003eTrapunto and raised-effect stitching where backing must remain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply and trim the cut-away stabiliser for best results?\u003c\/h3\u003e\n\u003cp\u003eHoop fabric with the stabiliser under the garment or attach it temporarily with spray or pins, then stitch as usual. After finishing, trim the stabiliser close to the embroidery perimeter, leaving a small amount in stretchy areas to ensure ongoing support.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHoop under or baste to the fabric for stable stitching\u003c\/li\u003e\n  \u003cli\u003eTrim excess stabiliser, leaving cut-away backing where fabric stretches\u003c\/li\u003e\n  \u003cli\u003eLaunder as normal; stabiliser remains to maintain shape\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Sulky Soft \u0026amp; Sheer Cut-Away is aimed at home embroiderers, small-scale apparel decorators, and textile artists who need reliable, low-bulk stabilisation for lightweight and stretchy fabrics. If you create dense embroidered designs on t-shirts, athletic wear, lingerie, sheers or delicate synthetics and want stitches that stay smooth through washing and wearing, this soft, permanent cut-away roll is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Sulky Soft \u0026amp; Sheer suitable for washable garments?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It remains with the fabric after laundering, preserving stitch shape and preventing sagging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use it on stretch fabrics like lycra?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Its excellent stretch resistance supports embroidery on lycra and other knit fabrics without distorting designs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55253596504401,"sku":"B003W0PGZO","price":31.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-soft-sheer-cut-away-roll.jpg?v=1791661178"},{"product_id":"sulky-solvy-water-soluble-embroidery-stabilizer-roll-7-875-x-9-yd-translucent-dissolvable-template","title":"Sulky Solvy Water-Soluble Embroidery Stabiliser Roll, 7.875\" x 8.2 m — Translucent, Dissolvable Template","description":"\u003cstrong\u003eSulky Solvy is a transparent, water-soluble stabiliser roll designed to support embroidery and act as a removable template without leaving residue on your fabric.\u003c\/strong\u003e\n\nSulky Solvy comes as a translucent roll that gives temporary structure for stitching, tracing, and pattern placement. Because it dissolves in water, it supports delicate threads and fabrics through sewing or machine embroidery, then disappears cleanly so only your stitches remain. The roll format is handy for larger projects or multiple designs and stores easily in its reusable clamshell to stay fresh for future use.\n\n\u003ch3\u003eHow will Solvy help my machine embroidery or hand stitching?\u003c\/h3\u003e\n\u003cp\u003eSolvy provides a stable surface for precise stitching on fabrics that might otherwise stretch, pucker, or slip. It holds embroidery threads in place and preserves stitch detail until you wash it away, helping to achieve crisp, professional-looking results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates a smooth, supportive layer for dense or delicate stitches\u003c\/li\u003e\n  \u003cli\u003ePrevents fabric distortion and thread sinking on knits and loosely woven textiles\u003c\/li\u003e\n  \u003cli\u003eRemoves completely with water — no residue left on top or bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use the roll as a design template or pattern guide?\u003c\/h3\u003e\n\u003cp\u003eYes — the semi-transparent surface makes it ideal for printing, tracing, or drawing your design directly onto the stabiliser. Once the design is stitched, you rinse away the stabiliser and reveal a clean, unobstructed design on your fabric.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrint or trace patterns directly onto the material for exact placement\u003c\/li\u003e\n  \u003cli\u003eStick lightly to fabric to keep templates aligned while stitching\u003c\/li\u003e\n  \u003cli\u003ePerfect for layered or multi-part designs where accuracy is critical\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the product dimensions and storage features?\u003c\/h3\u003e\n\u003cp\u003eThis package contains one roll measuring 7.875 inches wide by nine yards long, offering plenty of stabiliser for multiple projects or wider designs. The stabiliser is packaged in a reusable clamshell container to protect the roll from dust, humidity, and curling between uses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRoll width: 7.875 inches — fits many hoops and workspaces\u003c\/li\u003e\n  \u003cli\u003eLength: nine yards — suitable for several projects or continuous runs\u003c\/li\u003e\n  \u003cli\u003eIncludes a resealable clamshell to maintain freshness and usability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I remove Solvy after stitching?\u003c\/h3\u003e\n\u003cp\u003eRemoving Solvy is simple: soak or rinse the sewn item in water and the stabiliser will dissolve away, leaving only your stitches and the fabric. For quicker removal, use warm water and gentle agitation; for stubborn edges, a short soak helps loosen residue.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDissolves completely in water — no chemical solvents required\u003c\/li\u003e\n  \u003cli\u003eUse warm water to speed dissolution, then air-dry or press per fabric instructions\u003c\/li\u003e\n  \u003cli\u003eSafe on a wide range of textiles since it only provides temporary support\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nThe Sulky Solvy roll is aimed at stitchers, home embroiderers, quilting hobbyists, costume makers, and craft professionals who need a temporary stabiliser that won’t show on the finished piece. It’s particularly useful when working with fine fabrics, knits, or layered appliqué where clean edges and exact placement matter. If you want a reliable, easy-to-store solution for templates, stitch support, and pattern tracing that washes away completely, this water-soluble roll is built for those projects.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Sulky Solvy safe to wash out?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It dissolves completely in water and rinses away without leaving residue on fabric.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What fabrics work best with this stabiliser?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Ideal for knits, delicate wovens, and projects needing precise stitch placement or temporary templates.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55253618491729,"sku":"B0018N97ZM","price":31.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-solvy-roll-front.jpg?v=1791661570"},{"product_id":"sulky-tender-touch-cut-away-iron-on-backing-8in-x-9-yd-white-lightweight-stretch-friendly","title":"Sulky Tender Touch Cut-Away Iron-On Backing 8in x 8.2 m White — Lightweight, Stretch-friendly","description":"\u003cp\u003e\u003cstrong\u003eSulky Tender Touch is a lightweight, permanent cut-away iron-on backing designed to sit behind finished embroidery to protect skin and move with stretch fabrics.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis thin, soft stabiliser bonds to the reverse of embroidered items to create a smooth, non-abrasive surface that helps prevent scratchy stitches from contacting the wearer. Its gentle stretch properties make it especially suitable for garments that flex—like activewear, swimwear, and garments with spandex—while remaining durable and long lasting. Sold in white on an 8-inch by 9-yard roll (June Berry colour code 664-08), this product is made in the United States and is intended for final-cover use after embroidery is complete.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Tender Touch protect skin without adding bulk?\u003c\/h3\u003e\n\u003cp\u003eThe material is engineered to be thin yet permanent, so it creates a soft barrier without noticeably altering the garment’s hand or fit. Because it’s cut-away, excess stabiliser around the design is removed, leaving only what’s necessary behind the stitches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThin, low-profile finish prevents stiffness under garments\u003c\/li\u003e\n  \u003cli\u003eSoft surface reduces abrasion against sensitive skin\u003c\/li\u003e\n  \u003cli\u003eCut-away design stays clear of embroidery edges for a seamless look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this backing stretch with knits and activewear?\u003c\/h3\u003e\n\u003cp\u003eYes — Tender Touch was developed to accommodate fabrics that move. Its slight stretch follows the fabric’s recovery so the embroidery won’t restrict motion or cause puckering on elasticity-prone materials.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with spandex, athletic jerseys, and stretch knits\u003c\/li\u003e\n  \u003cli\u003eMaintains shape with repeated wear and movement\u003c\/li\u003e\n  \u003cli\u003eHelps prevent embroidery from tearing or distorting stretch fabrics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply this iron-on backing to finished embroidery?\u003c\/h3\u003e\n\u003cp\u003eAfter completing the embroidery, position the adhesive side against the garment’s wrong side and press according to heat settings appropriate for the fabric. Trim away the excess stabiliser around the design to leave a clean, cushioned back.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIron-on adhesive bonds quickly with firm pressure\u003c\/li\u003e\n  \u003cli\u003eCut away excess stabiliser for a neat finish and less bulk\u003c\/li\u003e\n  \u003cli\u003eFollow garment heat tolerance to avoid damage during application\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this product suitable for baby clothing and lingerie?\u003c\/h3\u003e\n\u003cp\u003eTender Touch is an excellent option for items worn close to the skin because of its soft feel and non-irritating surface. Use it to make embroidered areas comfortable for infants, children, and adults who prefer a gentler inside finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended for baby garments, lingerie, and sleepwear\u003c\/li\u003e\n  \u003cli\u003eReduces scratchiness from dense or decorative stitching\u003c\/li\u003e\n  \u003cli\u003ePermanent bond helps the finish survive laundering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Sulky Tender Touch cut-away iron-on backing is aimed at embroiderers, small apparel manufacturers, and hobby sewers who need a low-profile, skin-friendly finish for embroidered garments. It’s particularly useful when working with stretch fabrics, children’s clothing, or any item where comfort and a smooth interior surface are priorities. The roll format (8\" by 9 yd) gives ample length for multiple projects, and its US manufacturing provides traceable origin for professional makers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can Tender Touch be used on swimwear?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Its gentle stretch and permanent bond make it suitable for swimwear and other stretch fabrics when applied with appropriate heat.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much product is on the roll?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The roll measures 8 inches wide by 9 yards long in white (June Berry code 664-08).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55254203072849,"sku":"B001EQTFKA","price":30.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-tender-touch-front-roll.jpg?v=1791670942"},{"product_id":"sulky-tearaway-stabilizer-12-x-12yd-roll-iron-on-for-knits-stretch-fabrics","title":"Sulky Tearaway Stabiliser 12\" x 11 m Roll — Iron-On, for Knits \u0026 Stretch Fabrics","description":"\u003cp\u003e\u003cstrong\u003eSulky Totally Stable is an iron-on tearaway stabiliser that gives fast, reliable hold for knits, stretchy fabrics and delicate materials without residue.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen embroidering, monogramming or doing precision applique on fabrics that move or stretch, choosing the right stabiliser makes the difference between crisp stitches and puckered seams. Sulky Totally Stable arrives on a 12-inch wide by 12-yard roll in white, ready to be pressed onto materials to stop shifting and distortion during stitching. It adheres quickly, supports your needlework, and then tears away cleanly so you can reveal your finished piece with smooth edges.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this stabiliser make embroidery on knits and stretch fabrics easier?\u003c\/h3\u003e\n\u003cp\u003eTotally Stable bonds to the fabric surface when ironed, preventing fabrics from stretching, sliding, or bunching while the machine sews. That temporary hold keeps stitches even and reduces the need for manual pinning or extra hands. After stitching, the stabiliser tears away, leaving the fabric soft and wearable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIron-on application for immediate stabilisation\u003c\/li\u003e\n  \u003cli\u003ePrevents fabric distortion during machine embroidery\u003c\/li\u003e\n  \u003cli\u003eTears away cleanly without leaving gummy residue\u003c\/li\u003e\n  \u003cli\u003eWorks especially well on knits, jerseys and other stretch textiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the best way to apply and remove Sulky Totally Stable?\u003c\/h3\u003e\n\u003cp\u003eCut a piece slightly larger than your design, press the adhesive side to the wrong side of the fabric with an iron according to fabric heat tolerance, then stitch as usual. When your embroidery is finished, gently tear the excess stabiliser away starting from an edge; any small fragments can be removed by light brushing or tweezers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut larger than design for full coverage and stability\u003c\/li\u003e\n  \u003cli\u003eUse a dry or low-moisture iron setting suitable for the fabric\u003c\/li\u003e\n  \u003cli\u003eTear gently from outer edges toward the design\u003c\/li\u003e\n  \u003cli\u003eBrush away remaining bits for a smooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich projects benefit most from this 12\" x 12yd roll?\u003c\/h3\u003e\n\u003cp\u003eThis roll is sized for frequent small- to medium-scale projects—think shirts, tote bags, patches and home décor items—while still being easy to store. Because it’s acid free and leaves no sticky residue, it’s also suitable for heirloom sewing and delicate surfaces where permanence would be a problem.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonogramming and logo embroidery on tees and polos\u003c\/li\u003e\n  \u003cli\u003eComputerized embroidery and punch-needle work\u003c\/li\u003e\n  \u003cli\u003eApplique, cutwork and heirloom sewing projects\u003c\/li\u003e\n  \u003cli\u003eQuilting and serging where temporary hold is needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this stabiliser affect ornament or fabric hand after removal?\u003c\/h3\u003e\n\u003cp\u003eBecause Sulky Totally Stable tears away without sticky residue, the fabric retains its original feel and flexibility. It provides necessary support only during stitching; once removed, garments and textiles remain soft and wearable without stiff or shiny patches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to tear away cleanly for minimal fabric change\u003c\/li\u003e\n  \u003cli\u003eLeaves no adhesive residue or stiff spots when removed correctly\u003c\/li\u003e\n  \u003cli\u003eSuitable for performance fabrics and garments that require comfort\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Sulky Totally Stable 12\" x 12yd roll is aimed at hobbyists and professionals who need a reliable, quick-melting stabiliser for stretchy fabrics and delicate projects. If you do frequent machine embroidery, monogramming, applique or heirloom sewing and want a product that adheres firmly during stitching but removes without a trace, this roll offers a convenient, economical solution in a craftroom-friendly size.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Sulky Totally Stable good for knit fabrics?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it bonds quickly to knits and stretch fabrics, keeping them stable during stitching and tearing away cleanly afterward.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I remove excess stabiliser after stitching?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Tear gently from the outer edges toward the design; use tweezers or a soft brush for any small remnants.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55254477996369,"sku":"B001701S26","price":33.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-totally-stable-roll-front-view.jpg?v=1791677099"},{"product_id":"sulky-sticky-plus-self-adhesive-tear-away-stabilizer-roll-8-25-x-6-yd-clear-pressure-sensitive-adhesive-for-embroidery","title":"Sulky Sticky Plus Self-Adhesive Tear-Away Stabiliser Roll 8.25\" x 5.5 m Clear — Pressure-Sensitive Adhesive for Embroidery","description":"\u003cp\u003e\u003cstrong\u003eSulky Sticky Plus is a clear, self-adhesive tear-away stabiliser roll designed for computerized embroidery, offering secure, temporary hold for small or hard-to-hoop areas without heat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you need precise embroidery on pockets, collars, caps or narrow strips where traditional basting is impractical, a sticky stabiliser makes the job faster and cleaner. This Sulky 551-08 roll pairs a tear-away stabiliser with a removable paper backing and a pressure-sensitive adhesive so fabric stays put in the hoop and under the needle. It’s acid-free, made in Germany, and intended to prevent hoop marks while letting you remove the backing and tear away excess cleanly after stitching.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this stabiliser hold fabric without sewing or heat?\u003c\/h3\u003e\n\u003cp\u003eThe product uses a pressure-activated adhesive on one side of a tear-away web, backed by a release sheet you peel away before hooping or placing under the hoop. The sticky surface grips fabric securely during machine embroidery so you don’t need to baste or use heat to set it.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelf-adhesive layer clings to most woven and some knit fabrics\u003c\/li\u003e\n  \u003cli\u003ePaper release sheet protects adhesive until ready to use\u003c\/li\u003e\n  \u003cli\u003eNo iron or heat-setting required for temporary tack\u003c\/li\u003e\n  \u003cli\u003eTear-away construction removes cleanly after stitching\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat projects benefit most from Sulky Sticky Plus?\u003c\/h3\u003e\n\u003cp\u003eThis roll excels on small or awkward pieces where hooping the entire garment is impossible or where basting would be time-consuming. It’s especially useful for caps, cuffs, button bands, ribbons, and tight or curved areas.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCaps and curved brims — prevents fabric shifting during dense designs\u003c\/li\u003e\n  \u003cli\u003ePockets, collars and cuffs — anchors small sewing areas without full hooping\u003c\/li\u003e\n  \u003cli\u003eTrim, ribbons and button rows — allows precise placement and stable stitching\u003c\/li\u003e\n  \u003cli\u003eLight- to medium-weight fabrics — reduces hoop marks and distortion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do you apply and remove the stabiliser cleanly?\u003c\/h3\u003e\n\u003cp\u003eCut the amount needed, peel off the paper backing, and press the adhesive side onto the fabric or into the hoop. After embroidering, simply tear the excess stabiliser away from the stitched area and remove any remaining bits; the stabiliser is designed to break away without leaving a stiff residue.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrim to size before removing release sheet for easy handling\u003c\/li\u003e\n  \u003cli\u003ePress gently to set adhesive; avoid overstretching fabric\u003c\/li\u003e\n  \u003cli\u003eTear away stabiliser from design edges, then pick away small remnants\u003c\/li\u003e\n  \u003cli\u003eStore remaining roll with release sheet to preserve tack\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this adhesive stabiliser damage delicate fabrics or leave marks?\u003c\/h3\u003e\n\u003cp\u003eSulky Sticky Plus is acid-free and formulated to minimize hoop impressions when used correctly, but always test on a scrap first. The adhesive is meant to be temporary; removal should leave fabric intact if you follow recommended application and removal steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAcid-free composition helps protect fibres and colours\u003c\/li\u003e\n  \u003cli\u003eRecommended testing on delicate or specialty fabrics before use\u003c\/li\u003e\n  \u003cli\u003eDesigned to reduce hoop marks compared with traditional hooping alone\u003c\/li\u003e\n  \u003cli\u003eRemove gently to avoid pulling on delicate fibres\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Sulky Sticky Plus is aimed at home embroiderers and small production studios that need reliable temporary adhesion for computerized machine embroidery. It’s a practical choice for sewists who work with caps, tight curves, trim, or any small area that’s difficult to baste, and for anyone who wants faster setup and cleaner results without using heat.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Sulky Sticky Plus on caps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The adhesive layer secures curved cap surfaces for embroidery without basting, making stitching on brims and crowns easier.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it require heat to activate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The stabiliser is pressure-sensitive and ready to use without heat; peel the backing and press into place.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55254479405393,"sku":"B0018N9BOO","price":35.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-sticky-roll-front-packaging.jpg?v=1791677173"},{"product_id":"sulky-stiffy-firm-tear-away-stabilizer-8-x-11-yd-white-heavyweight-support-for-embroidery-applique","title":"Sulky Stiffy Firm Tear-Away Stabiliser — 8\" x 10.1 m White, Heavyweight Support for Embroidery \u0026 Appliqué","description":"\u003cp\u003e\u003cstrong\u003eSulky Stiffy is a firm, crisp tear-away stabiliser that gives embroidery, satin stitching and appliqué the structured support they need while tearing away cleanly afterward.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen precision stitching matters, the right stabiliser keeps fabric flat, threads even and designs true to shape. Sulky of America Stiffy Firm Tear-Away Stabiliser is a heavyweight, white stabiliser on an 8\" width roll with 11 yards of material, engineered to stop fabric distortion and puckering during dense or satin-stitched work. It removes easily by hand once stitching is complete, leaving your finished piece smooth and professional-looking.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this stabiliser improve satin stitching and monograms?\u003c\/h3\u003e\n\u003cp\u003eFirm backing prevents stitches from sinking or shifting, giving satin-stitch edges a clean, high-definition look. Because Stiffy resists stretching and movement, letters and dense fills keep their intended shape instead of pulling inward or bubbling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents tunneling and stitch displacement on tight satin rows\u003c\/li\u003e\n  \u003cli\u003eMaintains crisp monogram outlines for sharp lettering\u003c\/li\u003e\n  \u003cli\u003eWorks with dense fills to reduce puckering around motifs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use Stiffy for appliqué and detailed embroidery?\u003c\/h3\u003e\n\u003cp\u003eYes—its rigid hand stabilises small pieces and intricate designs during stitching so appliqué pieces stay flat and edges remain neat. The tear-away finish means you can remove excess support quickly without specialty tools, preserving delicate seams.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports small appliqué shapes for accurate placement\u003c\/li\u003e\n  \u003cli\u003eHelps maintain even stitch tension on fine details\u003c\/li\u003e\n  \u003cli\u003eTears away cleanly to avoid damage to fabric or stitches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fabrics and machines work best with this product?\u003c\/h3\u003e\n\u003cp\u003eSulky Stiffy is suitable for woven and knit garments, home décor fabrics and canvas where firm support is required. It performs well on home and commercial embroidery machines when used beneath the work area or as a hooping layer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGood for shirts, towels, bags, jackets and upholstery fabrics\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard embroidery and sewing machines\u003c\/li\u003e\n  \u003cli\u003eCan be layered with other stabilisers for tailored support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply and remove the stabiliser for best results?\u003c\/h3\u003e\n\u003cp\u003eHoop your fabric with the Stiffy beneath it or fuse it temporarily if your project requires extra hold during stitching. After embroidering, gently tear away the stabiliser from the stitched area, working from the outside inward to preserve stitch integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHoop fabric with stabiliser between hoop and material for stable stitching\u003c\/li\u003e\n  \u003cli\u003eTear slowly at an angle to avoid pulling thread or fabric\u003c\/li\u003e\n  \u003cli\u003eTrim remaining bits close to stitches with small scissors for a clean finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Sulky Stiffy Firm Tear-Away Stabiliser is aimed at hobbyists and professionals who demand precise results from satin stitches, dense embroidery and appliqué. If you work with detailed lettering, dense fills or fabrics that tend to shift, this product offers the rigid support and straightforward removal that speed production and improve finish quality. It’s also a practical choice for educators and small-business makers looking for a reliable, easy-to-use stabiliser on an 8\" roll with 11 yards of supply.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this stabiliser washable after stitching?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Sulky Stiffy is a tear-away product designed to be removed before washing. Any small remnants can be laundered normally after complete removal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I hoop fabric with Stiffy in place?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Absolutely. Hoop Stiffy beneath or with your fabric for firm support; tear away after stitching for best results.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55254573416785,"sku":"B001948PJE","price":34.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-stiffy-front-view.jpg?v=1791680662"},{"product_id":"sulky-tear-easy-stabilizer-roll-12-inch-x-11-yard-white-tear-away-backing-for-embroidery-lightweight-support","title":"Sulky Tear-Easy Stabiliser Roll — 12-inch x 10.1 m White Tear-Away Backing for Embroidery, Lightweight Support","description":"\u003cp\u003e\u003cstrong\u003eSulky 751-12 Tear-Easy Stabiliser is a soft, lightweight, tear-away backing on a 12\" by 11-yard roll designed to stabilise delicate or stretchy fabrics during embroidery and decorative stitching without distorting stitches.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you work with appliqué, machine embroidery, monograms, quilting or decorative stitching, choosing the right stabiliser makes the difference between crisp results and puckering or pulled threads. Sulky's Tear-Easy offers a balance of firm support during stitching and effortless removal afterward. The white, acid-free roll is convenient for projects that need multiple layers of support or variable coverage across different fabric types.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Sulky Tear-Easy keep stitches looking sharp?\u003c\/h3\u003e\n\u003cp\u003eThe stabiliser temporarily supports fabric fibres so needles form uniform stitches rather than stretching or sinking into the material. Because it's lightweight yet stable, it prevents distortion while staying unobtrusive under dense designs. After stitching, you simply tear away the layers cleanly to reveal precise embroidery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSoft, non-abrasive texture protects fabric and thread\u003c\/li\u003e\n  \u003cli\u003eProvides firm support for dense or satin stitches\u003c\/li\u003e\n  \u003cli\u003eTears away cleanly to avoid tugging stitches during removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I use one or more layers of Tear-Easy?\u003c\/h3\u003e\n\u003cp\u003eProfessionals often layer the stabiliser to match fabric weight and stitch density—use a single layer for light decorative stitching and add layers for stretchy or loosely woven fabrics. The roll format lets you apply full-width coverage or cut custom pieces for hooping. Each layer can be removed separately, enabling precise removal without disturbing the embroidery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 layer: light decorative stitching on stable fabrics\u003c\/li\u003e\n  \u003cli\u003e2 layers: medium density or slightly stretchy fabrics\u003c\/li\u003e\n  \u003cli\u003e3 layers: heavy stitch-fill areas or very stretchy materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply and remove the stabiliser for best results?\u003c\/h3\u003e\n\u003cp\u003eCut a piece slightly larger than your hoop, position under the fabric, and hoop both layers together for maximum alignment. Stitch your design at recommended tensions and use the appropriate needle size. After stitching, start tearing from the outer edge and peel layers away gently toward the stitching to avoid accidental pulling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrim to fit hoop with margin around the design\u003c\/li\u003e\n  \u003cli\u003eHoop fabric and stabiliser together to prevent slippage\u003c\/li\u003e\n  \u003cli\u003eTear from outside edges toward the stitching for clean removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFeatures at a glance: the Sulky 751-12 roll measures 12 inches wide and runs 11 yards, giving ample material for multiple projects; it’s white and acid-free to protect colours and fibres; and its tear-away nature prevents distortion so your stitches remain neat and true.\u003c\/p\u003e\n\n\u003cp\u003eWho is this product for?\u003c\/p\u003e\n\u003cp\u003eThis Tear-Easy roll is aimed at hobbyists and professional stitchers who need a reliable tear-away stabiliser for appliqué, machine embroidery, monogramming and decorative quilting, especially when working with delicate, stretchy, or loosely woven fabrics. If you value easy removal, layered stability options, and a roll large enough to supply multiple projects, Sulky 751-12 is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Sulky Tear-Easy suitable for stretchy fabrics?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Use two or three layers for stretchy fabrics to prevent puckering and then tear layers away after stitching.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How large is the Sulky 751-12 roll?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The roll is 12 inches wide and 11 yards long, enough for multiple projects and custom cuts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55254631186769,"sku":"B00023KJWO","price":33.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-front-packaging.jpg?v=1791682430"},{"product_id":"sulky-crossroads-cotton-petites-12-weight-thread-set-multicolor-10-pack-50-yd-spools-for-visible-topstitching","title":"Sulky Crossroads Cotton Petites 12-weight Thread Set, Multicolour 10-Pack — 45.7 m Spools for Visible Topstitching","description":"\u003cp\u003e\u003cstrong\u003eSulky's Crossroads Cotton Petites pack delivers ten coordinated 12-weight cotton threads on 50-yard spools for decorative stitching and hand embroidery.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis curated set of Sulky 12 wt cotton threads was selected to complement the Crossroads Denim collection by Amy Barickman. Each Petite spool contains 50 yards of thread that is notably heavier than Sulky's 30 wt, offering more body and texture for visible topstitching, bold embroidery lines, and creative embellishment. The pack includes ten carefully matched hues in a convenient assortment, imported from Italy and ready for both machine decorative work and hand-sewn accents.\u003c\/p\u003e\n\n\u003ch3\u003eHow does 12-weight cotton differ from finer threads for decorative work?\u003c\/h3\u003e\n\n\u003cp\u003e12-weight cotton is approximately 40% thicker than a 30-weight cotton, making it a strong choice when you want stitches that stand out. The extra thickness creates a pronounced texture and holds up well on medium- to heavy-weight fabrics like denim, home décor, and mixed-fabric projects.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e50-yard Petite spools for approachable, low-waste sampling\u003c\/li\u003e\n  \u003cli\u003eHeavier body produces visible topstitching and textured hand embroidery\u003c\/li\u003e\n  \u003cli\u003eWorks well with medium\/heavy fabrics such as denim and canvas\u003c\/li\u003e\n  \u003cli\u003eSuitable for decorative machine stitching and handwork\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich projects benefit most from the Crossroads colour selection?\u003c\/h3\u003e\n\n\u003cp\u003eThe colour choices are handpicked to coordinate with the Crossroads Denim palette, so they’re ideal for projects that need tonal harmony or contrasting highlights. Use them to accent seams, add embroidery motifs, or create decorative quilting that ties into denim-inspired fabrics.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDenim garments and jean repair accents\u003c\/li\u003e\n  \u003cli\u003eDecorative quilting and visible quilting motifs\u003c\/li\u003e\n  \u003cli\u003eHand embroidery borders and fill stitches\u003c\/li\u003e\n  \u003cli\u003eAppliqué edges and topstitch detail work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about spool size, handling, and compatibility?\u003c\/h3\u003e\n\n\u003cp\u003eEach Petite spool contains 50 yards, making the set convenient for sampling multiple colours without large storage needs. The thicker 12 wt thread feeds well through many decorative sewing machine feet, though a bigger needle (e.g., size 90\/14 or 100\/16) can help prevent skipped stitches. For handwork, this weight provides strong, textured lines that are easy to see and manipulate.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e50-yard Petite spools — compact and low-waste\u003c\/li\u003e\n  \u003cli\u003eTry larger needles for smoother machine stitching\u003c\/li\u003e\n  \u003cli\u003eHand embroidery needles accommodate 12 wt for bold stitches\u003c\/li\u003e\n  \u003cli\u003eImported from Italy for consistent dyeing and quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I care for projects stitched with this cotton thread?\u003c\/h3\u003e\n\n\u003cp\u003eSulky's cotton thread is colourfast under normal laundering, but for best results test a scrap first, especially with dark or highly saturated colours. Use gentle washing when possible and avoid prolonged, aggressive bleaching. Press on the appropriate heat setting for cotton, protecting delicate trims if present.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTest colorfastness on scrap fabric before laundering\u003c\/li\u003e\n  \u003cli\u003eMachine wash on gentle settings for embroidered garments\u003c\/li\u003e\n  \u003cli\u003eAvoid harsh bleach to preserve thread colour vibrancy\u003c\/li\u003e\n  \u003cli\u003ePress on cotton settings, using a protective cloth if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Makers who want bold, visible stitching—quilters, garment sewists working with denim, and hand-embroidery enthusiasts—will appreciate this compact, coordinated set. The Sulky Crossroads Cotton Petites pack is especially useful when you need multiple harmonized colours without committing to full-size spools, and for anyone seeking durable, textured thread that pairs well with medium- to heavy-weight fabrics.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePackaging details:\u003c\/em\u003e 10 colours per pack, each on a 50-yard spool; product dimensions approximately 2.59 cm length, 31.394 cm height, and 4.394 cm width. Made in Italy.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the spool length of each Petite thread?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each Petite spool contains 50 yards of Sulky 12-weight cotton thread.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these threads on denim?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—12 wt cotton is well suited for denim topstitching, decorative seams, and visible embroidery.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55254652453201,"sku":"B018HB7C6S","price":33.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-crossroads-front-packaging.jpg?v=1791683133"},{"product_id":"sulky-solvy-water-soluble-stabilizer-roll-12-x-9-yd-lightweight-dissolving-support-for-embroidery-applique","title":"Sulky Solvy Water-Soluble Stabiliser Roll, 12\" x 8.2 m — Lightweight, Dissolving Support for Embroidery \u0026 Appliqué","description":"\u003cp\u003e\u003cstrong\u003eSulky Solvy 486-12 is a lightweight, water-soluble stabiliser roll that supports stitching and then completely disappears with water for a clean finish.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for machine and hand needlework, this original Sulky water-soluble stabiliser gives clear temporary support for embroidery, applique, quilting, monograms and delicate heirloom sewing. It lays down easily, accepts markings and machine stitching without bulk, and rinses away cleanly so no backing shows on the final piece. The roll measures 12 inches wide by 9 yards long and is acid-free for fabric-safe use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Solvy help when embroidering delicate fabrics?\u003c\/h3\u003e\n\u003cp\u003eSolvy provides a stable surface to stitch on without adding weight or stiffness to fragile materials. It holds stitches in place during sewing and then dissolves, eliminating the need to tear or cut backing away and avoiding damage to weak fabrics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates a temporary, supportive surface for fine linen and chiffon\u003c\/li\u003e\n  \u003cli\u003ePrevents puckering by stabilising stitches\u003c\/li\u003e\n  \u003cli\u003eDissolves completely in water—no residue on the fabric\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this stabiliser for appliqué, cutwork, or buttonholes?\u003c\/h3\u003e\n\u003cp\u003eYes — Sulky Solvy works as a transfer layer and stitch guide for precise applique placement, openwork, and clean buttonhole finishes. It supports the fabric during cutting and stitching, then rinses away to leave edges neat and soft.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse as a pattern guide for accurate placement and cuts\u003c\/li\u003e\n  \u003cli\u003eSupports edges for crisp, open cutwork details\u003c\/li\u003e\n  \u003cli\u003eIdeal under buttonholes to keep openings neat without visible backing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical steps do I take to apply and remove Solvy?\u003c\/h3\u003e\n\u003cp\u003eCut the stabiliser to size, baste or tack it to the fabric if needed, stitch your design, then wet the area with water to dissolve the Solvy. For quicker removal, rinse or soak in cool water until all traces disappear; allow the piece to dry flat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrim to slightly larger than the design area\u003c\/li\u003e\n  \u003cli\u003eTack or temporary-adhere if working on multiple layers\u003c\/li\u003e\n  \u003cli\u003eSoak or rinse until fully dissolved, then air-dry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is Sulky Solvy different from tearaway or cutaway stabilisers?\u003c\/h3\u003e\n\u003cp\u003eUnlike tearaway or cutaway types that remain in the project or require removal by tearing or cutting, Solvy dissolves in water so there’s no leftover backing material. This makes it the preferred choice when you want an invisible finish on both sides of the fabric.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLeaves no permanent backing after rinsing\u003c\/li\u003e\n  \u003cli\u003eReduces bulk on lightweight or transparent fabrics\u003c\/li\u003e\n  \u003cli\u003eUseful where access to the back is limited or delicate stitching must remain unobstructed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? Sulky Solvy 486-12 is aimed at embroiderers, quilters, textile artists and sewists who need a reliable, temporary support that won’t alter the final look of their work. It’s especially useful for projects with delicate fabrics, intricate cutwork, or when a completely invisible backing is desired.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will Solvy dissolve completely without staining fabric?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Sulky Solvy rinses away in water and is acid-free, leaving no residue or staining when thoroughly dissolved and rinsed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What width and length does this roll come in?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This Sulky Solvy roll is 12 inches wide and contains 9 yards of stabiliser.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55254874128721,"sku":"B001705SVS","price":31.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-solvy-roll-front-packaging.jpg?v=1791690071"},{"product_id":"sulky-ultra-solvy-water-soluble-stabilizer-8-x-8-yd-extremely-firm-stable-extra-heavy-for-dense-embroidery","title":"Sulky Ultra Solvy water-soluble stabiliser 8\" x 7.3 m — Extremely Firm \u0026 Stable, extra-heavy for dense embroidery","description":"\u003cp\u003e\u003cstrong\u003eSulky Ultra Solvy Extremely Firm \u0026amp; Stable is a heavy, clear water-soluble stabiliser designed to provide the firmest temporary support for computerized lace and decorative stitching.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis extra-heavy Solvy is four times firmer, thicker and stronger than Sulky's original Solvy, offering a clear, traceable surface that dissolves cleanly in water when your stitching is complete. It’s formulated to hold up under dense embroidery and stabilises fabrics and stitched areas that need temporary rigidity without leaving residue. The product ships in an 8-inch wide roll that runs 8 yards, sized for hoops and larger machine projects.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Sulky Ultra Solvy improve lace embroidery?\u003c\/h3\u003e\n\u003cp\u003eUltra Solvy gives lace designs a rigid foundation so dense stitches maintain shape and alignment while the machine sews. Because it’s clear and extra firm, you can trace designs precisely and stitch through multiple layers without puckering. When soaked, it disappears entirely, leaving crisp lace edges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour times firmer than standard Solvy for heavy-density designs\u003c\/li\u003e\n  \u003cli\u003eClear surface for accurate tracing and placement\u003c\/li\u003e\n  \u003cli\u003eHolds up during long, intricate embroidery runs\u003c\/li\u003e\n  \u003cli\u003eDissolves fully in water—no scraping or residue\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this stabiliser for decorative stitch sewing and mixed media?\u003c\/h3\u003e\n\u003cp\u003eYes — it’s ideal for decorative stitches on fabrics that need temporary support, such as knits and lightweight wovens. The stiffness prevents distortion from heavy thread or multiple stitch passes, and you can layer it under embellishments or appliqués for added structure. After laundering or rinsing, the stabiliser removes cleanly without affecting fabric drape.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports knits and lightweight fabrics during heavy stitching\u003c\/li\u003e\n  \u003cli\u003eWorks well under appliqués, beads, and dense decorative areas\u003c\/li\u003e\n  \u003cli\u003eRemoves with a simple cold-water soak or rinse\u003c\/li\u003e\n  \u003cli\u003eAvailable in roll size convenient for hooping or cutting to shape\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the practical details: sizes, colours, and packaging?\u003c\/h3\u003e\n\u003cp\u003eThe product listed is an 8-inch wide roll by 8 yards long—compact for storage yet long enough for multiple projects. Multiple model numbers and colour batch codes are associated with the Ultra Solvy line, and packaging dimensions make it easy to stash in a sewing drawer or kit. You’ll find it labeled with model numbers referenced for inventory and reorders.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRoll size: 8\" width x 8 yards length (408-08)\u003c\/li\u003e\n  \u003cli\u003eAssociated model numbers: 8053, 8024, 8003, 8006\u003c\/li\u003e\n  \u003cli\u003eColour\/lot references include #8050, #8040, #8012, #8013, #8020, #8017\u003c\/li\u003e\n  \u003cli\u003ePackage dimensions: roughly 5.4\" H × 15.4\" L × 3.2\" W for storage planning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Sulky Ultra Solvy Extremely Firm \u0026amp; Stable is targeted at machine embroiderers, lace makers, and sewists who tackle dense, detailed designs and need the sturdiest temporary support available. If you work with computerized lace, high-density motifs, appliqué with heavy thread, or mixed-media embroidery where precision and shape retention matter, this extra-heavy stabiliser will help produce cleaner results and simplify finishing by washing away completely.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will Sulky Ultra Solvy dissolve completely in cold water?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Ultra Solvy dissolves cleanly in cold water; soak or rinse until all stabiliser washes away.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I hoop this stabiliser directly or should I baste it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can hoop it for many designs, but for delicate fabrics basting the project to the stabiliser adds extra security.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55255313056081,"sku":"B0018N44NC","price":38.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-ultra-solvy-front-packaging.jpg?v=1791703818"},{"product_id":"sulky-sticky-self-adhesive-tear-away-stabilizer-roll-12-in-x-6-yd-white-adhesive-support-for-machine-embroidery","title":"Sulky Sticky Self-Adhesive Tear-Away Stabiliser Roll — 12 in x 5.5 m White, Adhesive Support for Machine Embroidery","description":"\u003cp\u003e\u003cstrong\u003eSulky 551-12 Sticky Self-Adhesive Tear-Away Stabiliser is a paper-backed, self-adhesive non-woven stabiliser roll made for machine embroidery, letting you hoop, position, and embroider small or tricky areas without basting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Sulky stabiliser combines a removable release paper with a tacky non-woven backing so you can press fabric onto the exposed adhesive and stitch immediately. The stabiliser holds fabric securely while you embroider, and then tears away cleanly when stitching is finished. It’s white, acid-free, 12 inches wide and supplied on a 6-yard roll to cover a range of projects from patches to garment trims.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this stabiliser simplify embroidering small or awkward areas?\u003c\/h3\u003e\n\u003cp\u003eThe sticky backing eliminates the need to baste tiny pieces before hooping, so details like pockets, cuffs, collars and ribbons stay flat and in place. Because the release paper protects the adhesive until you’re ready, you can score and expose only the exact area you need.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eScore the release paper where you want adhesive exposed for precise placement.\u003c\/li\u003e\n  \u003cli\u003ePress the fabric onto the sticky area to hold it steady during stitching.\u003c\/li\u003e\n  \u003cli\u003eTear away the stabiliser cleanly after embroidery; no dissolving or washing required.\u003c\/li\u003e\n  \u003cli\u003eWorks well for trims, small motifs, and tricky fabric edges without hoop marks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work with knits, fleece, velvet and sweatshirt materials?\u003c\/h3\u003e\n\u003cp\u003eYes — the non-woven composition and moderate tack were designed to support stretch and pile fabrics during machine embroidery without compressing the material. It stabilises the fabric surface so stitches lay neatly and prevents shifting commonly seen on stretchy or textured textiles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for knit and stretch fabrics where hooping can distort the piece.\u003c\/li\u003e\n  \u003cli\u003eEffective on pile and velvet because it holds fibres down for cleaner stitches.\u003c\/li\u003e\n  \u003cli\u003eHelpful for fleece and sweatshirt fabric that can pull or pucker under the needle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the Sulky 551-12 roll in my hooped projects?\u003c\/h3\u003e\n\u003cp\u003eCut the width you need from the 12-inch roll, hoop with the release paper in place, and score the paper where adhesive should be exposed. Peel back the paper, press the fabric onto the sticky area, and embroider as usual; when finished, simply tear the stabiliser away.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHoop the stabiliser with release paper facing up to avoid accidental adhesion.\u003c\/li\u003e\n  \u003cli\u003eScore and remove only the release-paper section you need to limit adhesive exposure.\u003c\/li\u003e\n  \u003cli\u003eAfter stitching, pull the tear-away stabiliser off gently to avoid disturbing stitches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the product dimensions and care notes I should know?\u003c\/h3\u003e\n\u003cp\u003eThe roll is 12 inches wide and 6 yards long, providing multiple small-area applications from one spool. It’s acid-free and non-woven; because it’s a tear-away stabiliser with an adhesive backing, it’s removed mechanically rather than washed away.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDimensions: 12\" width x 6 yards length on the roll.\u003c\/li\u003e\n  \u003cli\u003eColour: white, acid-free for fabric-safe use.\u003c\/li\u003e\n  \u003cli\u003eIntended to tear away after embroidery — not water-soluble or heat-soluble.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Sulky 551-12 Sticky Self-Adhesive Tear-Away Stabiliser is ideal for machine embroidery hobbyists and professionals who stitch on small or difficult-to-hoop areas — including garment decorators, makers working with knits and pile fabrics, and anyone wanting quicker set-up and neater results on pockets, cuffs, collars, ribbons and other tight spots.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this stabiliser under the hoop for embroidery?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Hoop the roll with the release paper intact, score and expose only the needed area, press fabric onto the adhesive, then stitch.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the stabiliser damage delicate fabrics?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It's acid-free and designed to hold fabrics without permanent residue; remove by tearing away gently after stitching.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55257096388945,"sku":"B00023KJWE","price":42.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-sticky-roll-front-packaging_198bf19d-14a9-4334-9542-d7d1ac040e42.jpg?v=1791717043"},{"product_id":"sulky-fabric-solvy-printable-sticky-stabilizer-white-12in-x-6yd-self-adhesive-water-soluble","title":"Sulky Fabric-Solvy Printable Sticky Stabiliser, White 12in x 5.5 m — Self-Adhesive, Water-Soluble","description":"\u003cp\u003e\u003cstrong\u003eSulky Fabric-Solvy Printable Sticky is a self-adhesive, water-soluble stabiliser that you can print, draw, or copy designs onto and stick directly to fabric for clean, hoop-less embroidery and applique.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 12-inch wide, medium-weight white stabiliser comes on a 6-yard roll and behaves like traditional Fabric-Solvy but with a peel-and-stick backing, eliminating the need for temporary adhesives or complicated hooping. Because it contains no paper layer, it dissolves completely in water, leaving crisp stitches and no residue. Use it when you want accurate placement, reversible stitching, or a printable template that adheres to fabric during handwork, machine embroidery, needlepunch, or quilting.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use this printable sticky stabiliser for precise embroidery placement?\u003c\/h3\u003e\n\n\u003cp\u003ePrint, trace, or photocopy your design onto the stabiliser, then peel away the protective release sheet and press the sticky side onto your fabric. The adhesive holds the design in place so you can stitch without a hoop or worry about slipping, and once your stitching is finished you rinse the stabiliser away.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePrint directly from an inkjet or laser copier onto the stabiliser surface.\u003c\/li\u003e\n  \u003cli\u003ePeel the release sheet to expose the adhesive layer before applying to fabric.\u003c\/li\u003e\n  \u003cli\u003eStitch through both stabiliser and fabric; rinses out with warm water when finished.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it affect the look and feel of my finished project?\u003c\/h3\u003e\n\n\u003cp\u003eNo permanent residue remains — this Sulky product dissolves cleanly because it has no paper component. After washing, stitches remain sharply defined and the fabric returns to its original hand, so appliques and embroidered details retain a natural appearance without stiffening.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMedium weight supports stable stitching without adding bulk.\u003c\/li\u003e\n  \u003cli\u003eNo paper fibres means faster, cleaner washing-out compared with paper-backed stabilisers.\u003c\/li\u003e\n  \u003cli\u003eWhite colour is easy to cover with thread or hide under applique pieces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use it for hoop-less or reversible stitching projects?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the self-adhesive backing secures designs so you can work without a hoop, which is ideal for reversible embroidery, hand-stitched embellishments, or layered applique. The sticky backing also simplifies repositioning small pieces during complex quilts or mixed-media textile work.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAdheres to fabric for hoopless embroidery and delicate handwork.\u003c\/li\u003e\n  \u003cli\u003eRemoves cleanly for reversible or double-sided projects.\u003c\/li\u003e\n  \u003cli\u003eWorks well for layering, needle punching, and detailed applique.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the material specs and care instructions?\u003c\/h3\u003e\n\n\u003cp\u003eThis package contains six yards of 12-inch wide white Sulky Fabric-Solvy Printable Sticky, imported and medium weight for general embroidery and applique tasks. After stitching, dissolve the stabiliser completely in warm water and allow your project to dry flat; avoid abrasive scrubbing to protect delicate threads.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSize: 12 inches wide by 6 yards total.\u003c\/li\u003e\n  \u003cli\u003eColour: white medium-weight, printable surface.\u003c\/li\u003e\n  \u003cli\u003eCare: soak in warm water to dissolve, rinse and air-dry flat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Crafters, embroidery enthusiasts, quilters, and textile artists who need a printable, adhesive stabiliser for accurate placement, hoop-less stitching, or projects that must wash away cleanly. It’s especially useful for makers who print or trace templates and want quick, residue-free removal after stitching.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I print designs on this stabiliser?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — you can print, copy, or hand-draw designs onto the printable surface before peeling and sticking it to fabric.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I remove the stabiliser after stitching?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Soak the stitched area in warm water to dissolve the stabiliser; rinse and air-dry for a clean finish.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55294247960913,"sku":"B004DVFRT6","price":45.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-stabilizer-roll-front-packaging.jpg?v=1791927877"},{"product_id":"sulky-stick-n-stitch-wash-away-stabilizer-bundle-2-packs-12-sheets-8-5x11-printable-self-adhesive","title":"Sulky Stick 'n Stitch Wash-Away Stabiliser, Bundle 2 Packs (12 sheets 8.5x11) Printable Self-Adhesive","description":"\u003cp\u003e\u003cstrong\u003eSulky Stick 'n Stitch is a printable, pressure-sensitive wash-away stabiliser sold as a two-pack of twelve 8½ x 11 sheets that temporarily adheres to fabric for precise embroidery and pattern transfer.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for stitchers who want a clean, fabric-like surface for embroidery, punchneedle, cross stitch, quilting templates, and other needlework, this self-adhesive stabiliser removes completely with water. Each bundle includes two packages (twelve sheets total) of 8½ x 11-inch printable stabiliser that behaves like fabric while you work yet dissolves away for a neat, reversible finish. Sulky’s formula is acid- and lead-free and suitable for printing designs from your home inkjet or laser printer.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Stick 'n Stitch simplify transferring patterns onto fabric?\u003c\/h3\u003e\n\n\u003cp\u003eThe printable, pressure-sensitive adhesive lets you print or trace a pattern directly onto the stabiliser and stick it to your fabric in the exact position you need. It stays put during stitching, so registration and alignment are easier and more accurate.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePrint designs on standard 8½ x 11 sheets from home printers.\u003c\/li\u003e\n  \u003cli\u003eAdheres with light pressure—no pins or basting required.\u003c\/li\u003e\n  \u003cli\u003eFabric-like feel while stitching keeps needles behaving predictably.\u003c\/li\u003e\n  \u003cli\u003eRemoves completely with water for a reversible finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this stabiliser for both topping and backing?\u003c\/h3\u003e\n\n\u003cp\u003eYes — Stick 'n Stitch functions as a temporary topper or backing and behaves like fabric during stitching and finishing. Because it rinses away, it’s ideal for projects where both sides must remain clean and unobstructed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTops delicate pile fabrics so stitches sit neatly without sinking.\u003c\/li\u003e\n  \u003cli\u003eWorks as a backing for delicate or loosely woven fabrics for extra support.\u003c\/li\u003e\n  \u003cli\u003eLeaves no residue when dissolved, keeping both fabric sides reversible.\u003c\/li\u003e\n  \u003cli\u003eUseful for embroidered garments, home decor, and heirloom pieces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat stitching techniques and projects benefit most from this stabiliser?\u003c\/h3\u003e\n\n\u003cp\u003eStick 'n Stitch is versatile: it supports hand embroidery, punchneedle, cross stitch, quilting templates, and machine or hand-appliqué. Its printable surface is handy for precision designs and counted-thread techniques where pattern placement matters.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIdeal for embroidery, punchneedle, and cross-stitch designs.\u003c\/li\u003e\n  \u003cli\u003eGreat for quilting and appliqué pattern placement and templates.\u003c\/li\u003e\n  \u003cli\u003eWorks with both hand and machine embroidery processes.\u003c\/li\u003e\n  \u003cli\u003ePrintable sheets enable exact transfer of complex motifs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I remove the stabiliser and care for the finished item?\u003c\/h3\u003e\n\n\u003cp\u003eRemoval is simple: rinse the project in water to dissolve the stabiliser, then allow the fabric to dry. The process leaves no stabiliser on the surface, making it safe for reversible items and pieces that require a soft hand.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRinse in lukewarm water until stabiliser dissolves fully.\u003c\/li\u003e\n  \u003cli\u003eGently blot or lay flat to dry—avoid aggressive wringing.\u003c\/li\u003e\n  \u003cli\u003eSafe for fabrics that tolerate water-based rinsing.\u003c\/li\u003e\n  \u003cli\u003eAcid- and lead-free formula protects fibres and colours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Sewists, embroiderers, quilters, and fibre artists who need a printable, temporary stabiliser that behaves like fabric during stitching and removes completely afterward. If you value exact pattern placement, tidy stitches, and reversible results, this two-pack of Sulky Stick 'n Stitch 8½ x 11 sheets offers a convenient, printer-friendly solution for hobbyists and small-scale professionals alike.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I print designs on Stick 'n Stitch with a home printer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 8½ x 11 sheets are printable on standard inkjet and laser printers for precise pattern transfer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will any residue remain after rinsing the stabiliser?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Sulky Stick 'n Stitch is wash-away and dissolves fully with water, leaving no stabiliser on either side.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55295688999249,"sku":"B0784L3DVF","price":41.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-stick-n-stitch-front-packaging_7a02d253-18f8-416d-ba53-91dc2e98a9f7.jpg?v=1791938523"},{"product_id":"sulky-printable-sticky-stabilizer-8-5x11-2-pack-self-adhesive-washable-sheets-for-hoopless-and-applique","title":"Sulky Printable Sticky Stabiliser 8.5x11 2-Pack - Self-Adhesive Washable Sheets for Hoopless and Applique","description":"\u003cp\u003e\u003cstrong\u003eSulky Printable Sticky Stabiliser is a printable, self-adhesive embroidery stabiliser in 8-1\/2\" x 11\" sheets sold as a convenient two-pack for hoopless, reversible, and hand-embroidery projects.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a printable, non-paper stabiliser that holds designs in place without bulk, Sulky's printable sticky sheets provide a washable, adhesive surface for tracing, printing, or drawing patterns directly onto the stabiliser. Each package contains twelve heavy-weight white sheets sized 8-1\/2 by 11 inches; you receive two packages in this set. The backing peels away to reveal a tacky surface so you can position motifs precisely for applique, needlepunch, quilting, or hand embroidery — and because the product has no paper component, it rinses away cleanly.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use these printable sticky stabiliser sheets?\u003c\/h3\u003e\n\u003cp\u003ePrint or draw your design onto the sheet using an inkjet or copier, then remove the release liner to expose the adhesive. Position the sticky stabiliser over your fabric where you want the design, and proceed with stitching, applique, or needlepunching; stitch through the stabiliser and fabric as needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrint directly or copy a pattern onto the sheet\u003c\/li\u003e\n  \u003cli\u003ePeel off the release liner to reveal the self-stick back\u003c\/li\u003e\n  \u003cli\u003eStick to fabric for hoopless or reversible embroidery\u003c\/li\u003e\n  \u003cli\u003eWash out completely — no paper residue\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it work for hoopless and reversible embroidery?\u003c\/h3\u003e\n\u003cp\u003eYes — the tacky surface keeps fabric and design elements in place without a hoop, making it ideal for projects where hoop marks are a concern. Because the stabiliser dissolves with washing, designs remain reversible and soft after removal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHolds pieces steady for hoopless stitching\u003c\/li\u003e\n  \u003cli\u003eSupports reversible projects because it washes away\u003c\/li\u003e\n  \u003cli\u003ePrevents shifting during applique and handwork\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and quantities are included, and how durable are the sheets?\u003c\/h3\u003e\n\u003cp\u003eEach sheet measures 8-1\/2 by 11 inches; the two-pack contains 24 sheets total (two packages of 12). These are heavy-weight white stabiliser sheets designed to handle printing and stitching without tearing, but they dissolve quickly when laundered, leaving no paper component behind.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24 sheets total: two packages of twelve 8.5\" x 11\" sheets\u003c\/li\u003e\n  \u003cli\u003eHeavy-weight for printing and machine or hand stitching\u003c\/li\u003e\n  \u003cli\u003eNo paper component — rinses away cleanly after laundering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich techniques are best suited to this printable sticky stabiliser?\u003c\/h3\u003e\n\u003cp\u003eIt’s versatile across many textile crafts: use it for hand-embroidery, applique placement, quilting templates, or needlepunch. The printable surface saves time when transferring complex patterns, and the adhesive backing keeps elements exactly where you want them while you work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-embroidery and traced designs\u003c\/li\u003e\n  \u003cli\u003eApplique layout and temporary placement\u003c\/li\u003e\n  \u003cli\u003eNeedlepunch and quilting templates\u003c\/li\u003e\n  \u003cli\u003eIdeal for projects needing precise placement and clean removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Crafters, quilters, and embroidery enthusiasts who want a printable, adhesive stabiliser that holds pieces securely without adding paper bulk. It's especially useful for makers who prefer hoopless techniques, reversible finishes, or precise applique placement, and for designers who need to print or trace detailed patterns directly onto a stabiliser that washes away cleanly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I print designs directly on these sheets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Print, copy, or draw your design on the sheets, then peel and stick for stitching.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the stabiliser wash away without residue?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The product contains no paper component and rinses away quickly and completely.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sulky","offers":[{"title":"Default Title","offer_id":55296765034833,"sku":"B071GLSBRR","price":41.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sulky-front-packaging-sticky-stabilizer.jpg?v=1791948693"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/collections\/sulky-front-packaging-sticky-stabilizer.jpg?v=1792144052","url":"https:\/\/craftiche.co.uk\/collections\/sulky.oembed?page=2","provider":"Craftiche","version":"1.0","type":"link"}