{"title":"Lead Came \u0026 Copper Foil","description":"\u003cp\u003e42 products from 20 brands, including Studio Pro, ARTIMUSES and HUOYOGER. Prices run from £23.08 to £99.16, including VAT. \u003c\/p\u003e\u003cp\u003ePart of our \u003ca href=\"\/collections\/stained-glass\"\u003estained glass \u0026amp; suncatchers\u003c\/a\u003e department. \u003c\/p\u003e","products":[{"product_id":"delta-creative-instant-lead-lines-18-strips-24-in-x-1-8-in-adhesive-flexible-lead-strip-for-stained-glass-outlines","title":"Delta Creative Instant Lead Lines, 18 Strips 24 in x 1\/8 in — Adhesive flexible lead-strip for stained-glass outlines","description":"\u003cp\u003e\u003cstrong\u003eDelta Creative Gallery Glass Instant Lead Lines is a 36-foot roll of adhesive, flexible lead-strip that peels, sticks, trims, and simulates authentic stained-glass leading for windows, bottles, mirrors, and more.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you want the look of classic stained glass without soldering or heavy tools, this Instant Lead Lines roll gives you a quick way to create crisp dividing lines and outlines that hold stained-glass paint. The 1\/8\" width closely mimics traditional lead came; the repositionable adhesive lets you refine placement before committing. Trim to length with scissors or a craft knife and combine with Gallery Glass paints and tools to complete your piece.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I apply the Instant Lead Lines so they stay straight and neat?\u003c\/h3\u003e\n\u003cp\u003eStart by cleaning the surface thoroughly with soap and water or rubbing alcohol to remove oils and dust. Peel back a short section of the backing, align the strip along your guide or pattern, press down gradually, and smooth with a fingertip or a soft card to remove bubbles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean surface well before applying.\u003c\/li\u003e\n  \u003cli\u003ePeel small sections of backing for precise placement.\u003c\/li\u003e\n  \u003cli\u003eSmooth from centre outward to avoid bubbles.\u003c\/li\u003e\n  \u003cli\u003eTrim excess with scissors or a craft blade for clean ends.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich surfaces work best with these adhesive lead lines?\u003c\/h3\u003e\n\u003cp\u003eThe strips adhere well to non-porous and smooth surfaces such as glass, mirrors, plastic, and glazed ceramics. They also perform on common household items like vases, jars, picture frames, and windows—perfect for seasonal décor and DIY gifts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGlass windows, panes, and picture glass.\u003c\/li\u003e\n  \u003cli\u003eMirrors and glazed ceramic pieces.\u003c\/li\u003e\n  \u003cli\u003ePlastic décor items and smooth bottles.\u003c\/li\u003e\n  \u003cli\u003eIndoor, decorative projects—avoid rough or porous substrates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I remove or reposition the lead lines without damaging the surface?\u003c\/h3\u003e\n\u003cp\u003eThe adhesive backing is designed to be repositionable during layout so you can adjust lines before finalizing your design. Removal is possible, but take care—peel slowly and evenly; stronger adhesives or long-term exposure to sunlight may affect residue and require gentle cleaning afterward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReposition while the adhesive is fresh for best results.\u003c\/li\u003e\n  \u003cli\u003ePeel slowly to reduce adhesive residue risk.\u003c\/li\u003e\n  \u003cli\u003eUse rubbing alcohol to remove any leftover adhesive safely.\u003c\/li\u003e\n  \u003cli\u003eTest on a small area if planning temporary vs. permanent use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat supplies should I pair with the Instant Lead Lines for a finished stained-glass look?\u003c\/h3\u003e\n\u003cp\u003eFor complete projects, combine the lead lines with Gallery Glass Stained Glass Paints, the Gallery Glass Tool Set for cutting and smoothing, and pattern sheets to plan your design. These accessories help you fill each compartment accurately and achieve consistent colour and texture.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGallery Glass Stained Glass Paint for opaque or translucent fills.\u003c\/li\u003e\n  \u003cli\u003eGallery Glass Tool Set for trimming and shaping strips.\u003c\/li\u003e\n  \u003cli\u003ePattern sheets or templates for precise layout guidance.\u003c\/li\u003e\n  \u003cli\u003eLint-free cloth and rubbing alcohol for pre-paint cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Delta Creative Gallery Glass Instant Lead Lines are ideal for crafters, teachers, decorators, and hobbyists who want a realistic stained-glass effect without soldering. Whether you're making classroom projects, holiday window décor, upcycling glassware, or producing small craft-business pieces, this 36 ft roll provides a flexible, easy-to-use way to create professional-looking leading. The strips are especially handy for beginners, seasonal decorators, and anyone pairing them with Gallery Glass paints and tools to turn ordinary glass into decorative art.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What width and length is the Instant Lead Lines roll?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The roll is 36 feet long and 1\/8 inch wide, providing long continuous lines for multiple projects.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these lead lines on curved glass or bottles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the strips are flexible and can conform to gentle curves; apply slowly and smooth as you go for best adhesion.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delta Creative","offers":[{"title":"Default Title","offer_id":55249567056209,"sku":"B002WE5ALG","price":29.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/delta-creative-instant-lead-lines-roll-front.jpg?v=1791636666"},{"product_id":"camatet-lead-came-for-stained-glass-12-ft-2-6-ft-5-64-u-channel-flexible-pre-rolled-for-repairs-hobby-panels","title":"CAMATET Lead Came for Stained Glass 12 ft (2×6 ft) 5\/64\" U-Channel — Flexible, Pre-Rolled for Repairs \u0026 Hobby Panels","description":"\u003cp\u003e\u003cstrong\u003eCAMATET 12 ft 5\/64\" U channel lead came is a pre-rolled lead strip kit designed to hold, shape, and reinforce stained glass panels for hobbyists and restorers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you build stained glass windows, repair vintage panels, or create sun catchers, choosing the right lead came matters. This CAMATET set supplies two pre-rolled 6 ft lengths (12 ft total) of 5\/64\" U-channel lead came packaged in a durable plastic box for tidy storage and easy transport. The came balances flexibility for bending around curves with enough rigidity to support glass edges, so you can assemble clean, long-lasting joints without struggling with brittle strips.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this lead came make assembly easier?\u003c\/h3\u003e\n\u003cp\u003eThe U-channel profile grips glass edges securely, letting you position pieces precisely before soldering. Its 5\/64\" channel width accommodates standard hobby glass thicknesses and reduces the need for constant adjustment during layout.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-rolled coils simplify handling and feeding along the panel.\u003c\/li\u003e\n  \u003cli\u003eFlexible alloy bends smoothly for curves and organic shapes.\u003c\/li\u003e\n  \u003cli\u003eConsistent channel depth holds pieces steady while you solder.\u003c\/li\u003e\n  \u003cli\u003eDurable surface resists cracking during routine cutting and shaping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and techniques work best with this came?\u003c\/h3\u003e\n\u003cp\u003eYou can cut and shape the CAMATET lead using standard lead knives, came shears, and grozing pliers. Gloves and good ventilation are recommended when soldering and trimming to maintain safe workshop practices.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse came shears for clean straight cuts and a lead knife for precise joints.\u003c\/li\u003e\n  \u003cli\u003eGrozing pliers help nibble small adjustments without deforming the channel.\u003c\/li\u003e\n  \u003cli\u003eSupport long pieces on a bench to keep edges straight during assembly.\u003c\/li\u003e\n  \u003cli\u003eStore unused rolls in the supplied plastic box to prevent kinks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this came for repairs and restoration?\u003c\/h3\u003e\n\u003cp\u003eYes — the CAMATET 5\/64\" U channel is suitable for restoration tasks where authentic-looking lead lines are needed. Its classic U profile and neutral finish blend with existing panels while adding structural reinforcement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace worn came in old windows without altering the visual style.\u003c\/li\u003e\n  \u003cli\u003eAdd new lead lines to stabilise weakened glass segments.\u003c\/li\u003e\n  \u003cli\u003eCut to exact lengths for tight-fitting repairs and re-solder joints.\u003c\/li\u003e\n  \u003cli\u003eUse in combination with reinforcing bars when restoring larger panels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the product details I should know before buying?\u003c\/h3\u003e\n\u003cp\u003eThis package contains two 6 ft pre-rolled lead came strips, each with a 5\/64\" U-shaped channel. The came is made to flex around curves yet remains robust for structural support, and arrives in a protective plastic box for neat storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTotal length: 12 ft (two 6 ft rolls).\u003c\/li\u003e\n  \u003cli\u003eChannel size: 5\/64\" U profile — suited for common hobby glass thicknesses.\u003c\/li\u003e\n  \u003cli\u003eMaterial: rust-resistant lead alloy made for stained glass use.\u003c\/li\u003e\n  \u003cli\u003ePackaging: reusable plastic box to keep came straight and clean.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Makers, hobbyists, and professionals who create or restore stained glass pieces and need reliable U-channel lead came that’s easy to cut, form, and store. Whether you’re assembling new panels, repairing a family heirloom, or crafting decorative glass art, the CAMATET lead came supplies the structure and finish that help projects look polished and last.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this lead came ready to use right out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it comes as two pre-rolled 6 ft lengths (12 ft total) and is ready for cutting, bending, and soldering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What glass thickness fits the 5\/64\" U channel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 5\/64\" channel suits common hobby stained glass thicknesses and standard panel assembly needs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CAMATET","offers":[{"title":"Default Title","offer_id":55250185683281,"sku":"B0DSJ9DNLV","price":30.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/camatet-front-packaging-lead-came.jpg?v=1791638013"},{"product_id":"edco-supply-corporation-silver-back-copper-foil-for-stained-glass-3-16-x-108-ft-dead-soft-strong-adhesive","title":"Edco Supply Corporation silver-back copper foil for stained glass 3\/16\" x 32.9 m — dead-soft, strong adhesive","description":"\u003cp\u003e\u003cstrong\u003eEdco 3\/16 inch silver‑back copper foil is a dead‑soft, silvered backing foil on a 108‑foot roll with an industry‑leading adhesive for secure, close seams in stained glass and metalwork.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis roll of Edco copper foil is designed for artists and hobbyists who need dependable foil that conforms to curves and holds solder seams cleanly. The foil is silver backed—ideal for projects where the soldered seams will remain visible or where light transmission through clear glass is important. Each roll measures 3\/16\" (approximately 4.8 mm) wide and 1.0 mm thick, giving a tactile feel that balances flexibility with structure.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this foil behave around tight curves and small shapes?\u003c\/h3\u003e\n\u003cp\u003eThe foil is manufactured from \"dead soft copper,\" which means it bends and compresses easily without springing back. That softness helps the foil lay flat and snug against irregular edges, reducing gaps before soldering and producing neater seams.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDead‑soft copper for smooth bending around curves and points\u003c\/li\u003e\n  \u003cli\u003e1.0 mm thickness gives consistent handling without tearing\u003c\/li\u003e\n  \u003cli\u003eStrong adhesive keeps foil in place during assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose silver‑back foil instead of plain copper back?\u003c\/h3\u003e\n\u003cp\u003eSilver backing preserves a lighter, reflective seam that complements transparent or pale glass and matches projects where you prefer a silver solder finish. It also minimizes the visible copper tone should any foil edges remain exposed after finishing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilver backing keeps final seams brighter and more reflective\u003c\/li\u003e\n  \u003cli\u003ePreferred for clear glass or silver‑coloured solder finishes\u003c\/li\u003e\n  \u003cli\u003eReduces warm copper tones on exposed edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the adhesive and will it hold during soldering?\u003c\/h3\u003e\n\u003cp\u003eEdco's adhesive is rated among the strongest used for stained glass foils, formulated to maintain contact through handling and assembly. It resists lifting so pieces remain aligned while you tack and solder, improving workflow and final strength.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustry‑leading adhesive reduces slippage during assembly\u003c\/li\u003e\n  \u003cli\u003eMaintains adhesion on small or narrow pieces\u003c\/li\u003e\n  \u003cli\u003eHelps produce stronger finished seams once soldered\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size and quantity does this roll provide for projects?\u003c\/h3\u003e\n\u003cp\u003eThe product comes on a long continuous roll—108 feet total—so you can complete multiple panels or many small pieces without frequent roll changes. The 3\/16\" width is a common, versatile size for standard stained glass projects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/16\" (approx. 4.8 mm) width fits typical glass seams\u003c\/li\u003e\n  \u003cli\u003e1.0 mm thickness for consistent wrapping and soldering\u003c\/li\u003e\n  \u003cli\u003e108 feet (36 yards) per roll for extended use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Artists, stained glass hobbyists, educators, and small studios that need a reliable, easy‑to‑handle foil for projects where seam appearance matters. If you assemble panels with curves, small shapes, or clear glass and prefer silver‑looking solder seams, this Edco silver‑back copper foil gives the flexibility, adhesion, and roll length to keep your workflow efficient and your finished pieces clean and consistent.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this foil suitable for curved stained glass pieces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The dead‑soft copper bends easily for tight curves and small shapes without springback.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this when I want silver‑coloured solder seams?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The silver backing keeps seams looking brighter and pairs well with silver solder finishes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edco Supply Corporation","offers":[{"title":"Default Title","offer_id":55250532368721,"sku":"B00NY69O6S","price":30.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/edco-silver-back-foil-front-roll.jpg?v=1791638988"},{"product_id":"rainbow-art-glass-novacan-old-masters-zinc-flux-for-stained-glass-8-oz-water-cleanupable","title":"Rainbow Art Glass Novacan Old Masters Zinc Flux for Stained Glass - 237 ml, Water-Cleanupable","description":"\u003cp\u003e\u003cstrong\u003eNovacan Old Masters zinc flux is an all-purpose soldering flux formulated for stained glass, metal caming and copper-foil work, packaged in an easy-to-use 8 oz bottle.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you build stained glass panels, repair leaded windows, or work with copper foil, the right flux makes solder adhere cleanly and reduces fuss during cleanup. Rainbow Art Glass Novacan Old Masters flux is a zinc-based formula designed for a wide range of stained glass soldering tasks. It is water-cleanupable and supplied with an instructional label that lists usage tips and safety information.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this flux improve solder bonds on stained glass projects?\u003c\/h3\u003e\n\n\u003cp\u003eThis zinc flux prepares metal surfaces by removing light oxidation and promoting solder flow for stronger, more consistent joints. It helps the solder wet the metal evenly, reducing gaps and cold joints when applied correctly. Using a quality flux can shorten soldering time and produce a cleaner finished appearance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePromotes even solder wetting on lead, zinc and copper foil\u003c\/li\u003e\n  \u003cli\u003eReduces formation of cold joints and voids\u003c\/li\u003e\n  \u003cli\u003eImproves solder flow for smoother seams and less rework\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use Novacan Old Masters flux for lead came, zinc, and copper foil?\u003c\/h3\u003e\n\n\u003cp\u003eYes — this product is formulated for multiple stained glass methods, including lead came, zinc channel, and the copper-foil technique. Its zinc-based chemistry makes it versatile across these metals while maintaining performance consistency. Always follow proper soldering practice and surface preparation for best results.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with lead came and zinc framing systems\u003c\/li\u003e\n  \u003cli\u003eWorks with copper-foil seams on panel pieces\u003c\/li\u003e\n  \u003cli\u003eSuitable for a variety of stained glass metals and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the best way to apply and clean up this flux?\u003c\/h3\u003e\n\n\u003cp\u003eApply a thin, even coat of flux where soldering is required using a brush or applicator; avoid excess to minimize residue. After soldering, let the piece cool briefly and then remove flux residue with water and a soft brush or cloth. Refer to the label for full safety and handling instructions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrush or swab a light, consistent layer onto metal seams\u003c\/li\u003e\n  \u003cli\u003eSolder immediately while flux is active for optimal wetting\u003c\/li\u003e\n  \u003cli\u003eCleanup with water and mild scrubbing—no harsh solvents required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there safety or handling notes I should know?\u003c\/h3\u003e\n\n\u003cp\u003eTreat Novacan Old Masters flux like other soldering chemicals: work in a well-ventilated area, avoid skin contact, and keep away from children and pets. The bottle label includes warnings and disposal advice specific to the product. Use personal protective equipment like safety glasses and gloves when soldering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse with adequate ventilation to avoid fumes buildup\u003c\/li\u003e\n  \u003cli\u003eAvoid prolonged skin contact; wash exposed areas after use\u003c\/li\u003e\n  \u003cli\u003eStore tightly capped and upright in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? Novacan Old Masters zinc flux is aimed at hobbyists, studio artists and professional glaziers who need a reliable, multipurpose flux for stained glass assembly and repair. If you solder lead came, zinc framing, or copper-foil panels and want an easy-clean, 8 oz option from a trusted glass-supply brand, this flux is designed for your workshop.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this flux suitable for copper-foil stained glass?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It works with copper foil, promoting solder flow and cleaner seams when applied properly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I remove flux residue after soldering?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Let the piece cool, then clean with water and a soft brush or cloth; avoid harsh solvents.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rainbow Art Glass","offers":[{"title":"Default Title","offer_id":55250819645777,"sku":"B0CQTPCVRB","price":23.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/rainbow-art-glass-novacan-old-masters-front.jpg?v=1791640320"},{"product_id":"edco-copper-foil-for-stained-glass-7-32-dead-soft-high-tack-adhesive","title":"Edco Copper Foil for Stained Glass 7\/32\" — Dead-Soft, High-Tack Adhesive","description":"\u003cp\u003e\u003cstrong\u003eEdco 7\/32 Copper Foil is a dead‑soft, high‑adhesion copper foil tape designed for stained glass that keeps its stickiness and resists common studio chemicals for reliable long‑term performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're wrapping lamp shades, soldering panels, or finishing beveled glass, the right foil makes the project smoother and the results cleaner. Edco's 7\/32 copper foil combines a soft, conforming copper belly with an industry‑leading adhesive formula and long shelf life, so you spend less time fussing with fit and more time creating. The foil is engineered specifically for stained glass work and formulated to tolerate the fluxes and cleaners typically used in the craft.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Edco 7\/32 Copper Foil make assembly faster?\u003c\/h3\u003e\n\u003cp\u003eBecause the copper is \"dead soft,\" it conforms tightly to curves and irregular edges without springing back, reducing the need for trimming or rewrapping. The strong adhesive holds consistently as you position pieces, preventing lift‑ups that slow assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDead‑soft copper for snug wrap and fewer adjustments\u003c\/li\u003e\n  \u003cli\u003eHigh‑tack adhesive that grips immediately\u003c\/li\u003e\n  \u003cli\u003eConsistent width (7\/32\") for predictable seams and solder joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this foil stand up to the chemicals I use in the studio?\u003c\/h3\u003e\n\u003cp\u003eEdco formulates its copper foil to resist the chemicals commonly used with stained glass — including typical fluxes and cleaning agents — so the backing and adhesion are not compromised during finishing. That means fewer worries about adhesive breakdown or discoloration while you work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChemical‑resistant adhesive suitable for standard fluxes and cleaners\u003c\/li\u003e\n  \u003cli\u003eMetal formulation minimizes reaction or tarnish during handling\u003c\/li\u003e\n  \u003cli\u003eStable performance during soldering and cleaning steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will the adhesive and foil stay usable in storage?\u003c\/h3\u003e\n\u003cp\u003eEdco copper foil is manufactured for extended shelf life, maintaining tack and pliability even after months or a year in storage. Properly sealed and stored, you can expect the roll to perform nearly as well as the day you opened it.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLong‑lasting adhesive life for infrequent users\u003c\/li\u003e\n  \u003cli\u003eMaintains dead‑soft malleability over time\u003c\/li\u003e\n  \u003cli\u003eStore in a cool, dry place to maximize longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the 7\/32\" width useful for stained glass projects?\u003c\/h3\u003e\n\u003cp\u003eThe 7\/32\" (approx. 5.6 mm) width provides a balanced seam size that works well for both lampwork and flat panels where visible solder lines are desired without overwhelming the design. It gives good coverage for beveled edges and smaller detail pieces while keeping solder flow predictable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVersatile width suitable for many lamp shades and panels\u003c\/li\u003e\n  \u003cli\u003eProvides ample copper for secure solder bonding\u003c\/li\u003e\n  \u003cli\u003eWorks well with both delicate and medium‑scale glass pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Edco 7\/32 Copper Foil is aimed at stained glass hobbyists and professionals who want a reliable, easy‑to‑work foil that conforms to shapes, resists studio chemicals, and keeps its adhesive strength over time. It's a solid choice for anyone doing lampwork, leaded panel repairs, bevel setting, or decorative soldering where consistent seams and long shelf life matter.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFeatures: 7\/32 copper foil, Edco\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Edco copper foil compatible with common solder fluxes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Edco foil is formulated to resist typical stained‑glass fluxes and cleaners without losing adhesion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How wide is 7\/32\" in millimeters and what projects suit it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: 7\/32\" is about 5.6 mm, a versatile width for lamp shades, bevels, and medium‑detail panels.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edco","offers":[{"title":"Default Title","offer_id":55251225215313,"sku":"B004UZYX1S","price":30.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/edco-7-32-copper-foil-roll-front.jpg?v=1791642528"},{"product_id":"kraftex-copper-foil-tape-4-pack-3-16-1-4-5-16-3-8-in-55-ft-with-conductive-adhesive-for-stained-glass-emi-shielding","title":"Kraftex Copper Foil Tape 4-Pack — 3\/16, 1\/4, 5\/16, 3\/8 in × 16.8 m with Conductive Adhesive for Stained Glass \u0026 EMI Shielding","description":"\u003cp\u003e\u003cstrong\u003eKraftex Copper Tape 4-pack supplies four different-width conductive foil rolls (3\/16\", 1\/4\", 5\/16\", 3\/8\" × 55 ft) for stained glass soldering, EMI shielding, electronics repairs, jewellery and craft projects.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis set offers a range of narrow copper strips with a conductive adhesive backing, so you get precise edging for stained glass, reliable grounding for shielding tasks, and a flexible material for countless creative uses. The combination of multiple widths and long roll length means fewer interruptions during work and the ability to pick the ideal strip width for fine detail or broader coverage.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this copper tape help when I’m soldering stained glass?\u003c\/h3\u003e\n\u003cp\u003eThe foil wraps cleanly around glass edges and the conductive adhesive bonds the copper to the glass, allowing solder to wet and adhere along the perimeter for smooth seams. Different widths let you match the foil to the thickness of your glass and desired line width.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConductive adhesive ensures proper solder flow and adhesion.\u003c\/li\u003e\n  \u003cli\u003eMultiple widths let you choose narrow or broad foil for design control.\u003c\/li\u003e\n  \u003cli\u003eLong 55 ft rolls reduce roll changes during larger panels.\u003c\/li\u003e\n  \u003cli\u003eClean copper surface for consistent solder bead appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this tape reduce hum and interference in guitars or electronics?\u003c\/h3\u003e\n\u003cp\u003eThe copper foil acts as an electrical shield when applied inside control cavities or around pickups, creating a conductive path to ground that lowers electromagnetic interference. Properly applied and grounded, it helps reduce noise without affecting the instrument’s tone.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse inside control cavities, pickup routes, and cavities for shielding.\u003c\/li\u003e\n  \u003cli\u003eOverlap seams or use solder to create continuous ground paths.\u003c\/li\u003e\n  \u003cli\u003eDifferent widths allow neat coverage in tight spaces or broad cavity lining.\u003c\/li\u003e\n  \u003cli\u003eFlexible foil conforms to curves and irregular surfaces for full contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these rolls suitable for electronics, Faraday projects, and repairs?\u003c\/h3\u003e\n\u003cp\u003eYes — the conductive adhesive and copper surface provide a dependable path for grounding and signal routing in many small electronics and hobbyist Faraday cages. The tape is also handy for bridging repairs, traces, and creating custom conductive paths.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh conductive adhesive supports electrical continuity for circuits.\u003c\/li\u003e\n  \u003cli\u003eCuttable strips allow custom widths for trace repairs and routing.\u003c\/li\u003e\n  \u003cli\u003eFlexible and conformable for irregular component layouts.\u003c\/li\u003e\n  \u003cli\u003eLong length provides material for multiple projects or prototypes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can crafters and makers use these copper strips beyond technical work?\u003c\/h3\u003e\n\u003cp\u003eBeyond functional uses, the copper foil is a versatile crafting material for jewellery accents, mixed-media art, scrapbooking trim, and decorative edging. Its warm metallic finish adds a handcrafted aesthetic while remaining easy to cut and shape.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse as decorative tape for borders, inlays, and handmade cards.\u003c\/li\u003e\n  \u003cli\u003eCreate jewellery accents, wire wraps, or metallic highlights in mixed media.\u003c\/li\u003e\n  \u003cli\u003eAdheres to paper, glass, and many craft substrates for layered projects.\u003c\/li\u003e\n  \u003cli\u003eMultiple widths support fine detailing or broader decorative bands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Makers who need both function and flexibility — stained glass artists wanting neat solder edges, guitar techs and hobbyists seeking improved shielding, electronics tinkerers building or repairing small projects, and crafters looking for a versatile metallic tape. The four-roll assortment gives immediate access to multiple widths so you can match the tape to each task without guessing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I solder directly to this copper tape?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The conductive adhesive and copper surface allow solder to wet and adhere for stained glass seams and electrical joints.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this tape stick to curved or uneven surfaces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The foil is flexible and conforms to curves and irregular surfaces for reliable contact and coverage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Kraftex","offers":[{"title":"Default Title","offer_id":55252822786385,"sku":"B0G26F1PVT","price":30.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/kraftex-copper-tape-front-packaging.jpg?v=1791653608"},{"product_id":"studio-pro-silver-lined-copper-foil-tape-7-32-in-x-36-yd-solder-ready-with-dispenser","title":"Studio Pro Silver-Lined Copper Foil Tape 7\/32 in x 32.9 m — Solder-Ready with Dispenser","description":"\u003cp\u003e\u003cstrong\u003eStudio Pro 7\/32\" silver-lined copper foil tape is a 36-yard roll of solder-ready foil that combines a silver core for a clean solder finish with a tacky backing and a built-in dispenser for tidy, easy application.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis foil tape is designed specifically for stained-glass and mirror work where a consistent, attractive solder line matters. The silver-lined construction gives solder a matching appearance while the pressure-sensitive adhesive holds pieces firmly during assembly. The convenient plastic dispenser reduces tangling and keeps the roll orderly between uses.\u003c\/p\u003e\n\n\u003ch3\u003eHow does silver-lined copper foil improve my solder lines?\u003c\/h3\u003e\n\u003cp\u003eThe internal silver layer in this copper foil reflects the look of solder, producing a neater, less contrasting seam compared with plain copper core foils. It provides a smooth edge for the solder to adhere to, helping create consistent beads along glass joins.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilver core masks solder colour for a uniform finish.\u003c\/li\u003e\n  \u003cli\u003eEven foil edges help form smoother solder beads.\u003c\/li\u003e\n  \u003cli\u003eAdhesive backing keeps pieces aligned while soldering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply the foil for best results?\u003c\/h3\u003e\n\u003cp\u003eClean and dry glass edges before applying foil, then press the adhesive side firmly so the foil wraps slightly over the edge. Burnish the foil flat with a fid or plastic tool to ensure full contact and remove air gaps before soldering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a glass cleaner, then dry thoroughly.\u003c\/li\u003e\n  \u003cli\u003eUnwind foil from the dispenser and centre along the edge.\u003c\/li\u003e\n  \u003cli\u003eBurnish with a fid or silicone tool to secure adhesive contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat types of glass and projects is this foil suitable for?\u003c\/h3\u003e\n\u003cp\u003eStudio Pro silver-lined copper foil is ideal for clear and non-opalescent glass and mirrors used in stained-glass panels, lamp shades, and decorative accents. It works well on both straight and curved edges and is suited to beginner and advanced techniques where a clean solder aesthetic is desired.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBest for transparent or non-opalescent glass and mirrors.\u003c\/li\u003e\n  \u003cli\u003eCommonly used in panels, beveled assemblies, and lamps.\u003c\/li\u003e\n  \u003cli\u003eAppropriate for hobbyist and professional stained-glass work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the tape dimensions and durability characteristics?\u003c\/h3\u003e\n\u003cp\u003eThe tape measures a standard 7\/32\" width (about 1.0 mm thickness) and comes on a 36-yard roll—ample length for multiple projects. The adhesive and copper construction resist typical shop temperature changes and light weathering, helping pieces stay stable during assembly and soldering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWidth: 7\/32\"—a standard size for most stained-glass pieces.\u003c\/li\u003e\n  \u003cli\u003eThickness: approximately 1.0 mm for reliable handling.\u003c\/li\u003e\n  \u003cli\u003eRoll length: 36 yards for extended project use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: makers, hobbyists, and professional glassworkers seeking a dependable, easy-to-use foil that yields a cleaner solder appearance. If you need a standard-width, silver-lined foil with strong tack, a handy dispenser, and long roll length for repeated projects, this Studio Pro tape is built for those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this foil suitable for mirror edges?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The silver-lined core matches solder colour and works well on mirror edges when used with clear, non-opalescent glass.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much foil is on the roll?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The roll contains 36 yards of 7\/32\" silver-lined copper foil, enough for multiple medium-sized projects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Studio Pro","offers":[{"title":"Default Title","offer_id":55253573599569,"sku":"B004BN7ZUA","price":31.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/studio-pro-foil-front-packaging.jpg?v=1791660617"},{"product_id":"studio-pro-copper-foil-7-32-inch-36-yd-dispenser-tape-for-stained-glass-heat-and-weather-resistant","title":"Studio Pro Copper Foil 7\/32-inch — 32.9 m dispenser tape for stained glass, heat- and weather-resistant","description":"\u003cp\u003e\u003cstrong\u003eStudio Pro 7\/32-inch copper foil is a 36-yard, easy-pull dispenser tape designed to give dependable tack and weather-resistant edges for stained glass soldering and repairs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for stained glass artists, hobbyists and professional restorers, this copper foil provides a consistent backing for solder beads and a secure bond to glass edges and corners. The foil’s strong tack holds pieces during assembly while its resistance to temperature and outdoor conditions helps preserve joins over time. Packaged in a convenient plastic dispenser, the roll makes cutting and applying foil faster and cleaner so you can focus on design and soldering technique.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this copper foil improve solder joints?\u003c\/h3\u003e\n\u003cp\u003eThe copper foil creates a uniform surface that encourages smooth, even solder beads and reduces gaps along seams. Its consistent width and adhesive backing keep glass pieces aligned while you tack and solder, producing neater joints and fewer cold spots.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e7\/32-inch width ensures a balanced solder bead profile for most stained-glass seams\u003c\/li\u003e\n  \u003cli\u003eStrong adhesive maintains alignment through soldering and handling\u003c\/li\u003e\n  \u003cli\u003eUniform foil edge helps form continuous solder flow with less rework\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this foil stand up to heat and outdoor conditions?\u003c\/h3\u003e\n\u003cp\u003eStudio Pro copper foil is formulated for notable resistance to temperature changes and weathering, reducing the likelihood of adhesive breakdown or corrosion over time. While it’s designed to perform well in typical stained-glass projects, final durability depends on soldering quality and protective finishes applied afterward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTemperature-resistant copper foil for stable results during soldering\u003c\/li\u003e\n  \u003cli\u003eWeather-resistant adhesive and foil minimize degradation in shaded outdoor displays\u003c\/li\u003e\n  \u003cli\u003eCombines well with proper solder and finishing techniques for longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the dispenser help with application and storage?\u003c\/h3\u003e\n\u003cp\u003eThe unique easy-pull plastic dispenser keeps the roll tidy and speeds up single-handed application, cutting down on adhesive contact and misfeeds. It also protects the remaining foil from dirt and kinks when stored between projects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEasy-pull mechanism reduces tangling and waste during application\u003c\/li\u003e\n  \u003cli\u003ePlastic dispenser shields unused foil from dust and creasing\u003c\/li\u003e\n  \u003cli\u003eCompact design fits most workbenches and craft boxes for neat storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much foil do I get and what projects is it suited for?\u003c\/h3\u003e\n\u003cp\u003eThe roll contains 36 yards of 7\/32-inch copper foil, a length that suits multiple panels, window repairs, or frequent hobby use without frequent reordering. The 7\/32-inch width is a popular middle-ground for both detailed patterns and larger seams, making it versatile for stained glass, lamp repair, and decorative fused glass edging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e36-yard roll reduces interruptions for medium and larger projects\u003c\/li\u003e\n  \u003cli\u003e7\/32-inch width fits both detailed and broader solder lines\u003c\/li\u003e\n  \u003cli\u003eGood for patch repairs, full panels, lampshades, and small commercial jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Studio Pro 7\/32-inch copper foil is intended for stained glass artists, hobbyists, and professional restorers who need a reliable adhesive-backed foil that balances ease of use with temperature and weather resistance. If you want a consistent width, strong tack, and the convenience of an easy-pull dispenser for repeated projects, this 36-yard roll is a practical, workshop-ready choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this copper foil suitable for outdoor stained-glass panels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it offers enhanced resistance to temperature and weathering, but final durability also depends on solder quality and protective finishes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this foil on lamp shades and small repairs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Absolutely — the 7\/32-inch width and 36-yard length work well for lamps, patches, and repeated hobby projects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Studio Pro","offers":[{"title":"Default Title","offer_id":55253630222673,"sku":"B004BN80D6","price":31.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/studio-pro-copper-foil-front-packaging.jpg?v=1791661767"},{"product_id":"studio-pro-7-32-inch-black-lined-copper-foil-tape-36-yd-roll-adhesive-backed-for-stained-glass-mirrors","title":"Studio Pro 7\/32-Inch Black-Lined Copper Foil Tape — 32.9 m Roll, Adhesive-Backed for Stained Glass \u0026 Mirrors","description":"\u003cstrong\u003eStudio Pro 7\/32-inch black-lined copper foil is a 36-yard roll of adhesive-backed copper tape engineered to give stained glass and mirror edges a consistent, concealed seam ready for reliable soldering.\u003c\/strong\u003e\n\n\u003cp\u003eThis premium foil combines a built-in black lining with a strong adhesive and weather-resistant backing so you can wrap glass and mirror edges for a clean, uniform solder bead. The easy-pull plastic dispenser keeps the roll tidy and makes application faster, while the black core minimizes the visibility of the foil once soldered. Use it on clear, non-opalescent glass and mirror projects where a discreet, professional finish is important.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the black lining improve finished stained-glass panels?\u003c\/h3\u003e\n\u003cp\u003eThe internal black core in this copper foil conceals the metal edge beneath solder and patina, giving panels a crisper, less metallic look. This is especially helpful when the goal is to de-emphasize foil lines or when working with clear glass and mirror that would otherwise show bright metal edges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlack core masks copper shine for subtler seams\u003c\/li\u003e\n  \u003cli\u003eHelps achieve consistent appearance across multiple pieces\u003c\/li\u003e\n  \u003cli\u003eWorks well when applying dark patinas over soldered seams\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this foil stick securely and handle temperature changes?\u003c\/h3\u003e\n\u003cp\u003eYes — Studio Pro foil features a high-tack adhesive and a foil formulation designed for strong adhesion to glass and mirror edges. The material resists temperature fluctuations and outdoor weathering, so solder beads stay smooth and joints remain steady during typical crafting and display conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOutstanding tack for a reliable bond to glass and mirror\u003c\/li\u003e\n  \u003cli\u003eEngineered to resist temperature shifts and weather exposure\u003c\/li\u003e\n  \u003cli\u003eMaintains adhesion through soldering heat without lifting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the dispenser make application easier?\u003c\/h3\u003e\n\u003cp\u003eThe roll is housed in a plastic dispenser that allows easy, controlled pulling and cutting of the foil. This reduces twisting or wrinkling during application and keeps the remainder of the roll protected from dust and damage between sessions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEasy-pull design prevents excess handling and tearing\u003c\/li\u003e\n  \u003cli\u003eSimple storage protects remaining foil from contaminants\u003c\/li\u003e\n  \u003cli\u003eSmoother feed reduces rework and speeds assembly time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size projects and glass types are best suited for this foil?\u003c\/h3\u003e\n\u003cp\u003eThe 7\/32-inch width is a versatile mid-size choice that fits most stained-glass seams and mirror edging needs. The product is formulated for clear and non-opalescent glass and mirror; avoid opalescent or textured glass where adhesion and coverage can vary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e7\/32-inch width for standard seam coverage and solder control\u003c\/li\u003e\n  \u003cli\u003e36-yard roll supplies ample length for multiple panels or large pieces\u003c\/li\u003e\n  \u003cli\u003eRecommended for clear, non-opalescent glass and mirrors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: studio artists, hobbyist stained-glass makers, restoration specialists, and mirror framers who want a dependable, discreet foil with strong adhesion and weather resistance. If you need a mid-width black-lined copper tape that delivers consistent soldering results and easy handling, this 36-yard Studio Pro roll is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this foil heat-resistant enough for soldering?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The foil is designed to hold through typical soldering temperatures without lifting and helps form a smooth solder bead.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this on opalescent or textured glass?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It’s intended for clear, non-opalescent glass and mirrors for best adhesion and appearance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Studio Pro","offers":[{"title":"Default Title","offer_id":55253652308305,"sku":"B000VGRVSC","price":31.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/studio-pro-front-packaging-foil.jpg?v=1791662095"},{"product_id":"sun-and-moon-stained-glass-1-8-round-h-lead-came-6-ft-length-5-32-channel-for-panels-lamps","title":"Sun and Moon Stained Glass 1\/8\" Round H Lead Came - 1.8 m Length, 5\/32\" Channel for Panels \u0026 Lamps","description":"\u003cp\u003e\u003cstrong\u003eSun and Moon Stained Glass 1\/8\" Round H lead came is a 6-foot length of round H-profile lead used to join and frame stained glass pieces with a 1\/8\" face and 5\/32\" channel.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis lead came is made for hobbyists and studio artists who need consistent, malleable H-profile came to hold glass pieces and create flowing lines in windows, lampwork, or panels. With a 1\/8\" face and a 5\/32\" channel width, the came balances neat sightlines and enough room to seat your glass edges securely. Its 6-foot length gives you long continuous runs for rails or borders, and the round H profile helps produce smooth, traditional joins with a softer edge than square H came.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and profile of this lead came?\u003c\/h3\u003e\n\u003cp\u003eThe product features a rounded H cross-section designed to accept glass into its channel while providing a visible 1\/8\" face. The channel width is 5\/32\", which fits common stained-glass thicknesses, and the overall depth is approximately 1\/16\". Each piece is sold as a 6-foot length suitable for making longer seams without many joints.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFace width: 1\/8\" for consistent sightline width\u003c\/li\u003e\n  \u003cli\u003eChannel width: 5\/32\" to accommodate standard glass thickness\u003c\/li\u003e\n  \u003cli\u003eProfile: round H for smoother edges and easier soldering\u003c\/li\u003e\n  \u003cli\u003eLength: 6 ft per piece for extended runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this lead came perform during cutting, fitting, and soldering?\u003c\/h3\u003e\n\u003cp\u003eThis came bends and cuts predictably with standard lead came tools and grozing pliers, making shaping corners and curves straightforward. The round H shape offers good seating for glass and tolerates slight glass thickness variations. It solders reliably at joints when prepped and fluxed correctly, producing stable seams for finished panels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEasily snipped and curved using lead knives or nippers\u003c\/li\u003e\n  \u003cli\u003eH profile provides secure seating for glass edges\u003c\/li\u003e\n  \u003cli\u003eSolders cleanly when properly fluxed and heated\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there safety or handling notes I should know?\u003c\/h3\u003e\n\u003cp\u003eLike all traditional lead products, handling lead came requires care: avoid ingestion and minimize skin contact, work in a ventilated area, and wash hands after use. Follow local regulations for storage and disposal. This product includes a California Proposition 65 warning about lead and related risks; refer to www.P65Warnings.ca.gov for details and proper precautions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse gloves and wash hands after handling\u003c\/li\u003e\n  \u003cli\u003eWork with good ventilation and avoid inhaling dust\u003c\/li\u003e\n  \u003cli\u003eDispose of scraps per local hazardous-waste guidelines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich project types are best suited for 1\/8\" round H lead came?\u003c\/h3\u003e\n\u003cp\u003eThis profile is ideal for stained-glass panels, small to medium windows, lamp shades, and decorative inserts where a moderate sightline is desired. Its channel width accommodates common glass thicknesses, and the round H styling complements both traditional and contemporary designs. Use multiple lengths for borders or longer structural seams in tabletop or sash projects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWindow panels and fixed decorative glazing\u003c\/li\u003e\n  \u003cli\u003eStained-glass lamps and shades with gentle curves\u003c\/li\u003e\n  \u003cli\u003eRepair work where matching a 1\/8\" face is needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Craftspeople, stained-glass students, and studio professionals who need a reliable, traditional lead came with a 1\/8\" face and a rounded H profile will find this product useful. It suits anyone building panels that require smooth joins, manageable sightlines, and runs long enough to minimize seams. Always follow safe-handling practices with lead materials and consult local rules for workplace safety and disposal.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eProduct specifics: 6 ft length; channel 5\/32\"; face 1\/8\"; depth approximately 1\/16\". WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/em\u003e\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What glass thickness fits the 5\/32\" channel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 5\/32\" channel fits standard stained-glass thicknesses up to about 3 mm to 5 mm comfortably.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I solder this round H lead came?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the round H came solders well when joints are fluxed and heated with proper soldering tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sun and Moon Stained Glass","offers":[{"title":"Default Title","offer_id":55253676523857,"sku":"B07CNLX7ML","price":32.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sun-and-moon-front-packaging-1-8-round-h-came.jpg?v=1791662506"},{"product_id":"nuonu-edco-copper-foil-for-stained-glass-1-4-6mm-silver-back-1-0-mil-36-yd-roll","title":"NUONU Edco Copper Foil for Stained Glass 1\/4\" (6mm) Silver-Back, 1.0 mil — 36 yd Roll","description":"\u003cp\u003e\u003cstrong\u003eNUONU Edco 1\/4\" Silver-Back Copper Foil is a 1.0 mil, 36-yard roll made for stained glass and soldering projects where a silver finish on seams or translucency is preferred.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Edco copper foil combines consistent width and thickness with a silver-backed adhesive designed for projects using transparent glass or when you want solder seams to appear silver. The 1\/4\" (6 mm) tape is a standard sizing that works well on small-to-medium glass pieces, and the 1.0 mil thickness gives a reliable wrap and solder bite while keeping edges neat. Sold as a single 36-yard pack, it suits hobbyists, studio artists, and small production runs seeking dependable tack and a clean final look.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this silver-back foil affect finished solder seams?\u003c\/h3\u003e\n\u003cp\u003eThe silver backing means exposed soldered seams will reflect a silver tone rather than copper, producing a cooler, more uniform finish when left visible or when using silver solder. It’s ideal when you want a less warm, less metallic-copper appearance at the joins.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilver backing creates silver-toned solder lines with standard solder.\u003c\/li\u003e\n  \u003cli\u003eWorks well with silver-based fluxes and solders for consistent colour.\u003c\/li\u003e\n  \u003cli\u003eBetter visual match for transparent glass and modern palettes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the 1.0 mil thickness and 1\/4\" width fit my stained-glass patterns?\u003c\/h3\u003e\n\u003cp\u003eThe 1.0 mil thickness balances pliability and strength, making wrapping curves and small pieces straightforward while giving enough solder adhesion. The 1\/4\" (6 mm) width is a common size for medium-detail work, fitting many classic patterns and lead-line replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.0 mil thickness for reliable solder adhesion without bulk.\u003c\/li\u003e\n  \u003cli\u003e1\/4\" width suitable for medium borders, small shapes, and intricate pieces.\u003c\/li\u003e\n  \u003cli\u003e36-yard length supports multiple projects or larger panels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the adhesive perform and how long is the roll?\u003c\/h3\u003e\n\u003cp\u003eEdco foil is known for outstanding tack that holds glass pieces securely during assembly and soldering, reducing slippage and the need for extra clamps. This pack contains one continuous 36-yard roll—ample material for numerous small projects or several larger pieces depending on pattern complexity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-tack adhesive prevents shifting during soldering and handling.\u003c\/li\u003e\n  \u003cli\u003e36 yards per roll gives extended usage for hobby and studio work.\u003c\/li\u003e\n  \u003cli\u003eConsistent backing and edge quality reduce fraying at cuts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat types of projects benefit most from this foil?\u003c\/h3\u003e\n\u003cp\u003eSilver-backed copper foil is especially useful when working with transparent glass, pieces where solder lines remain visible, or when a cooler metallic finish is desired. It supports both traditional stained glass and modern lampwork or fused glass assemblies where neat solder seams matter to the finished aesthetic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStained-glass panels with visible solder seams.\u003c\/li\u003e\n  \u003cli\u003eLight fixtures and sun-catchers using transparent glass.\u003c\/li\u003e\n  \u003cli\u003eRepair work where colour matching to silver is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Artists, hobbyists, and small studios that want a reliable, silver-backed copper foil for clean solder lines and transparent-glass projects. If you need a consistent 1\/4\" width with dependable tack and the appearance of silver on exposed seams, this Edco 1.0 mil, 36-yard roll from NUONU fits those needs without excess bulk or variable quality.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this foil suitable for curved and small glass pieces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 1.0 mil thickness is pliable enough for curves and small shapes while still providing good solder adhesion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long is the roll and what width is the tape?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The roll is 36 yards long and the foil is 1\/4\" (6 mm) wide, ideal for medium-detail stained-glass work.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"NUONU","offers":[{"title":"Default Title","offer_id":55253717909841,"sku":"B087YWYXFB","price":32.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/nuonu-edco-silver-back-foil-roll-front.jpg?v=1791663435"},{"product_id":"studio-pro-copper-foil-for-stained-glass-1-4-inch-36-yd-roll-high-tack-weather-resistant-dispenser","title":"Studio Pro copper foil for stained glass 1\/4-inch 32.9 m roll — high-tack weather-resistant dispenser","description":"\u003cp\u003e\u003cstrong\u003eStudio Pro 680 1\/4-Inch Copper Foil is a 36-yard roll of high-tack, weather-resistant copper foil in an easy-pull dispenser, engineered for secure, uniform solder beads on stained glass and similar projects.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis copper foil combines strong adhesion, temperature and weather resistance, and a convenient plastic dispenser to speed foil application and protect the roll between uses. The 1\/4-inch width is a common choice for many stained glass patterns and repair work; the 36-yard length gives you enough material for multiple projects without frequent reordering. Use it along glass edges and corners to build a smooth, consistent solder line that helps finished pieces look neat and hold up over time.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this foil perform when soldering stained glass?\u003c\/h3\u003e\n\u003cp\u003eThe Studio Pro copper foil is formulated for reliable tack so it stays in place while you solder. Its tackiness and uniform width support a consistent solder bead, reducing gaps and runs that can weaken seams or require rework.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-tack adhesive holds foil to glass edges during soldering.\u003c\/li\u003e\n  \u003cli\u003eConsistent 1\/4-inch width produces even solder lines.\u003c\/li\u003e\n  \u003cli\u003eFormulation resists temperature fluctuations during work.\u003c\/li\u003e\n  \u003cli\u003eHelps create smooth seams for cleaner finished appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the foil withstand outdoor exposure or temperature changes?\u003c\/h3\u003e\n\u003cp\u003eThis copper foil is designed with resistance to weathering and temperature in mind, so it remains stable in typical indoor and sheltered outdoor conditions. While no foil prevents all long-term corrosion indefinitely, its resistance improves longevity compared with low-grade alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to resist weather-related deterioration.\u003c\/li\u003e\n  \u003cli\u003eHolds adhesive and structure through normal temperature ranges.\u003c\/li\u003e\n  \u003cli\u003eSuitable for pieces that may face occasional outdoor exposure.\u003c\/li\u003e\n  \u003cli\u003eFor long-term outdoor installations, pair with appropriate sealants and lead came.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the dispenser convenient for studio work?\u003c\/h3\u003e\n\u003cp\u003eThe unique easy-pull plastic dispenser simplifies handling and storage: it lets you feed foil smoothly and keeps the remaining roll protected between sessions. This reduces tangles, finger fumbling, and accidental unspooling so you can maintain focus during cutting and assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlastic dispenser provides controlled, tangle-free dispensing.\u003c\/li\u003e\n  \u003cli\u003eProtects unused foil from dust and damage when stored.\u003c\/li\u003e\n  \u003cli\u003eSpeeds application with a steady pull mechanism.\u003c\/li\u003e\n  \u003cli\u003eCompact dispenser fits neatly on the workbench or in a toolbox.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much material do I get and which projects is 1\/4-inch best for?\u003c\/h3\u003e\n\u003cp\u003eThis product contains a 36-yard roll of 1\/4-inch-wide copper foil, enough for multiple medium-sized stained glass panels or many smaller repairs. The 1\/4-inch width is a versatile middle-ground, ideal for standard seams and common glass thicknesses used in decorative windows, lamps, and suncatchers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e36 yards per roll — suitable for several projects before restocking.\u003c\/li\u003e\n  \u003cli\u003e1\/4-inch width matches many traditional stained glass patterns.\u003c\/li\u003e\n  \u003cli\u003eGood for both new builds and repair work on existing pieces.\u003c\/li\u003e\n  \u003cli\u003ePairs well with standard soldering techniques for uniform beads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Studio Pro 680 1\/4-Inch Copper Foil is aimed at hobbyists and professional stained glass artists who want a dependable, easy-to-use foil for clean solder lines. It suits makers who need a balance of adhesion, weather resistance, and convenience—especially those producing decorative panels, lamps, or repair work where consistent solder beads and efficient workflow matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this foil suitable for outdoor stained glass?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — Studio Pro foil resists weathering and temperature changes, suitable for sheltered outdoor pieces; for long-term exposure add sealants or protective framing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many yards and what width is the roll?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The roll contains 36 yards of copper foil at a 1\/4-inch width, ideal for standard stained glass seams and multiple projects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Studio Pro","offers":[{"title":"Default Title","offer_id":55254420193617,"sku":"B0044SAWLQ","price":33.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/studio-pro-copper-foil-front-packaging_9f7996b2-f6c9-430a-b792-52919999738c.jpg?v=1791675674"},{"product_id":"studio-pro-silver-lined-copper-foil-1-4-inch-36-yd-adhesive-backed-roll-in-easy-pull-dispenser-for-clean-solder-beads","title":"Studio Pro silver-lined copper foil 1\/4-inch (32.9 m) — adhesive-backed roll in easy-pull dispenser for clean solder beads","description":"\u003cp\u003e\u003cstrong\u003eStudio Pro 1\/4-inch silver-lined copper foil is a 36-yard roll of adhesive-backed, silver-core copper foil supplied in an easy-pull dispenser for clean, consistent solder beads on clear glass and mirrors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for stained glass and mirror edging, this silver-lined copper foil blends a silver interior with a copper outer layer so soldered seams match the final solder finish. The adhesive backing provides reliable tack while the foil’s construction resists temperature and weathering during assembly and routine handling. Packaged in a plastic dispenser, the roll stays neat and the foil pulls smoothly for faster, more controlled application.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this foil improve soldering on glass projects?\u003c\/h3\u003e\n\u003cp\u003eThe silver core inside the copper foil helps the soldered seam appear consistent in colour with traditional solder finishes, producing a more unified final appearance. The foil's backing adhesive holds glass pieces firmly in place so solder flows into a smooth bead instead of shifting or leaving gaps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilver-lined centre matches common solder finishes.\u003c\/li\u003e\n  \u003cli\u003eStrong adhesive tack stabilises glass edges during soldering.\u003c\/li\u003e\n  \u003cli\u003eUniform width supports consistent bead formation along seams.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the silver-lined copper foil under normal conditions?\u003c\/h3\u003e\n\u003cp\u003eThis foil is formulated to resist temperature variation and normal weathering encountered in decorative glass projects, helping maintain adhesion and appearance over time. While designed for interior stained glass and mirror work, standard good practice—appropriate soldering techniques and sealing—will optimize longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to withstand soldering temperatures without losing tack.\u003c\/li\u003e\n  \u003cli\u003eResists typical environmental effects encountered indoors and in sheltered displays.\u003c\/li\u003e\n  \u003cli\u003eSilver-lined core prevents visible colour mismatch after soldering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the dispenser make application easier?\u003c\/h3\u003e\n\u003cp\u003eThe roll is housed in a purpose-built plastic dispenser that allows an easy, controlled pull of foil and protects the adhesive layer when not in use. The dispenser reduces twisting, tangling, and handling wear so you can maintain a steady workflow and minimize waste.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEasy-pull design feeds foil smoothly for continuous application.\u003c\/li\u003e\n  \u003cli\u003eProtective casing stores roll cleanly between uses.\u003c\/li\u003e\n  \u003cli\u003eReduces handling damage and adhesive contamination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat types of glass should I use with this foil?\u003c\/h3\u003e\n\u003cp\u003eUse this silver-lined copper foil with clear, non-opalescent glass and mirrors to achieve the best visual match with solder. Avoid opalescent or heavily textured glasses where the adhesive or silver lining may be less visible or unnecessary for the finished aesthetic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for clear sheet glass and mirror edging.\u003c\/li\u003e\n  \u003cli\u003eNot recommended for opalescent glass where colour blending differs.\u003c\/li\u003e\n  \u003cli\u003eWorks well on flat and lightly contoured pieces when properly prepared.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Studio Pro 1\/4-inch silver-lined copper foil is intended for hobbyists, stained-glass artists, and mirror framers who want a silver-core copper tape that tacks well, stays manageable during use, and produces neat solder lines. The 36-yard length and dispenser make it practical for both occasional repairs and regular studio work, while the silver lining helps achieve a professional-looking solder finish without extra surface treatment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I solder directly over this silver-lined foil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The foil is designed for direct soldering; its adhesive holds glass while solder bonds to the foil’s silver-lined core.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this foil suitable for mirrors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It works well on mirror edges and clear glass where a silver-toned solder appearance is desired.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Studio Pro","offers":[{"title":"Default Title","offer_id":55254427664721,"sku":"B004BNBRUO","price":33.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/studio-pro-silver-lined-copper-foil-packaging_jpg.jpg?v=1791675794"},{"product_id":"yezhet-copper-foil-tape-for-stained-glass-7-32-in-x-36-yd-2-rolls-silver-backed-thick-adhesive","title":"YEZHET Copper Foil Tape for Stained Glass — 7\/32 in x 32.9 m (2 Rolls), Silver-Backed Thick Adhesive","description":"\u003cp\u003e\u003cstrong\u003eYEZHET 7\/32-inch silver-backed copper foil tape is a dual-roll, 36-yard supply designed to wrap stained-glass edges and create a reliable conductive seam for soldering.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis copper foil set gives hobbyists and professional glassworkers a consistent, ready-to-use metal edge that sticks to glass quickly and holds up to handling and temperature changes. Each roll is 7\/32\" wide and combined they provide 36 yards of tape with a thicker-than-average adhesive layer that improves initial tack and long-term durability. The silver backing on the copper foil improves solderability and creates a neat finished look for lead-free or traditional soldering techniques.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this foil tape make stained-glass assembly easier?\u003c\/h3\u003e\n\u003cp\u003eThe tape wraps smoothly around glass edges, creating an even metallic band that solder adheres to without leaving gaps. Its stronger adhesive reduces rework and keeps pieces aligned during soldering. The silvered surface also helps create clean solder joints that look professional.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConsistent 7\/32\" width for common stained-glass seams\u003c\/li\u003e\n  \u003cli\u003eThicker adhesive for faster initial bonding\u003c\/li\u003e\n  \u003cli\u003eSilver backing for improved solder flow and finish\u003c\/li\u003e\n  \u003cli\u003eTwo rolls totaling 36 yards for larger projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this tape withstand heat and environmental exposure?\u003c\/h3\u003e\n\u003cp\u003eThe product is formulated to resist temperature changes and general weathering so finished pieces hold up in varied conditions. While not a structural sealant, the foil maintains adhesion through the heat of soldering and during normal indoor or sheltered outdoor display.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-resistant backing suitable for soldering temperatures\u003c\/li\u003e\n  \u003cli\u003eAdhesive designed for long shelf life and endurance\u003c\/li\u003e\n  \u003cli\u003eHolds shape and bond under typical workshop conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and quantities are included, and how long will it last?\u003c\/h3\u003e\n\u003cp\u003eEach bundle contains two rolls of 7\/32-inch-wide copper foil with a combined length of 36 yards—ample for multiple panels or several small projects. Proper storage in a dry place extends usable life of both the foil and adhesive without performance loss.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard 7\/32\" width works with most stained-glass patterns\u003c\/li\u003e\n  \u003cli\u003eTotal length: 36 yards (two rolls)\u003c\/li\u003e\n  \u003cli\u003eStore away from extreme heat and humidity for longest life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the tape for best results?\u003c\/h3\u003e\n\u003cp\u003eClean and dry glass edges before applying, then wrap the foil tightly and burnish the seam to eliminate air pockets. Solder directly to the silvered surface once fully adhered, and trim excess foil with a sharp knife for neat corners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrepare glass edges by removing dust and oils\u003c\/li\u003e\n  \u003cli\u003eApply foil centered over edges and press firmly to bond\u003c\/li\u003e\n  \u003cli\u003eBurnish edges for secure adhesion and smooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: YEZHET silver-backed copper foil tape is ideal for stained-glass artists, hobbyists, restoration technicians, and craft instructors who need a reliable, easy-to-apply metal seam for soldering and finishing glasswork. It suits both small decorative objects and larger panels where a consistent, solder-friendly foil matters.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this copper foil ready for soldering without extra prep?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The silver-backed surface is solder-ready once the foil is firmly adhered and burnished to the glass edge.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What storage keeps the adhesive effective longest?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Store rolls in a cool, dry place away from direct sunlight and extreme heat to preserve adhesive and shelf life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEZHET","offers":[{"title":"Default Title","offer_id":55254476357969,"sku":"B0CW974XN1","price":33.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/yezhet-front-packaging-2-rolls.jpg?v=1791677039"},{"product_id":"studio-pro-copper-foil-1-4-inch-black-lined-36-yd-strong-tack-weather-resistant-dispenser","title":"Studio Pro copper foil 1\/4-inch black-lined 32.9 m — strong tack, weather-resistant dispenser","description":"\u003cp\u003e\u003cstrong\u003eStudio Pro 1\/4-inch black lined copper foil is a 36-yard roll of copper foil with an internal black lining, formulated for strong tack, weather resistance, and a discreet dark core that minimizes visible seams on clear glass and mirrors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for stained-glass makers, mirror framers, and hobbyists, this black-lined copper foil provides consistent adhesion and durability for soldering edges and corners. The foil is supplied in an easy-pull plastic dispenser that keeps the roll neat and makes application faster and less fussy. Use it on clear or reflective glass where a dark core improves the finished look by hiding the bright copper edge under solder.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this black-lined copper foil perform during soldering?\u003c\/h3\u003e\n\u003cp\u003eThe foil is formulated with excellent tack so it stays in place when you prepare and assemble glass pieces, and its resistance to temperature and weathering helps the foil keep shape and adhesion through soldering and outdoor display. The black lining reduces the visibility of the copper beneath solder, giving a cleaner appearance on light or mirrored glass.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOutstanding initial tack holds glass while soldering\u003c\/li\u003e\n  \u003cli\u003eTemperature-resistant formulation minimizes lifting or bubbling\u003c\/li\u003e\n  \u003cli\u003eBlack core hides foil lines under solder and patina\u003c\/li\u003e\n  \u003cli\u003eWorks well for both indoor and outdoor pieces due to weather resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to apply and store the foil?\u003c\/h3\u003e\n\u003cp\u003eThe roll comes inside a purpose-built easy-pull plastic dispenser that lets you unwind foil without tangles and protects the remaining supply from dust and damage. That dispenser simplifies cutting and measuring, and helps keep edges clean for reliable solder joints.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlastic dispenser enables smooth, tangle-free dispensing\u003c\/li\u003e\n  \u003cli\u003ePull-and-tear application reduces wasted foil\u003c\/li\u003e\n  \u003cli\u003eCompact storage protects the roll between sessions\u003c\/li\u003e\n  \u003cli\u003e36-yard length reduces the need for frequent replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich glass types and projects are best suited to this foil?\u003c\/h3\u003e\n\u003cp\u003eThis foil is intended for use on clear, non-opalescent glass and mirrors where the dark centre will visually recede under solder and patina, creating a neat, professional appearance. Avoid using on heavily textured or opalescent glass that may require different foiling characteristics for good adhesion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for clear sheet glass and mirrored panels\u003c\/li\u003e\n  \u003cli\u003eGood choice for lampwork accents, lead-free solder work, and decorative panels\u003c\/li\u003e\n  \u003cli\u003eNot recommended for opalescent or extremely textured glass surfaces\u003c\/li\u003e\n  \u003cli\u003e36 yards supports multiple medium-sized projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat specifications and features should I expect from the roll?\u003c\/h3\u003e\n\u003cp\u003eThe product is a 1\/4-inch (6 mm) wide copper foil with a black internal lining, supplied in a 36-yard roll. Expect consistent foil width and a formulation that balances tack with workability so you can wrap glass edges cleanly and create a uniform solder bead.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWidth: 1\/4 inch (approx. 6 mm)\u003c\/li\u003e\n  \u003cli\u003eLength: 36 yards per roll\u003c\/li\u003e\n  \u003cli\u003eBlack-lined core conceals foil under solder\u003c\/li\u003e\n  \u003cli\u003eEasy-pull plastic dispenser for neat handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: makers, stained-glass students, restoration technicians, and DIY decorators who need a reliable, dark-core copper foil for clean-looking solder joints on clear glass and mirrored projects. If you want a roll that stays tidy in storage, disperses easily during use, and helps reduce visible foil lines after soldering, this Studio Pro 1\/4-inch black lined copper foil is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this foil on mirrored glass?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The black-lined core is especially useful on mirrors, helping hide foil lines under solder for a neater finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long is each roll and what width is the foil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each roll contains 36 yards of 1\/4-inch (about 6 mm) black-lined copper foil.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Studio Pro","offers":[{"title":"Default Title","offer_id":55254588490065,"sku":"B004BNDZSG","price":33.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/studio-pro-black-lined-copper-foil-front-packaging.jpg?v=1791681231"},{"product_id":"edco-supply-corporation-silver-backed-copper-foil-7-32-108-ft-roll-1-0-mil-dead-soft-flexible-bright-solder-ready-finish","title":"Edco Supply Corporation silver-backed copper foil 7\/32\" 32.9 m roll, 1.0 mil dead-soft — flexible, bright solder-ready finish","description":"\u003cp\u003e\u003cstrong\u003eEdco's 7\/32\" silver-backed copper foil is a soft, high-adhesion foiling tape designed for stained glass and soldered seams, supplied on a 108-foot roll.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis silver-backed foil combines pliable copper with a heavy-duty adhesive so it conforms around curves and adheres firmly to glass edges, while the silver backing preserves a bright, solder-ready finish. It’s sized to fit medium-width seams commonly used in traditional stained-glass work, lampmaking and decorative lead-free projects. The roll format keeps a steady supply on hand for studio work or classroom use.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this foil behave when wrapping curved or irregular glass pieces?\u003c\/h3\u003e\n\n\u003cp\u003eThe foil is produced from dead-soft copper that stretches and folds without springing back, so it hugs contours cleanly. Its flexibility reduces puckering and makes tight-radius details neater, letting solder bind more evenly across joins.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDead-soft copper for easy shaping around curves and bevels\u003c\/li\u003e\n  \u003cli\u003eStrong adhesive keeps foil in place during handling and soldering\u003c\/li\u003e\n  \u003cli\u003eConsistent 7\/32\" width for predictable seam coverage\u003c\/li\u003e\n  \u003cli\u003eSuitable for both straight edges and organic shapes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the silver backing affect how seams look after soldering?\u003c\/h3\u003e\n\n\u003cp\u003eThe silver backing gives solder a bright, lighter-toned finish where you want seams to remain silver rather than taking on a copper hue. That makes this foil a good choice for projects showing transparent glass or designs where silver seams are part of the aesthetic.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSilver-backed surface for lighter solder appearance\u003c\/li\u003e\n  \u003cli\u003eWorks well when leaving seams exposed or minimally patinated\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard rosin-core and flux soldering methods\u003c\/li\u003e\n  \u003cli\u003eHelps maintain contrast on transparent and light-coloured glass\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and supply details I should plan for?\u003c\/h3\u003e\n\n\u003cp\u003eEach roll contains a long continuous length to minimize joins and interruptions on large panels. The tape width and specified thickness provide consistent coverage for medium seam widths used in many stained-glass patterns.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWidth: 7\/32\" (fits medium seam patterns and most lead replacement techniques)\u003c\/li\u003e\n  \u003cli\u003eThickness: 1.0 mil (thin, easy to fold and solder over)\u003c\/li\u003e\n  \u003cli\u003eLength: 108 feet per roll — ample for multiple projects\u003c\/li\u003e\n  \u003cli\u003eSold as a single continuous roll to reduce waste and seams\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use and store this foil for best results?\u003c\/h3\u003e\n\n\u003cp\u003eApply the foil centered over the glass edge and press firmly so the adhesive contacts glass along the entire length; burnish the edge to remove air pockets before soldering. Store the roll in a dry, cool place and keep it in its original packaging to avoid oxidation on the adhesive surface.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eApply with steady pressure and burnish for a flat seam\u003c\/li\u003e\n  \u003cli\u003eTrim excess foil carefully to avoid overlaps at corners\u003c\/li\u003e\n  \u003cli\u003eKeep roll sealed and dry to protect adhesive quality\u003c\/li\u003e\n  \u003cli\u003eUse standard flux and solder techniques compatible with silver-backed foil\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Artists, hobbyists and small studios working in stained glass, lamp construction, or decorative soldered metalwork who want a soft, easy-to-shape copper foil with a silver finish. This roll is especially useful for projects requiring consistent medium-width seams, brighter solder lines, and a long continuous supply for panel work or classroom practice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this foil suitable for lampwork and beveled glass?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — its dead-soft copper and 7\/32\" width make it easy to wrap bevels and lamp components while the strong adhesive holds during handling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I solder directly on the silver backing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the silver-backed surface produces a lighter solder appearance; use standard flux and solder techniques for best results.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edco Supply Corporation","offers":[{"title":"Default Title","offer_id":55254724804945,"sku":"B01MPYH5EQ","price":33.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/edco-front-packaging-foil.jpg?v=1791685147"},{"product_id":"artkingto-copper-foil-for-stained-glass-1-4-in-1-5-mil-2x36-yd-rolls-with-hand-foiler-silver-backed","title":"ARTKINGTO Copper Foil for Stained Glass 1\/4 in, 1.5 mil — 2x36 yd Rolls with Hand Foiler, Silver-Backed","description":"\u003cp\u003e\u003cstrong\u003eARTKINGTO 1\/4-inch silver-backed copper foil kit includes two 36-yard rolls of 1.5 mil tape plus a durable hand foiler for precise stained glass assembly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit is designed for hobbyists and artisans who build Tiffany-style stained glass windows, lamps, suncatchers, and mosaics. The silver backing improves solder adhesion and visibility during edging, while the 1.5 mil copper foil offers a balance of flexibility and tack. Two full rolls and a handheld foiler supply keep projects moving without frequent restocking.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes this copper foil kit a good choice for stained glass work?\u003c\/h3\u003e\n\u003cp\u003eThe combination of silver backing, 1.5 mil thickness, and two long rolls provides consistent, reliable tape for wrapping glass edges. The foil’s tack holds well during soldering and the silver layer aids in even solder flow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo 36-yard rolls reduce interruptions for large projects or multiple pieces.\u003c\/li\u003e\n  \u003cli\u003e1\/4-inch width fits standard glass edge profiles common in lamp and window work.\u003c\/li\u003e\n  \u003cli\u003e1.5 mil thickness balances pliability and durability for clean wraps.\u003c\/li\u003e\n  \u003cli\u003eSilver backing enhances solder bonding and makes seams easier to inspect.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the included hand foiler improve my workflow?\u003c\/h3\u003e\n\u003cp\u003eThe hand foiler speeds up consistent application of foil and keeps edges neat. Its stainless steel roller and injection-molded handle provide smooth pressure and controlled tension for uniform adhesion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eErgonomic plastic handle reduces hand fatigue during repetitive wrapping.\u003c\/li\u003e\n  \u003cli\u003eStainless roller ensures even pressure and long service life.\u003c\/li\u003e\n  \u003cli\u003eTool fits both rolls for quick feeding and precise placement.\u003c\/li\u003e\n  \u003cli\u003eManufactured with moulding, not 3D printing, for sturdier construction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich glass projects are best suited to this 1\/4-inch tape?\u003c\/h3\u003e\n\u003cp\u003eThis foil width and thickness are ideal for many stained glass techniques, such as lamp making, window panels, small ornaments, and mosaics. It performs well on both straight edges and gentle curves where a consistent wrap is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTiffany-style lamps and panels where uniform seams matter.\u003c\/li\u003e\n  \u003cli\u003eSuncatchers and small decorative pieces for hobbyists.\u003c\/li\u003e\n  \u003cli\u003eRepair or restoration tasks requiring matching foil width and finish.\u003c\/li\u003e\n  \u003cli\u003eEducational classroom kits and group craft sessions—the twin rolls cover multiple participants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and handle this copper foil to retain performance?\u003c\/h3\u003e\n\u003cp\u003eKeep rolls in a cool, dry place away from direct sunlight and sharp objects to prevent creasing or tarnish. Apply foil with steady pressure and trim overlaps neatly before soldering for the best outcome.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStore sealed or in protective sleeves to limit oxidation of exposed copper edges.\u003c\/li\u003e\n  \u003cli\u003eAvoid stretching the foil; maintain gentle, even tension during application.\u003c\/li\u003e\n  \u003cli\u003eTrim excess with fine scissors for clean joints prior to soldering.\u003c\/li\u003e\n  \u003cli\u003eIf silver backing shows fingerprints, wipe lightly with a clean cloth before soldering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ARTKINGTO’s 1\/4-inch silver-backed copper foil kit is aimed at stained glass hobbyists, small studio artists, craft instructors, and restoration specialists who need dependable tape and a quality hand foiler. The package accommodates single large projects or several smaller builds, delivering consistent adhesion, good solderability, and a robust tool that speeds up application.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this foil compatible with lead-free solder?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the silver-backed copper foil works with lead-free and leaded solders; ensure proper flux and soldering technique for best joints.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many projects will two 36-yard rolls cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Coverage varies by project size, but two 36-yard rolls typically suffice for several small panels or one to two medium lamp shades.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARTKINGTO","offers":[{"title":"Default Title","offer_id":55255032594769,"sku":"B0D7HVD2RM","price":38.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/artkingto-foil-front-packaging.jpg?v=1791696254"},{"product_id":"glassco-5-32-round-h-hobby-lead-came-for-stained-glass-12-ft-narrow-face-rounded-seams","title":"Glassco 5\/32\" Round H Hobby Lead Came for Stained Glass — 3.7 m Narrow Face, Rounded Seams","description":"\u003cp\u003e\u003cstrong\u003eGlassco 5\/32\" Round H Hobby Came is a 12-foot length of narrow-face lead came designed to give small stained-glass pieces strong, rounded seams and a professional finish.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you make suncatchers, night lights, small panels or detailed hobby pieces, the right came makes assembly, soldering and display much easier. This 5\/32\" Round H Hobby Came from Glassco combines a slim face profile with the structural support of lead came so small glass elements sit securely while maintaining elegant, smooth lines. It’s intended for hobbyists and artisans who need precise seams and a neat, finished appearance without bulk.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this came affect my finished seams and appearance?\u003c\/h3\u003e\n\u003cp\u003eThe round H profile creates smooth, rounded seams that visually soften junctions between glass pieces while keeping a clean edge. Because the face is narrow, it minimizes visual distraction and showcases the glass instead of the came. The rounded profile also helps solder to flow more predictably for neat beads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5\/32\" narrow face keeps seams slim and refined\u003c\/li\u003e\n  \u003cli\u003eRounded H profile yields smooth, finished seams\u003c\/li\u003e\n  \u003cli\u003eLead material supports solder adhesion and consistent beads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this came strong enough for small windows and suncatchers?\u003c\/h3\u003e\n\u003cp\u003eYes — the lead composition provides structural support appropriate for small panels, hanging suncatchers and decorative night lights. While it’s optimised for hobby-scale work, it delivers enough rigidity to hold glass securely when framed or suspended. For larger exterior windows, heavier reinforcement would be advisable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLead came offers durable support for small-sized projects\u003c\/li\u003e\n  \u003cli\u003e12-foot length supplies multiple small panels or many repeats\u003c\/li\u003e\n  \u003cli\u003eBest used in framed or hung applications for added stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this came make soldering easier for hobbyists?\u003c\/h3\u003e\n\u003cp\u003eThe profile and material are chosen to simplify soldering by giving predictable edges and a surface the solder wets cleanly. The rounded H shape helps guide solder along seams, reducing the need for excessive cleanup. Hobbyists report faster, tidier joints compared with bulkier came profiles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRounded edges encourage smooth solder flow\u003c\/li\u003e\n  \u003cli\u003eNarrow face reduces excess solder buildup\u003c\/li\u003e\n  \u003cli\u003eLeads to cleaner, quicker finishing touches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much came do I get and how should I plan usage?\u003c\/h3\u003e\n\u003cp\u003eThis product comes as a single 12-foot length of 5\/32\" Round H hobby came, which is practical for multiple small pieces or a single detailed panel. Measure your pattern carefully and allow waste for mitering and trimming; small projects generally stretch a single length across several suncatchers or decorative inserts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle 12-foot stick — plan cuts for miter joints\u003c\/li\u003e\n  \u003cli\u003eEstimate extra length for practice joints and mistakes\u003c\/li\u003e\n  \u003cli\u003ePairs well with small framings and simple reinforcement bars\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Glassco’s 5\/32\" Round H Hobby Came is intended for stained-glass hobbyists, craft makers and small-studio artists who build suncatchers, night lights, small framed panels and detailed decorative pieces. If you want a slim, rounded came that improves soldering consistency and highlights glasswork while providing dependable structural support, this came is a practical choice. For large architectural windows or exterior installations, consider heavier-gauge came and additional reinforcement.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What size is this Glassco came and how long is it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s a 5\/32\" (round H) lead came sold as a single 12-foot length, suitable for small stained-glass projects.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this came for outdoor windows?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s designed for hobby and small indoor pieces; for exterior or large windows, use heavier came and added reinforcement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Glassco","offers":[{"title":"Default Title","offer_id":55255045243217,"sku":"B0GFNNFZ7N","price":36.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/glassco-front-packaging-5-32-round-h-came.jpg?v=1791696383"},{"product_id":"glassco-1-8-flat-u-lead-came-for-stained-glass-12-ft-two-6-ft-rolls-5-32-channel-oxidation-resistant","title":"Glassco 1\/8\" Flat U Lead Came for Stained Glass — 3.7 m (two 1.8 m rolls), 5\/32\" Channel, Oxidation-Resistant","description":"\u003cp\u003e\u003cstrong\u003eGlassco 1\/8\" Flat U lead came is a 12-foot hobby-grade lead strip (two 6 ft rolls) designed to hold stained glass pieces securely with a 5\/32\" channel and a smooth, oxidation-resistant finish.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're repairing an old window, building a panel for a lamp, or assembling a new decorative piece, this Flat U lead came delivers the balance of flexibility and strength that hobbyists and artists rely on. The came is pre-rolled for safe transport, easy to handle when unspooled, and cast from a lead-tin-antimony alloy that minimizes white oxidation and dusting over time. With consistent dimensions and a clean surface, it's ready for cutting, shaping, and soldering without extra surface prep.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this came make cutting and shaping stained glass easier?\u003c\/h3\u003e\n\n\u003cp\u003eThe Glassco Flat U profile is purposely pliable so you can bend it around curves and corners without cracking while still keeping its shape under soldering heat. Its uniform 1\/8\" face and 5\/32\" channel mean repeatable fits for standard glass thicknesses, reducing the need for excessive trimming.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFlexible alloy composition for smooth bends around patterns and curves.\u003c\/li\u003e\n  \u003cli\u003eConsistent cross-section yields predictable lap and join fitting.\u003c\/li\u003e\n  \u003cli\u003eWorks well with a lead came stretcher and standard lead snips.\u003c\/li\u003e\n  \u003cli\u003ePre-rolled packaging prevents kinks and simplifies storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat finishing and soldering prep does this came require?\u003c\/h3\u003e\n\n\u003cp\u003eGlassco’s came arrives with a smooth, low-oxidation surface so you can often proceed straight to assembly and soldering. Minimal cleaning is typically needed; a quick wipe or gentle flux application readies joints for solder.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOxidation-resistant surface reduces time spent on surface prep.\u003c\/li\u003e\n  \u003cli\u003eCompatible with common fluxes and soldering techniques for stained glass.\u003c\/li\u003e\n  \u003cli\u003eTrim any irregular edges with a file for a neat joint before soldering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the product packaged and what lengths are included?\u003c\/h3\u003e\n\n\u003cp\u003eThe came is supplied as a total of 12 feet, rolled into two convenient 6-foot coils to prevent damage during shipping and to make unrolling straightforward at the bench. This packaging helps maintain straightness and keeps the came ready for immediate use when you prepare your layout.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTotal length: 12 ft, supplied as two 6 ft pre-rolled rolls.\u003c\/li\u003e\n  \u003cli\u003ePre-rolled coils reduce kinks and simplify storage between projects.\u003c\/li\u003e\n  \u003cli\u003eEach roll is sized for hobby and small-panel stained glass work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich glass thicknesses and designs work best with this Flat U came?\u003c\/h3\u003e\n\n\u003cp\u003eThe 5\/32\" internal channel and 1\/8\" face are optimised for commonly used stained glass thicknesses and smaller decorative pieces. It’s particularly suited to lamp shades, window inserts, and framed panels where consistent lead lines and secure seating are important.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIdeal for standard stained glass sheets and hobby-size pieces.\u003c\/li\u003e\n  \u003cli\u003eSuitable for curved or linear designs where pliability is needed.\u003c\/li\u003e\n  \u003cli\u003eWorks well in framed panels and lamp projects needing clean lead lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Glassco 1\/8\" Flat U lead came is made for stained glass hobbyists, craft artists, and home renovators who want a reliable, user-friendly came with predictable dimensions and a tidy finish. If you value ease of handling, consistent fit, and minimal surface preparation, this 12-foot hobby came provides an economical and practical supply for small to medium projects. Keep a lead stretcher and standard came snips on hand for best results, and enjoy faster assembly with less cleanup between soldering steps.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this lead came ready to solder right out of the roll?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The came has a smooth, low-oxidation surface and usually needs only a light wipe or flux before soldering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the total length and how is it packaged?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Total 12 feet supplied as two 6-foot pre-rolled coils to prevent kinks and simplify handling.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Glassco","offers":[{"title":"Default Title","offer_id":55255070507345,"sku":"B0FG4H5C6W","price":38.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/glassco-flat-u-front-packaging.jpg?v=1791696595"},{"product_id":"arikit-black-backed-copper-foil-3-16-dead-soft-foil-with-high-tack-adhesive-for-stained-glass","title":"Arikit Black-Backed Copper Foil 3\/16\" — Dead-Soft Foil with High-Tack Adhesive for Stained Glass","description":"\u003cp\u003e\u003cstrong\u003eArikit Edco 3\/16\" Black-Backed Copper Foil is a dead‑soft, black‑backed copper tape with an industry‑leading adhesive and long shelf life made for precise stained glass edging and foiling.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFor hobbyists and professionals who build stained glass panels, lamps, and leadless soldered work, the foil you choose determines how neatly the foil hugs the glass, how reliably it stays in place during soldering, and how long it keeps on the roll. Arikit’s Edco 3\/16\" Black Backed Copper Foil is formulated to stick strongly, conform closely to glass contours, and resist common chemicals used in glasswork so you can focus on assembly and finishing without re‑foiling or failure.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this copper foil make foiling faster and neater?\u003c\/h3\u003e\n\u003cp\u003eThe foil is made from dead‑soft copper, which bends and compresses easily so it forms a tight, uniform edge around cut glass. That close fit reduces gaps and prevents solder bridges, producing cleaner seams and fewer touch‑ups. The black backing provides consistent contrast to reveal coverage while you work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDead‑soft copper conforms to irregular edges for consistent seams.\u003c\/li\u003e\n  \u003cli\u003eBlack backing improves visual control when applying foil.\u003c\/li\u003e\n  \u003cli\u003e3\/16\" width suits medium‑scale glass pieces and common design borders.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the adhesive hold during soldering and storage?\u003c\/h3\u003e\n\u003cp\u003eYes — this Edco formulation uses an extra‑tacky adhesive designed to hold through handling, flux application, and heating. It also resists degradation over time, so unused rolls retain their stickiness after months of storage. That reliability saves time by reducing slips and rework during assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh‑tack adhesive resists lifting during handling and soldering.\u003c\/li\u003e\n  \u003cli\u003eLong shelf life prevents premature loss of stickiness.\u003c\/li\u003e\n  \u003cli\u003eConsistent adhesion across the roll for uniform application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this foil chemically compatible with stained glass work?\u003c\/h3\u003e\n\u003cp\u003eEdco foil is formulated to withstand the typical chemicals and fluxes used in stained glass finishing without breaking down or staining the copper. That durability means your foil maintains integrity while you clean, flux, and solder, helping produce a stable, attractive finished piece.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eResistant to common fluxes and cleaning solutions used in glasswork.\u003c\/li\u003e\n  \u003cli\u003eMaintains surface quality through routine finishing steps.\u003c\/li\u003e\n  \u003cli\u003eProduces reliable solder adhesion for durable seams.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size projects and techniques is 3\/16\" foil best for?\u003c\/h3\u003e\n\u003cp\u003eAt 3\/16\" (approx. 4.8 mm) this foil is a versatile mid‑width that suits many stained glass patterns, from small decorative elements to medium‑sized panel borders. It works well for lamp work, Tiffany‑style pieces, and repairs where balance between coverage and flexibility matters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for medium widths, borders, and larger leadless pieces.\u003c\/li\u003e\n  \u003cli\u003eGood choice for both hobbyists and studio artisans.\u003c\/li\u003e\n  \u003cli\u003eCompatible with typical soldering and finishing techniques.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Arikit Edco 3\/16\" Black‑Backed Copper Foil is made for stained glass makers who want a forgiving, easy‑to‑form foil with strong, long‑lasting adhesive. Whether you’re a weekend crafter or a studio professional building lamp shades or decorative panels, this foil reduces rework, holds up during finishing, and stores well so your supply remains ready when you are.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I solder directly over Arikit Edco copper foil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The foil is designed for soldering; its copper surface and adhesive hold through normal fluxing and heating used in stained glass work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long will an unopened roll keep its stickiness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Stored properly, the Edco foil retains adhesive strength for many months, remaining usable even a year after purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Arikit","offers":[{"title":"Default Title","offer_id":55255239328081,"sku":"B00359QVPG","price":37.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/arikit-edco-3-16-front-packaging.jpg?v=1791700883"},{"product_id":"artkingto-copper-foil-for-stained-glass-7-32-black-back-2-36yd-rolls-1-5-mil-with-hand-foiler","title":"ARTKINGTO Copper Foil for Stained Glass 7\/32\" Black-Back, 2×36yd Rolls 1.5 mil with Hand Foiler","description":"\u003cp\u003e\u003cstrong\u003eARTKINGTO 7\/32\" black-back copper foil kit includes two 36-yard rolls of 1.5 mil foil plus a plastic hand foiler with stainless steel roller for precise, durable stained-glass edging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit combines generous length, dependable thickness and a practical hand foiler so hobbyists and professional stained-glass makers can wrap glass edges quickly and consistently. The black-backed adhesive helps hide seams and gives finished pieces a classic look. Two rolls provide extended coverage for multiple projects, while the included hand foiler speeds up application and improves adhesion compared with hand-folding foil alone.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this copper foil improve stained-glass assembly?\u003c\/h3\u003e\n\u003cp\u003eThe 1.5 mil copper foil creates a stable, even surface for solder to bond to, helping seams hold together and appear clean. The black backing conceals the adhesive line and reduces visible gaps in finished panels. Consistent foil width and tack level keep pieces aligned while you solder.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.5 mil thickness for reliable solder adhesion and durability\u003c\/li\u003e\n  \u003cli\u003eBlack-backed adhesive hides seams and improves final aesthetics\u003c\/li\u003e\n  \u003cli\u003eTwo 36-yard rolls supply long projects or multiple small works\u003c\/li\u003e\n  \u003cli\u003eUniform 7\/32\" width ensures predictable wrap and fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat advantages does the included hand foiler add?\u003c\/h3\u003e\n\u003cp\u003eThe hand foiler speeds application and yields straighter, tighter foil edges than hand-wrapping without a tool. Its plastic body is lightweight and the stainless-steel roller helps press foil firmly to glass contours. Mould-injection construction ensures a sturdy, consistent tool body rather than fragile 3D-printed parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel roller provides smooth, even pressure\u003c\/li\u003e\n  \u003cli\u003eErgonomic plastic handle for comfortable repetitive use\u003c\/li\u003e\n  \u003cli\u003eMould-injection construction increases durability compared with thin or improvised foilers\u003c\/li\u003e\n  \u003cli\u003eReduces finger strain and speeds workflow on long panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much coverage and which sizes are included?\u003c\/h3\u003e\n\u003cp\u003eThis value kit includes two full rolls, each with 36 yards of foil, supplying ample material for large panels or many smaller pieces. The foil width is 7\/32\" (about 0.219\"), closely matching common 1\/4\" gauges so it works with most stained-glass patterns and came sizes. Two rolls let you reserve one for practice or backup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo rolls × 36 yards each for extended project coverage\u003c\/li\u003e\n  \u003cli\u003e7\/32\" width (approximately 0.219\") fits standard glass edges and patterns\u003c\/li\u003e\n  \u003cli\u003e1.5 mil thickness balances flexibility and solderability\u003c\/li\u003e\n  \u003cli\u003eBlack-backed adhesive for cleaner finished seams\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this foil suitable for hobbyists and professional use?\u003c\/h3\u003e\n\u003cp\u003eThe kit is built to serve both beginners learning copper-foil technique and experienced makers needing reliable supplies. Foil tack and thickness are selected to perform under repeated soldering, while the hand foiler improves speed and consistency—useful whether you’re producing one piece or several commissions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAppropriate for beginners practicing control and technique\u003c\/li\u003e\n  \u003cli\u003eDurable enough for commissioned works or gallery pieces\u003c\/li\u003e\n  \u003cli\u003eTwo rolls reduce downtime between projects\u003c\/li\u003e\n  \u003cli\u003eHand foiler improves repeatable quality across panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ARTKINGTO’s black-back copper foil and hand foiler kit suits stained-glass hobbyists, art students, and professional glassworkers who want dependable, ready-to-use materials. If you regularly wrap glass edges, assemble multi-panel projects, or need a starter kit that scales to larger work, this set delivers practical length, consistent thickness, and a hand tool to make application faster and neater.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What width and thickness is the copper foil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The foil is 7\/32\" wide (about 0.219\") and 1.5 mil thick, suited for standard stained-glass edges.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include a tool for applying the foil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — a plastic hand foiler with a stainless-steel roller is included to press foil smoothly to the glass.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARTKINGTO","offers":[{"title":"Default Title","offer_id":55255242768721,"sku":"B0D7HT7BMG","price":38.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/artkingto-front-packaging-foil-and-foiler.jpg?v=1791700994"},{"product_id":"gallery-glass-instant-lead-lines-72-ft-1-8-black-peel-and-stick-repositionable-redi-lead","title":"Gallery Glass Instant Lead Lines 72 ft 1\/8\" Black — Peel-and-Stick Repositionable Redi-Lead","description":"\u003cp\u003e\u003cstrong\u003eGallery Glass Instant Lead Lines are peel-and-stick faux lead strips that let you recreate stained-glass leading on glass, ceramics and more with no soldering.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis value pack delivers 72 linear feet of 1\/8\"-thick Redi-Lead in black, designed to simulate traditional stained-glass leading without the mess or tools. Peel the preformed lead strip, set it on a clean surface, and use Gallery Glass Liquid Leading or stained-glass paint to finish joints and panes. The lines are repositionable for up to four weeks, work on many smooth surfaces, and are made in the USA — a practical choice for hobbyists, decorators and craft instructors who want crisp, consistent leading every time.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I apply these lead lines to a project?\u003c\/h3\u003e\n\u003cp\u003eApplication is straightforward: clean the surface, peel the backing, and press the Redi-Lead into place following your design. You can form simple geometric shapes or trace a printed pattern; once positioned, finish seams with Liquid Leading to blend and secure the look.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSurface prep: remove dust and oils with rubbing alcohol for best adhesion.\u003c\/li\u003e\n  \u003cli\u003ePlacement: peel slowly and align to pattern, trimming with scissors if needed.\u003c\/li\u003e\n  \u003cli\u003eFinish: use Gallery Glass Liquid Leading to simulate soldered joints and seal lines.\u003c\/li\u003e\n  \u003cli\u003eRepositionable: can be lifted and adjusted for up to four weeks before losing tack.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and projects are these lead lines good for?\u003c\/h3\u003e\n\u003cp\u003eThe strips adhere best to smooth, non-porous surfaces such as glass, glazed ceramics and finished metal. They’re ideal for transforming picture frames, vases, jars, window panes and bottles with a stained-glass look without cutting or metalwork.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGlass frames, sun-catchers and decorative bottles.\u003c\/li\u003e\n  \u003cli\u003eCeramic tiles, mugs or glazed planters (test first).\u003c\/li\u003e\n  \u003cli\u003eUpcycled home décor: mirrors, jars and candle holders.\u003c\/li\u003e\n  \u003cli\u003eClassroom or group projects where safe, quick results matter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and permanent are the Instant Lead Lines?\u003c\/h3\u003e\n\u003cp\u003eThe Redi-Lead strips are made to look like lead came and hold well on prepared surfaces, but they are an adhesive decoration rather than a metal lead. For best longevity, avoid constant handling and finish with Liquid Leading; they can be repositioned for several weeks when first applied.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/8\" thickness gives a convincing, visible lead profile.\u003c\/li\u003e\n  \u003cli\u003eAdhesive retains repositionability up to 4 weeks under normal conditions.\u003c\/li\u003e\n  \u003cli\u003eNot intended for prolonged outdoor exposure or heavy wear without sealing.\u003c\/li\u003e\n  \u003cli\u003eUse caution on delicate or porous finishes — perform a small adhesion test.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools or supplies should I pair with these strips?\u003c\/h3\u003e\n\u003cp\u003ePair the lead lines with Gallery Glass Liquid Leading and stained-glass paint for cohesive results. Basic craft tools like scissors, a craft knife, rubbing alcohol, and a soft cloth will make cutting, cleaning and positioning easier.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGallery Glass Liquid Leading to blend joints and create a soldered appearance.\u003c\/li\u003e\n  \u003cli\u003eStained-glass paints to fill panels and enhance colour contrast.\u003c\/li\u003e\n  \u003cli\u003eScissors or hobby knife for precise trimming.\u003c\/li\u003e\n  \u003cli\u003eCleaning wipe (isopropyl alcohol) and lint-free cloth for surface prep.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Crafters, DIY decorators and instructors who want the look of leaded stained glass without metalworking will appreciate the convenience and volume of this 72 ft value pack. It’s especially useful for group workshops, seasonal decorations and upcycling projects where consistent, fuss-free leading strips save time and produce clean, repeatable results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lead lines reusable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are repositionable for up to four weeks but not designed for repeated long-term reuse; adhesive weakens with excess handling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use them outdoors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They can be used outdoors short-term, but prolonged exposure to weather may reduce adhesion and finish life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gallery Glass","offers":[{"title":"Default Title","offer_id":55255249191249,"sku":"B0018N3SZ2","price":37.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/gallery-glass-front-packaging.jpg?v=1791701201"},{"product_id":"artimuses-copper-foil-tape-for-stained-glass-black-backed-1-4-scalloped-36-yd-strong-adhesive-weather-resistant","title":"ARTIMUSES Copper Foil Tape for Stained Glass — Black-Backed 1\/4\" Scalloped, 32.9 m; Strong Adhesive, Weather-Resistant","description":"\u003cp\u003e\u003cstrong\u003eARTIMUSES Black Backed 1\/4 Inch Scalloped Copper Foil Tape is a decorative, adhesive copper foil designed for stained glass, mirrored projects, and detailed craft edging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis scalloped-edge copper foil roll combines a classic metallic finish with a black backing to conceal copper highlights on transparent or mirrored glass. The foil is supplied on a 36-yard roll and features a narrower 1\/4\" scalloped bottom edge with a slightly wider 11\/32\" top scallop, giving you a refined border that both adheres reliably and hides solder lines where desired. It’s engineered for hobbyists and professional makers who want consistent tack, weather resistance, and a finished look that reads clean from both sides.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the scalloped edge improve finished stained-glass pieces?\u003c\/h3\u003e\n\u003cp\u003eThe scalloped profile creates an ornamental border that frames glass segments with a subtle wave instead of a straight line, adding visual interest without extra cutting or tooling. It also helps disguise small gaps at seams and gives solder something to overlap for a neater result.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDecorative scalloped shape for finished edges\u003c\/li\u003e\n  \u003cli\u003eDifferent top and bottom widths for easier solder coverage\u003c\/li\u003e\n  \u003cli\u003eConceals minor irregularities between glass pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the black backing affect how the foil looks on clear or mirrored glass?\u003c\/h3\u003e\n\u003cp\u003eThe black backing intentionally reduces the shine-through of copper on transparent or mirrored surfaces, producing a toned, low-reflective border that keeps focus on the glass. It’s ideal when you want a darker outline or when the project’s aesthetics call for muted metal accents rather than bright copper glare.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlack backing minimizes metallic reflection on see-through glass\u003c\/li\u003e\n  \u003cli\u003eGives a consistent dark outline for mirrored applications\u003c\/li\u003e\n  \u003cli\u003ePreserves the appearance of delicate or tinted glasswork\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable is the adhesive and how does it hold up over time?\u003c\/h3\u003e\n\u003cp\u003eARTIMUSES foil uses strong tack adhesive formulated for stained-glass and craft substrates; it bonds quickly and maintains adhesion across normal temperature ranges. The product is described as resistant to temperature variations and weathering, so it performs well in indoor and many sheltered outdoor displays when properly soldered and sealed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOutstanding initial tack for quick placement\u003c\/li\u003e\n  \u003cli\u003eResists typical temperature and weather exposure\u003c\/li\u003e\n  \u003cli\u003eAdheres cleanly to glass and many craft materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the dimensions, and how much material will a 36-yard roll cover?\u003c\/h3\u003e\n\u003cp\u003eThis roll provides a 1\/4\" scalloped bottom width with an 11\/32\" top scallop, and contains 36 yards (108 feet) of tape—enough for multiple projects or several large panels depending on your pattern. The narrow profile makes it efficient for detailed work and repeated use without excessive waste.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBottom scallop: 1\/4 inch; top scallop: 11\/32 inch\u003c\/li\u003e\n  \u003cli\u003eLength: 36 yards per roll for extended coverage\u003c\/li\u003e\n  \u003cli\u003eCompact width suits intricate stained-glass mosaics and crafts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: This ARTIMUSES scalloped copper foil is aimed at stained-glass artists, hobby crafters, mirror framers, and DIY creatives who want a decorative, black-backed option to reduce copper shine and achieve clean solder lines. If you need consistent adhesion, a decorative scalloped edge, and a darkened border for transparent or mirrored projects, this tape is a practical choice. Use it when precision, aesthetic control, and material longevity are part of your workflow.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this foil suitable for mirrored glass?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The black backing reduces copper reflection, making it well suited for mirrored glass edges.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I solder directly over this scalloped foil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The tape is designed for stained-glass soldering; the top scallop gives solder overlap for secure joints.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARTIMUSES","offers":[{"title":"Default Title","offer_id":55255264461137,"sku":"B0CP5ZGDTF","price":38.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/artimuses-front-roll-view.jpg?v=1791701948"},{"product_id":"glassco-3-16-round-h-lead-came-for-stained-glass-12-ft-two-6-ft-coils-5-32-channel-for-reliable-fit","title":"Glassco 3\/16\" Round H Lead Came for Stained Glass — 3.7 m (two 1.8 m coils), 5\/32\" Channel for Reliable Fit","description":"\u003cp\u003e\u003cstrong\u003eGlassco 3\/16\" Round H lead came is a 12-foot hobby lead strip (two 6-foot coils) engineered for stained glass work, offering a 3\/16\" face and a 5\/32\" channel for consistent, professional-looking seams.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you are repairing a vintage panel or building a new decorative window, this Glassco round H lead came supplies a reliable backbone for your soldered joints. Arriving as two pre-rolled 6-foot strips in one bag, it saves prep time and stores compactly. The thicker rounded faces and precisely sized channel make cutting, fitting, and soldering easier across medium and larger pieces.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this lead came improve my stained glass assembly?\u003c\/h3\u003e\n\u003cp\u003eThe rounded 3\/16\" face gives finished seams a cleaner, more substantial profile that complements many design styles. The 5\/32\" channel accommodates glass edges consistently so your foil or glass fits with minimal gap. Because the came is made from quality lead, it holds its shape while you position and solder pieces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/16\" face for a visible, supportive seam\u003c\/li\u003e\n  \u003cli\u003e5\/32\" channel for reliable glass edge fit\u003c\/li\u003e\n  \u003cli\u003eDurable lead resists warping during soldering\u003c\/li\u003e\n  \u003cli\u003ePre-rolled 6 ft strips for ready use and storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and lengths are included, and will it fit my project?\u003c\/h3\u003e\n\u003cp\u003eThis package contains two 6-foot strips (total 12 feet) of round H lead came, suitable for medium to large panels and decorative features. The consistent cross-section throughout each length makes it straightforward to cut and measure for windows, lamps, transoms, and smaller repair tasks. If you need longer runs, multiple packages can be spliced with standard overlaps and solder joints.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo pre-rolled 6 ft pieces (12 ft total)\u003c\/li\u003e\n  \u003cli\u003eUniform dimensions across full length\u003c\/li\u003e\n  \u003cli\u003eEasy to splice for longer spans\u003c\/li\u003e\n  \u003cli\u003eWorks for decorative and repair applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I handle and solder this came safely and effectively?\u003c\/h3\u003e\n\u003cp\u003eHandle the lead came with gloves to limit skin contact and work in a well-ventilated area when soldering. Trim with came knives or nippers for clean joins, then fit and tack-solder before completing seams. Because the lead retains shape well, you’ll find fewer adjustments are needed during soldering steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse gloves and ventilation to reduce exposure\u003c\/li\u003e\n  \u003cli\u003eCut with came knives or nippers for precise ends\u003c\/li\u003e\n  \u003cli\u003eTack-solder first, then complete the seams\u003c\/li\u003e\n  \u003cli\u003eShape and secure easily due to stable lead composition\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat visual effect does round H came create in a finished piece?\u003c\/h3\u003e\n\u003cp\u003eThe round H profile gives a softened, rounded edge that reads as a subtle border around glass pieces, offering a classic stained glass aesthetic. Its proportional face width frames glass elements without overpowering fine details, and the smoother contours catch light differently than flat came for a refined finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRounded face for a softer, classic look\u003c\/li\u003e\n  \u003cli\u003eFrames glass without obscuring detail\u003c\/li\u003e\n  \u003cli\u003eReflective contours enhance light play\u003c\/li\u003e\n  \u003cli\u003eSuitable for both traditional and contemporary designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for: Glassco 3\/16\" round H lead came is aimed at hobbyists, stained glass students, and experienced artists who want a dependable, easy-to-use lead came for medium and larger projects. It suits workshops, studios, and restoration work where consistent sizing, storage convenience, and a polished final appearance matter. Choose this came when you need predictable fit, good soldering performance, and a finished seam that complements your glass design.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this lead came suitable for lampwork and smaller pieces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 5\/32\" channel and 3\/16\" face work for many small projects, but check glass edge thickness for a snug fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I store leftover came to prevent damage?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Keep it pre-rolled in the original bag or a dry container to retain shape and avoid crushing or corrosion.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Glassco","offers":[{"title":"Default Title","offer_id":55255331209553,"sku":"B0D1PHP7HQ","price":39.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/glassco-front-packaging-lead-came.jpg?v=1791704562"},{"product_id":"artimuses-copper-foil-tape-for-stained-glass-large-scalloped-36-yd-black-backed-heat-resistant-adhesive","title":"ARTIMUSES Copper Foil Tape for Stained Glass — Large Scalloped, 32.9 m Black-Backed, Heat-Resistant Adhesive","description":"\u003cp\u003e\u003cstrong\u003eARTIMUSES Double Edged Scalloped Copper Foil Tape is a 36-yard, black-backed decorative adhesive tape designed to finish and reinforce stained glass and craft edges with a scalloped profile.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis copper foil roll combines a decorative scalloped edge with a strong, temperature-resistant adhesive to simplify edging, soldering preparation, and aesthetic finishing on stained glass panels and other handcrafts. The black backing creates a consistent dark line under solder or patina for a professional-looking finish, while the scalloped shape adds a subtle decorative flourish to borders, lamp shades, and mixed-media projects.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the scalloped edge change the look of my stained glass work?\u003c\/h3\u003e\n\n\u003cp\u003eThe scalloped profile produces a repeated curved finish along glass seams that catches light differently than straight-edged foil, lending a softer, ornamental border. It’s especially effective on floral motifs, lamp rims, and pieces where a decorative silhouette complements the glass design.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBottom scallop width: 7\/32 inch for precise seam coverage.\u003c\/li\u003e\n  \u003cli\u003eTop scallop width: 13\/32 inch to accommodate solder and patina.\u003c\/li\u003e\n  \u003cli\u003eCreates a shadowed, textured outline under solder for visual depth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this copper foil tape suitable for soldering and finishing?\u003c\/h3\u003e\n\n\u003cp\u003eThe tape is copper-based with a consistent black backing that provides good adhesion and a uniform surface under solder. It withstands typical temperature ranges encountered in stained glass soldering and resists weathering, helping joints remain secure and tidy over time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOutstanding tack for long-lasting adhesion to glass and many craft substrates.\u003c\/li\u003e\n  \u003cli\u003eHeat-resistant copper layer compatible with soldering workflows.\u003c\/li\u003e\n  \u003cli\u003eBlack backing masks gaps and yields a seamless finish when patina is applied.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply ARTIMUSES scalloped foil for best results?\u003c\/h3\u003e\n\n\u003cp\u003eClean and dry glass edges before applying; unwind the tape, align the scalloped edge with the glass, and press firmly to adhere. Trim excess with scissors or a craft knife, then burnish the foil to ensure even contact before soldering or patina application.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSurface prep: remove dust, oils, and moisture for maximum stickiness.\u003c\/li\u003e\n  \u003cli\u003eUse a fid or burnishing tool to seat the foil into glass contours.\u003c\/li\u003e\n  \u003cli\u003eTrim carefully and overlap joints minimally to avoid bulk under solder.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much tape do I get and what projects is it best for?\u003c\/h3\u003e\n\n\u003cp\u003eEach roll contains 36 yards of double-edged scalloped copper foil—ample for multiple medium-to-large stained glass panels, lamp repairs, trim accents on mirrors, or mixed-media crafts. The generous length and decorative profile make it a practical choice for hobbyists who work on recurring projects or small commercial makers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e36 yards per roll suitable for repeated use across several projects.\u003c\/li\u003e\n  \u003cli\u003eLarge scalloped profile works well on lamps, panels, and edging details.\u003c\/li\u003e\n  \u003cli\u003eDurable enough for indoor decorative pieces and light exterior applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Makers, hobbyists, and small-batch studios who want a decorative, reliable copper foil that simplifies soldering preparation and adds a distinctive scalloped edge. If you build stained glass lamps, decorative panels, or craft accent pieces and need consistent adhesion, heat resistance, and a dark backing for a polished finish, this roll gives you a long-lasting, easy-to-apply solution.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFeatures:\n    \u003cul\u003e\n      \u003cli\u003eScalloped copper foil tape produces a decorative finished edge.\u003c\/li\u003e\n      \u003cli\u003eBlack-backed foil ensures a uniform dark appearance under solder.\u003c\/li\u003e\n      \u003cli\u003eStrong adhesive adheres well to glass and many craft materials.\u003c\/li\u003e\n      \u003cli\u003eResistant to temperature changes and weathering for durable results.\u003c\/li\u003e\n      \u003cli\u003eScallop dimensions: bottom 7\/32 inch, top 13\/32 inch; 36 yards per roll.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this foil suitable for soldering?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The copper foil accepts solder and is heat-resistant, with a black backing to produce a uniform finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How wide are the scallops and how long is the roll?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Bottom scallop is 7\/32 inch, top scallop 13\/32 inch, and the roll contains 36 yards.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARTIMUSES","offers":[{"title":"Default Title","offer_id":55293448126801,"sku":"B0CYL6MS25","price":41.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/artimuses-front-packaging-scalloped-copper-foil.jpg?v=1791924890"},{"product_id":"artimuses-stained-glass-lead-lines-12in-x-1-8in-144-ft-adhesive-faux-lead-strips-for-windows-crafts","title":"ARTIMUSES Stained Glass Lead Lines 12in x 1\/8in, 43.9 m — adhesive faux-lead strips for windows \u0026 crafts","description":"\u003cp\u003e\u003cstrong\u003eARTIMUSES Stained Glass Lead Lines are adhesive, 1\/8\" faux lead strips that simulate stained-glass leading—12 strips of 12\" for a total of 144 linear feet suitable for windows, frames, vases, doors and small craft projects.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eGive plain glass surfaces the structured look of classic stained glass without soldering or heavy tools. These thin, adhesive-backed strips recreate the appearance of lead came so you can frame coloured panes, outline geometric designs, or refresh small decorative pieces. The strips are easy to cut, repositionable during installation, and designed to work on a variety of clean, flat glass and smooth surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I prepare my surface for the ARTIMUSES lead lines?\u003c\/h3\u003e\n\n\u003cp\u003eProper surface prep ensures the adhesive grips and the lines lay flat without bubbles or gaps. Clean the glass thoroughly with a glass cleaner or isopropyl alcohol, dry completely, and work in a dust-free area for best results.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRemove dirt, oils, and residues using a lint-free cloth and glass cleaner.\u003c\/li\u003e\n  \u003cli\u003eDry surface fully to prevent trapping moisture under the adhesive.\u003c\/li\u003e\n  \u003cli\u003eTest a small strip in a corner to confirm adhesion and repositionability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I measure and cut the strips to make a stained-glass pattern?\u003c\/h3\u003e\n\n\u003cp\u003eMeasure each section of your design and mark the required lengths on the backing before cutting. Use sharp scissors or a utility cutter to trim clean edges; the product is forgiving and can be adjusted slightly during placement.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLay out your pattern on paper or tape a stencil to the glass as a guide.\u003c\/li\u003e\n  \u003cli\u003eCut slightly longer than needed to allow for alignment adjustments.\u003c\/li\u003e\n  \u003cli\u003eButt ends together or overlap minimally to mimic real lead joints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lead lines work on curved or irregular glass pieces?\u003c\/h3\u003e\n\n\u003cp\u003eThe strips are best on flat or gently curved surfaces where they can adhere without excessive stretching. They are repositionable during placement, but stretching or bending sharply can reduce adhesion and distort the look.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse on vases or rounded objects with gentle curves only.\u003c\/li\u003e\n  \u003cli\u003eAvoid tight bends; trim into shorter segments for contouring.\u003c\/li\u003e\n  \u003cli\u003ePress firmly after placement and smooth with a soft tool for better adhesion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will the adhesive-backed lead lines last and how do I maintain them?\u003c\/h3\u003e\n\n\u003cp\u003eLongevity depends on surface, environmental conditions, and handling. On indoor glass that is kept clean and away from harsh moisture or heat, the strips retain appearance for months to years; occasional gentle cleaning maintains the finish.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWipe gently with a damp, non-abrasive cloth—avoid solvents that could weaken adhesive.\u003c\/li\u003e\n  \u003cli\u003eIndoor use extends the life compared with outdoor exposure to sun and weather.\u003c\/li\u003e\n  \u003cli\u003eIf edges lift, press back into place or replace the affected strip sections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? Crafters, decorators, hobbyists and small-business owners who want the aesthetic of stained glass without glass cutting or soldering will find these ARTIMUSES lead lines useful. They’re ideal for DIY window accents, framed glass art, decorative vases, retail displays, and seasonal décor. If you need a quick visual upgrade on clean, flat glass surfaces—without specialized tools—this value pack offers plenty of material to experiment and refine designs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these lead lines be removed without damaging glass?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they are repositionable; remove slowly and clean residue with glass cleaner. Avoid scraping hard to prevent surface marks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these suitable for outdoor windows?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They can be used outdoors briefly, but indoor use is recommended for longer-lasting adhesion and appearance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARTIMUSES","offers":[{"title":"Default Title","offer_id":55293763387729,"sku":"B0DG2M7FDB","price":42.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/artimuses-front-packaging-stained-glass-lead-lines.jpg?v=1791925789"},{"product_id":"artimuses-scalloped-copper-foil-tape-for-stained-glass-small-scallop-36-yd-black-backed","title":"ARTIMUSES Scalloped Copper Foil Tape for Stained Glass — Small Scallop, 32.9 m, Black-Backed","description":"\u003cp\u003e\u003cstrong\u003eARTIMUSES Double Edged Scalloped Copper Foil Tape is a decorative, black-backed copper adhesive tape designed to edge stained glass and craft projects with a scalloped finish.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 36-yard roll of small scalloped copper foil combines a decorative profile with reliable tack and weather resistance. The black backing yields a consistent dark line when soldered, and the scalloped shape adds a finished, ornamental border to stained glass panels, mosaic edges, lamps, and other handicrafts. Its measured widths — 7\/32 inch at the scallop base and 3\/8 inch at the top — make it suitable for fine-detail work while still providing enough surface for secure adhesion and soldering.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the scalloped edge change the look of stained glass pieces?\u003c\/h3\u003e\n\n\u003cp\u003eThe scalloped profile creates a repeating rounded border that softens straight lines and brings a decorative, victorian or floral-inspired accent to panels. Instead of a plain straight seam, the scallops catch light and shadow, adding texture and depth without additional materials or complex cutting.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProduces a uniform ornamental rim along glass joins.\u003c\/li\u003e\n  \u003cli\u003eEnhances visual interest without extra glazing techniques.\u003c\/li\u003e\n  \u003cli\u003eWorks with both coloured and textured glass to highlight edges.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this tape stick well and survive soldering or outdoor use?\u003c\/h3\u003e\n\n\u003cp\u003eYes — ARTIMUSES foil is formulated for strong initial tack and stability during soldering. The adhesive adheres to glass reliably, and the copper foil resists temperature changes and weathering, making it suitable for indoor panels and items exposed to occasional humidity or temperature shifts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOutstanding initial tack for secure placement on glass.\u003c\/li\u003e\n  \u003cli\u003eHeat-resistant copper layer tolerates soldering temperatures.\u003c\/li\u003e\n  \u003cli\u003eWeather-resistant finish for longer-lasting outdoor décor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat dimensions and roll length does this product provide?\u003c\/h3\u003e\n\n\u003cp\u003eThe foil features a small scallop profile with specific base and top widths for precision work, and a generous 36-yard roll to cover multiple projects or large panels. These dimensions help you plan layout and estimate material needs without frequent reorders.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBottom of scallop: 7\/32 inch for fitting tight joins.\u003c\/li\u003e\n  \u003cli\u003eTop of scallop: 3\/8 inch for solder coverage and strength.\u003c\/li\u003e\n  \u003cli\u003eRoll length: 36 yards to handle several medium-sized projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use this tape in my crafting workflow?\u003c\/h3\u003e\n\n\u003cp\u003eApply the foil directly to clean, dry glass edges, burnish it smooth, and trim excess before soldering or finishing. The black backing provides a uniform dark joint; after soldering you can patina or polish according to your design preferences.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eClean glass edges with alcohol before applying for best adhesion.\u003c\/li\u003e\n  \u003cli\u003ePress and burnish foil to eliminate air pockets and ensure even contact.\u003c\/li\u003e\n  \u003cli\u003eTrim neatly with a sharp blade; solder or patina as desired.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? ARTIMUSES Scalloped Copper Foil Tape is aimed at stained-glass makers, hobbyists, and craft professionals who want a decorative edge without complex tooling. It suits artisans creating lampshades, window panels, sun catchers, and mixed-media projects that benefit from a consistent dark seam and an ornamental scalloped outline. Whether you’re refining a beloved pattern or experimenting with decorative borders, this tape gives predictable handling, aesthetic enhancement, and enough length to complete multiple pieces.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I solder directly over this copper foil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The copper foil tolerates standard soldering; ensure the foil is well burnished and use proper ventilation when soldering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long will one 36-yard roll last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Coverage depends on project size; a 36-yard roll typically handles several small panels or one to two medium lamp shades.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARTIMUSES","offers":[{"title":"Default Title","offer_id":55294232953169,"sku":"B0CYLJ15VY","price":41.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/artimuses-front-roll-scene.jpg?v=1791927785"},{"product_id":"huoyoger-round-u-lead-came-for-stained-glass-3-16-face-1-lb-spool-9-ft-5-32-channel","title":"HUOYOGER Round U Lead Came for Stained Glass — 3\/16\" Face, 454 g Spool (≈2.7 m), 5\/32\" Channel","description":"\u003cp\u003e\u003cstrong\u003eHUOYOGER 3\/16\" Round U lead came is a pliable, 1 lb spooled channel designed to hold stained glass pieces securely while allowing smooth bending, cutting, and soldering for hobby or pro stained-glass work.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 3\/16\" round U lead came from HUOYOGER is crafted for stained-glass artists who need a consistent, easy-to-work channel for framing panels, suncatchers, and small decorative windows. The spool delivers approximately 9 feet of came with a 5\/32\" deep channel and a 3\/16\" face width, offering a balance of stiffness for support and softness for shaping. It arrives unstretched and flexible, which helps you form crisp joints and achieve clean sightlines in finished pieces.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this lead came help when building stained glass panels?\u003c\/h3\u003e\n\u003cp\u003eThe U-shaped profile locks glass edges into a uniform channel so pieces stay aligned during assembly and soldering. Its soft but sturdy composition allows you to bend curves and form corners without cracking, creating even lead lines and neat joints in finished work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSecure 5\/32\" channel depth holds standard glass thicknesses snugly.\u003c\/li\u003e\n  \u003cli\u003e3\/16\" face width provides visible, consistent sightlines for classic leaded looks.\u003c\/li\u003e\n  \u003cli\u003ePliable alloy simplifies bending, easing complex shapes and curves.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I solder and finish joints cleanly with this came?\u003c\/h3\u003e\n\u003cp\u003eYes — the came is designed to accept solder at joints, producing smooth, strong connections when flux and soldering techniques are applied correctly. Its malleable finish reduces white oxidation and helps solder flow evenly across seams.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTarnish-resistant surface reduces oxidation and white dusting over time.\u003c\/li\u003e\n  \u003cli\u003eMalleable metal promotes even solder bead formation at intersections.\u003c\/li\u003e\n  \u003cli\u003eConsistent sizing reduces gaps, making soldering faster and cleaner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and quantities are included, and which projects suit this spool?\u003c\/h3\u003e\n\u003cp\u003eThis product is a 1 lb spool offering roughly 9 feet of HUOYOGER round U came, with a 5\/32\" internal channel depth and a 3\/16\" face width. It’s ideal for small to medium hobby projects such as suncatchers, small panels, beveled inserts, and repair work where precise, uniform lead lines are desirable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: 1 lb spool — approximately 9 feet of came.\u003c\/li\u003e\n  \u003cli\u003eDimensions: 5\/32\" channel depth, 3\/16\" face width, 3\/16\" round profile.\u003c\/li\u003e\n  \u003cli\u003eBest for: hobby suncatchers, small windows, repairs, and practice pieces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I handle and shape this came without damaging it?\u003c\/h3\u003e\n\u003cp\u003eThe HUOYOGER came ships unstretched and flexible to allow controlled shaping; use standard lead came tools like grozing pliers, a lead knife, and a came stretcher for precise results. Cut cleanly with a lead knife or saw, form curves with bending tools or by hand, and avoid overstretching to preserve channel integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut with a sharp lead knife or fine-tooth saw for neat ends.\u003c\/li\u003e\n  \u003cli\u003eUse grozing pliers and came stretching tools for long straight runs.\u003c\/li\u003e\n  \u003cli\u003eBend gently around forms to prevent cracking or kinks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This HUOYOGER 3\/16\" round U lead came is aimed at stained-glass hobbyists and small-studio artists who need a dependable, easy-to-work came for constructing and repairing decorative glass pieces. It suits makers who value consistent sizing, smooth solder joints, and a tarnish-resistant finish without committing to bulk industrial lengths. If you build suncatchers, practice leadwork, or create small framed panels, this spool offers convenient length, manageable weight, and the flexibility required to shape detailed designs while producing clean, professional-looking lead lines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What glass thickness fits this 3\/16\" U came?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 5\/32\" channel accommodates common stained-glass thicknesses; it fits most hobby glass pieces snugly for secure assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much came is on the spool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The product contains approximately 1 lb of came, roughly 9 feet in total length on the spool.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HUOYOGER","offers":[{"title":"Default Title","offer_id":55294273225041,"sku":"B0H44JQWY3","price":41.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/huoyoger-spool-front-view.jpg?v=1791928006"},{"product_id":"rainbow-art-glass-edco-copper-foil-tape-3-8-x-36-yds-1-25-mil-for-stained-glass-soldering-and-smooth-seams","title":"Rainbow Art Glass Edco Copper Foil Tape 3\/8\" x 32.9 m — 1.25 mil for stained glass soldering and smooth seams","description":"\u003cp\u003e\u003cstrong\u003eEdco Copper Foil Tape 3\/8\" x 36 yards (1.25 mil) is a premium copper-backed adhesive foil roll made for precise, durable seams in stained glass and art glass copper-foil techniques.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you work in stained glass or mixed-media art, choosing the right foil affects solder flow, joint strength, and final appearance. This Edco copper foil supplies a continuous 36-yard roll of copper-backed adhesive with a 1.25 mil thickness and a 3\/8\" width—dimensions that balance flexibility and rigidity for common window panels, lampshades, and decorative pieces. The copper backing is compatible with conventional lead-free and leaded solders and helps create consistent, neat seams that ease polishing and patination.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this foil make copper-foil projects easier?\u003c\/h3\u003e\n\u003cp\u003eThe 3\/8\" width and 1.25 mil thickness are chosen to wrap small- to medium-scale glass shapes smoothly while remaining stiff enough to hold solder. The adhesive backing avoids glue mess and helps maintain accurate edges as you burnish foil onto glass.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8\" width contours to glass curves and straight edges with minimal overlap.\u003c\/li\u003e\n  \u003cli\u003e1.25 mil thickness provides a predictable solder ridge and easier ironing.\u003c\/li\u003e\n  \u003cli\u003eAdhesive backing secures foil during handling and reduces rework.\u003c\/li\u003e\n  \u003cli\u003e36 yards per roll supplies multiple panels or larger single projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and tools pair well with this Edco copper foil?\u003c\/h3\u003e\n\u003cp\u003eThis tape pairs with typical stained-glass toolkits: glass cutter, grozing pliers, burnisher, flux, and a soldering iron. For finishing, use patina, polish, and clear lacquer as desired to protect and colour the solder seams.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a burnisher to seat foil smoothly and remove air pockets.\u003c\/li\u003e\n  \u003cli\u003eFlux and a soldering iron (temperature appropriate for your solder) are required for joining seams.\u003c\/li\u003e\n  \u003cli\u003ePatinas and polishes produce the final surface look after soldering.\u003c\/li\u003e\n  \u003cli\u003eGlass-cutting and shaping tools prepare the pieces before foiling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much foil do I get and how long will it last?\u003c\/h3\u003e\n\u003cp\u003eEach roll contains 36 yards of continuous foil, sufficient for many small projects or multiple medium pieces. Actual longevity depends on project size, waste from trimming, and frequency of use; hobbyists can often complete numerous panels before needing more.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e36 yards (108 feet) per roll gives ample length for repeated use.\u003c\/li\u003e\n  \u003cli\u003eConservative cutting and careful burnishing reduce waste.\u003c\/li\u003e\n  \u003cli\u003eStoring roll in a dry, cool place preserves adhesive performance.\u003c\/li\u003e\n  \u003cli\u003eReplacement interval varies by workshop throughput and project scale.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this foil work with different solders and finishes?\u003c\/h3\u003e\n\u003cp\u003eThe copper backing works with both lead-free and traditional solders; its surface supports even solder flow when proper fluxing and soldering technique are used. After soldering you can apply patina or polish to achieve a range of aesthetic finishes without compromising seam integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCopper backing accepts commonly used stained-glass solders.\u003c\/li\u003e\n  \u003cli\u003eProper fluxing ensures clean solder adhesion and flow.\u003c\/li\u003e\n  \u003cli\u003ePatinas and polishes can be applied after soldering for colour and protection.\u003c\/li\u003e\n  \u003cli\u003eRinse and clean solder residues to preserve long-term appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Edco copper foil roll is aimed at stained-glass hobbyists, artisans, and small studios that need a reliable, mid-weight foil for copper-foil construction. It suits makers who value a balance between flexibility for curved shapes and enough stiffness for clean solder beads—ideal for lampmakers, window panel crafters, and decorative glass artists seeking a dependable 36-yard supply.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this copper foil self-adhesive?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Edco copper foil has an adhesive backing to hold foil securely on glass while you burnish and solder.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What width and thickness are included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This roll is 3\/8\" wide and 1.25 mil thick, supplied as a continuous 36-yard length.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rainbow Art Glass","offers":[{"title":"Default Title","offer_id":55294392074577,"sku":"B0DXQH2WYY","price":45.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/rainbow-art-glass-edco-copper-foil-roll-front-view.jpg?v=1791929081"},{"product_id":"huoyoger-1-8-round-u-lead-came-for-stained-glass-1-lb-13-ft-5-32-channel-tarnish-resistant","title":"HUOYOGER 1\/8\" Round U Lead Came for Stained Glass — 454 g (≈4 m), 5\/32\" Channel, Tarnish-Resistant","description":"\u003cp\u003e\u003cstrong\u003eHUOYOGER 1\/8\" round U lead came is a pliable, tarnish-resistant lead channel sold on a 1 lb spool (about 13 ft) designed to securely hold and solder stained glass pieces for suncatchers, panels, and hobby projects.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're repairing a vintage window or building a new stained-glass suncatcher, this U-shaped lead came gives you consistent channel depth and a soft, workable alloy that bends and shapes without cracking. The roll includes approximately 13 feet of consistently sized came with a 5\/32\" deep channel and a 1\/8\" face, offering dependable fit and neat lines for hobbyists and experienced makers alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this lead came perform when bending and shaping glass designs?\u003c\/h3\u003e\n\u003cp\u003eThe HUOYOGER round U came is formulated to be malleable enough for tight curves yet sturdy enough to hold glass pieces securely while you assemble. It resists cracking during forming and maintains a clean edge for even soldering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMalleable alloy for smooth bending and tight radius curves\u003c\/li\u003e\n  \u003cli\u003eConsistent channel depth (5\/32\") to accept common glass thicknesses\u003c\/li\u003e\n  \u003cli\u003eSoft face (1\/8\") that compresses slightly for snug joints\u003c\/li\u003e\n  \u003cli\u003eSturdy hold to keep shapes stable during assembly and soldering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and how much material is included?\u003c\/h3\u003e\n\u003cp\u003eThis listing provides roughly 13 feet of round U lead came on a 1 lb spool, with a channel depth of 5\/32\" and a face width of 1\/8\". Those dimensions suit many small-to-medium stained-glass projects and make layout and spacing predictable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTotal length per spool: ~13 feet (1 lb)\u003c\/li\u003e\n  \u003cli\u003eChannel depth: 5\/32\" to receive glass edges\u003c\/li\u003e\n  \u003cli\u003eFace width: 1\/8\" for consistent visible lead lines\u003c\/li\u003e\n  \u003cli\u003eEven sizing for repeatable joins and straight runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I solder and finish this came easily for a polished piece?\u003c\/h3\u003e\n\u003cp\u003eThe came's soft face and even channel allow for clean solder joints and a smooth finish. It is treated to resist rapid oxidation and white dusting, so you get fewer surface blemishes while you work and a dependable base for patina or polishing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSoft lead surface that takes solder smoothly at joints\u003c\/li\u003e\n  \u003cli\u003eTarnish-resistant finish reduces oxidation during assembly\u003c\/li\u003e\n  \u003cli\u003eWorks with standard flux, solder, and came stretcher tools\u003c\/li\u003e\n  \u003cli\u003eAccepts patina or polishing for a finished look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and techniques work best with this U lead came?\u003c\/h3\u003e\n\u003cp\u003eUse standard stained-glass cutters, grozing pliers, came stretcher, and a soldering iron to assemble and finish panels or suncatchers. The came's pliability makes it forgiving when nursing curves and can be trimmed with metal shears for precise joins.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGrozing pliers and came stretcher for shaping and tightening\u003c\/li\u003e\n  \u003cli\u003eSmall metal shears or nippers to cut and trim lengths cleanly\u003c\/li\u003e\n  \u003cli\u003eFlux and low-melting solder for secure, tidy joints\u003c\/li\u003e\n  \u003cli\u003eFiles and patina for final edge finishing and aging effects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? HUOYOGER 1\/8\" round U lead came is aimed at hobbyists, stained-glass artists, and restoration makers who need a reliable, easy-to-shape channel for small to medium projects. If you build suncatchers, lamp panels, or repair heritage glass, this spool-size is economical for practice pieces and detailed work without committing to large bulk orders. It’s also suitable for classroom settings or craft groups where consistent sizing and easy handling make teaching and learning more efficient.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What glass thickness fits this 1\/8\" U lead came?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 5\/32\" channel comfortably accepts typical stained-glass thicknesses up to about 3mm–4mm, suitable for most hobby glass sheets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this came ready to solder without extra cleaning?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It ships with a tarnish-resistant finish, but light cleaning and flux are recommended for best solder adhesion.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HUOYOGER","offers":[{"title":"Default Title","offer_id":55294473568593,"sku":"B0H441GMRQ","price":41.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/huoyoger-front-packaging-lead-came.jpg?v=1791930951"},{"product_id":"huoyoger-round-u-lead-came-for-stained-glass-5-64-face-1-lb-16-ft-flexible-easy-solder","title":"HUOYOGER Round U Lead Came for Stained Glass – 5\/64\" Face, 454 g (≈4.9 m), Flexible \u0026 Easy-Solder","description":"\u003cp\u003e\u003cstrong\u003eHUOYOGER 5\/64\" Round U Came is a pliable, 1 lb spooled lead came designed to hold and frame stained glass pieces precisely for small panels and suncatchers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis round U-shaped lead came from HUOYOGER is tailored for hobbyists and small-scale stained glass makers who need a consistently sized, easy-to-work-with channel. The came is supplied on a tidy spool totaling approximately 16 feet, with a 5\/64\" face and a 5\/32\" deep channel to hold glass securely while leaving a clean, narrow lead line. It’s flexible enough to bend and shape without cracking, resists common surface oxidation, and is formulated for smooth soldering at joints—making it a reliable finishing material for mosaic inserts, suncatchers, and framed glass accents.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this U came make assembling small stained glass pieces easier?\u003c\/h3\u003e\n\u003cp\u003eThe narrow round U profile hugs glass edges tightly so pieces stay aligned while you solder or secure joints. Its pliability makes forming curves and precise fits straightforward, and the spooled format keeps strips organized during work sessions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5\/64\" face with 5\/32\" deep channel holds thin glass securely\u003c\/li\u003e\n  \u003cli\u003eSoft, flexible lead came bends cleanly without cracking\u003c\/li\u003e\n  \u003cli\u003e1 lb spool provides about 16 feet for multiple small projects\u003c\/li\u003e\n  \u003cli\u003eSpooled delivery reduces tangles and simplifies measuring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I solder and patina this lead came without special steps?\u003c\/h3\u003e\n\u003cp\u003eThis lead came is formulated for hobby soldering and offers smooth joints when prepared correctly. Basic cleaning before soldering and standard fluxes work well; the product’s resistance to white oxidation helps maintain an even patina finish after patination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eResists white dusting and surface oxidation for consistent finish\u003c\/li\u003e\n  \u003cli\u003eMalleable composition supports reliable solder adhesion\u003c\/li\u003e\n  \u003cli\u003eStandard lead solder and flux are compatible\u003c\/li\u003e\n  \u003cli\u003eEven patina results with common staining finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and quantities are included, and what projects suit this came?\u003c\/h3\u003e\n\u003cp\u003eThe spool contains about 1 lb of round U came, equivalent to roughly 16 feet of lead. The dimensions—5\/64\" face and 5\/32\" channel—are ideal for delicate work where a slim lead line and snug glass fit are desired.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 lb spooled lead came, ~16 ft total length\u003c\/li\u003e\n  \u003cli\u003eFace width: 5\/64\"; channel depth: 5\/32\"\u003c\/li\u003e\n  \u003cli\u003eBest for suncatchers, small panels, mosaics, and trims\u003c\/li\u003e\n  \u003cli\u003eCan be used with lead came stretchers and small bending tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and handle the HUOYOGER U came for longevity?\u003c\/h3\u003e\n\u003cp\u003eKeep the spool in a dry, cool place to minimize surface oxidation and handle with protective gloves when cutting or shaping. Use clean tools and avoid excessive hammering to prevent cracking; gentle forming yields the best long-term performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStore in a sealed bag or box away from moisture\u003c\/li\u003e\n  \u003cli\u003eHandle with gloves to reduce skin oils and fingerprints\u003c\/li\u003e\n  \u003cli\u003eCut with appropriate lead shears for clean edges\u003c\/li\u003e\n  \u003cli\u003eUse gentle bending tools or a came stretcher for curves\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This HUOYOGER 5\/64\" round U came is aimed at hobbyists, craft students, and artisan makers who create small stained glass items—suncatchers, ornament panels, and fine-detail mosaics. If you need a reliably sized, flexible lead came that spools neatly and supports smooth soldering and an even patina, this product is built for precise small-scale glasswork rather than large structural panels.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this HUOYOGER came ready to solder?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The lead composition is suitable for standard solder and flux after cleaning; no special alloy required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What glass thickness fits the 5\/32\" channel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 5\/32\" deep channel fits thin hobby stained glass and suncatcher pieces typically under 3mm to 4mm thick.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HUOYOGER","offers":[{"title":"Default Title","offer_id":55294515937617,"sku":"B0H44DRVR2","price":41.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/huoyoger-front-package-spool.jpg?v=1791931739"},{"product_id":"innconee-stained-glass-supply-kit-1-lb-60-40-solder-3mm-7-22-yd-copper-foil-rolls","title":"Innconee Stained Glass Supply Kit — 1 lb 60\/40 Solder (3mm) + 7×22 yd Copper Foil Rolls","description":"\u003cp\u003e\u003cstrong\u003eInnconee’s 10-piece stained glass supply set gives hobbyists a ready-to-use kit: 1 lb 60\/40 solder wire plus seven widths of conductive copper foil tape and two small finishing tools.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you make stained glass panels, lamps, or decorative windows, having consistent solder and well-sized copper foil is essential. This kit bundles a 1 lb spool of 3 mm diameter 60% tin \/ 40% lead solder (melting point ~183°C \/ 361°F), seven 22-yard rolls of copper foil tape in a range of widths, and two small tools sized approximately 4.72 x 0.94 inches. The kit supplies the core materials needed to foil and solder pieces reliably so you can focus on design and fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the solder perform for stained glass work?\u003c\/h3\u003e\n\u003cp\u003eThe included solder is a standard 60\/40 tin-lead alloy favored for stained glass because it flows predictably and bonds well to copper foil. It melts around 183°C (361°F) and is supplied as a 3 mm diameter wire on a 1 lb spool—suited to most leaded glass techniques and beginner to intermediate projects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e60% tin \/ 40% lead composition for smooth flow and strong joints\u003c\/li\u003e\n  \u003cli\u003e3 mm diameter wire on a 1 lb spool for extended use\u003c\/li\u003e\n  \u003cli\u003eMelting point ~183°C (361°F) for standard soldering irons and torches\u003c\/li\u003e\n  \u003cli\u003eIntended for indoor stained glass applications; handle lead safely\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat copper foil sizes are included and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThis set contains seven rolls of true copper foil tape, each 22 yards long, in a variety of widths to fit different glass edge thicknesses and design styles. Choosing the right foil width helps produce neat seams and consistent solder coverage across both small and large pieces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWidths: 3\/16\", 7\/32\", 1\/4\", 0.3\", 0.4\", 0.5\", and 1\" to match diverse glass profiles\u003c\/li\u003e\n  \u003cli\u003eConductive copper on both sides for reliable solder adhesion\u003c\/li\u003e\n  \u003cli\u003eLong 22-yard rolls reduce need for frequent replacement\u003c\/li\u003e\n  \u003cli\u003eAdheres well to irregular edges for cleaner foiling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich tools and finishing touches are included, and how do they help?\u003c\/h3\u003e\n\u003cp\u003eAlongside solder and foil, the kit includes two small finishing tools sized roughly 4.72 x 0.94 inches to help press and trim foil, and scrape solder for flat, even seams. These simple hand tools speed up routine steps so you can achieve crisp, consistent edges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo compact hand tools for pressing and trimming copper foil\u003c\/li\u003e\n  \u003cli\u003eTools help seat foil tightly and prepare edges for soldering\u003c\/li\u003e\n  \u003cli\u003eUseful for flattening solder beads and cleaning excess material\u003c\/li\u003e\n  \u003cli\u003eSmall size suits detail work on modest panels and ornaments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this kit safe and suitable for indoor or outdoor projects?\u003c\/h3\u003e\n\u003cp\u003eThe copper foil rolls are versatile for both indoor and outdoor decorative applications, but the 60\/40 solder contains lead and is intended for indoor stained-glass crafting with proper ventilation and safety precautions. Use appropriate protective equipment and follow lead-handling guidelines when soldering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCopper tape durable for weather-exposed displays when sealed properly\u003c\/li\u003e\n  \u003cli\u003eSolder contains lead—best used in ventilated indoor workshops\u003c\/li\u003e\n  \u003cli\u003eWear gloves, wash hands after use, and avoid food contact\u003c\/li\u003e\n  \u003cli\u003eFinish panels with weatherproofing when installing outdoors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Innconee stained glass set is aimed at hobbyists, students, and crafters who want a compact, ready-to-start kit of commonly used materials. It’s well suited for beginners building small panels or experienced makers who need convenient spares of copper foil and a dependable spool of 60\/40 solder.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the solder composition and melting point?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The solder is a 60% tin \/ 40% lead alloy with a melting point around 183°C (361°F).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the copper foil rolls conductive and what widths are included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, foil is conductive on both sides. Rolls are 22 yards each in seven widths from 3\/16\" to 1\".\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Innconee","offers":[{"title":"Default Title","offer_id":55296716505425,"sku":"B0D2L41P2V","price":70.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/innconee-front-packaging-and-contents.jpg?v=1791946791"},{"product_id":"artimuses-stained-glass-lead-lines-24-strip-288-ft-12-x-1-8-adhesive-backed-repositionable","title":"ARTIMUSES Stained Glass Lead Lines — 24-strip 87.8 m (12\" x 1\/8\") Adhesive-Backed, Repositionable","description":"\u003cp\u003e\u003cstrong\u003eARTIMUSES Stained Glass Lead Lines are adhesive-backed strips that replicate traditional stained-glass leading, sold as 24 strips (12\" each) totaling 288 linear feet for easy decorative installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eGive plain glass surfaces the feel of classic leaded glass without soldering, messy materials, or specialized tools. These slim, 1\/8\" strips adhere to windows, mirrors, frames, vases, doors and other smooth glass to create geometric designs or to follow printed templates. The pack is designed for hobbyists, decorators, and small projects — cuttable, repositionable, and ready to apply after a simple cleaning.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I prepare glass for these adhesive lead lines?\u003c\/h3\u003e\n\n\u003cp\u003ePreparation is short but essential: remove dirt, dust, and oil so the adhesive bonds cleanly. Use a standard glass cleaner, dry completely, and avoid touching cleaned areas with bare fingers. Proper prep helps the strips stay secure and lie flat.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eClean with glass cleaner or isopropyl alcohol and a lint-free cloth.\u003c\/li\u003e\n  \u003cli\u003eAllow the surface to dry fully before applying the strips.\u003c\/li\u003e\n  \u003cli\u003eTest a small strip in a corner to confirm adhesion and repositionability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I cut and shape these strips for custom designs?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the material trims easily with scissors or a utility cutter so you can make straight cuts, angles, or custom lengths for detailed patterns. They’re flexible enough to follow gentle curves but work best in straight or angular compositions that mimic classic leading.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCut with sharp scissors or a craft blade for clean edges.\u003c\/li\u003e\n  \u003cli\u003eCreate mitered corners by cutting at matching angles for neat joints.\u003c\/li\u003e\n  \u003cli\u003eUse templates or painter’s tape to map complex designs before sticking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these adhesive lead lines damage glass or leave residue?\u003c\/h3\u003e\n\n\u003cp\u003eThe strips are formulated to remove without damaging glass when peeled carefully, though long-term outdoor exposure or heat may affect removability. For best results, avoid stretching the adhesive during placement and remove slowly at a low angle if you need to reposition or take them off.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for adhesive backing suited to glass and mirror surfaces.\u003c\/li\u003e\n  \u003cli\u003eRepositionable during installation; remove slowly to minimize residue.\u003c\/li\u003e\n  \u003cli\u003eAvoid prolonged outdoor exposure for easier removal later.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much material comes in this pack and what projects can it cover?\u003c\/h3\u003e\n\n\u003cp\u003eThe value pack contains 24 strips that are 12 inches long each, giving you 288 linear feet of 1\/8\" wide leading — enough for multiple frames, panes, or decorative accents. It’s ideal for crafting, small renovations, retail displays, and seasonal décor where the visual effect of leaded glass is desired without permanent alteration.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e24 strips × 12 inches = 288 linear feet total, 1\/8\" width.\u003c\/li\u003e\n  \u003cli\u003eGood for picture frames, cabinet glass, shower accents, vases, and door panels.\u003c\/li\u003e\n  \u003cli\u003ePerfect for DIY designers, event decorators, and craft studios.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? ARTIMUSES adhesive stained glass lead lines suit crafters, interior decorators, renters, and business owners who want the look of stained-glass leading with minimal fuss. They’re made for people who prefer quick, low-cost installation and flexible design options — from hobby projects and seasonal displays to retail visual merchandising. These strips are not a structural replacement for authentic leaded glazing but serve as an attractive, easy-to-install decorative alternative.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lead lines waterproof for shower glass?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They resist moisture but aren’t intended for continuous high-heat or high-humidity environments; test a small area first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I remove them without damaging the glass?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—peel slowly at a low angle for clean removal; prolonged outdoor exposure may leave light residue.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARTIMUSES","offers":[{"title":"Default Title","offer_id":55296728039761,"sku":"B0DG2LJJ1Z","price":56.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/artimuses-front-packaging-stained-glass-lead-lines_1441b436-c0bf-4a34-8304-60c9f6137689.jpg?v=1791947296"},{"product_id":"precizex-1-8-u-zinc-came-for-stained-glass-12-3ft-36ft-durable-corrosion-resistant-framing","title":"Precizex 1\/8\" U Zinc Came for Stained Glass — 12×3ft (36ft) Durable Corrosion-Resistant Framing","description":"\u003cp\u003e\u003cstrong\u003ePrecizex 1\/8\" U zinc came is a durable, U-shaped metal channel sold in twelve 3-foot strips (36 feet total) designed to frame, join, and finish stained glass panels for hobby and craft projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhether you're building a small sun-catcher, repairing a window panel, or framing a larger decorative piece, choosing the right came affects fit, finish, and stability. This zinc came is engineered to deliver consistent dimensions and smooth edges so your glass meets securely and looks professionally finished without extra bulk or heavy weight.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this came fit different stained glass projects?\u003c\/h3\u003e\n\u003cp\u003eThe U profile is especially adaptable for edging panels, creating lightweight frames, and receiving glass edges where a gentle lip is needed. With a 5\/32\" channel and a 1\/8\" face, it suits standard hobby glass thicknesses while keeping the frame slim and unobtrusive.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChannel: 5\/32\" — accepts most common stained glass thicknesses.\u003c\/li\u003e\n  \u003cli\u003eFace: 1\/8\" and width: 1\/4\" — provides a narrow, tidy border.\u003c\/li\u003e\n  \u003cli\u003eDepth: 3\/16\" — balances support with low profile.\u003c\/li\u003e\n  \u003cli\u003eLength: twelve 3 ft strips — total 36 ft for multiple panels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the zinc alloy affect durability and handling?\u003c\/h3\u003e\n\u003cp\u003eZinc alloy offers a good mix of strength and light weight, resisting corrosion better than untreated soft metals and remaining easy to cut and shape with common stained-glass tools. It holds solder and cement well, giving a reliable long-term frame without excess weight.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant zinc alloy — less rust risk in indoor use.\u003c\/li\u003e\n  \u003cli\u003eWorkable with standard cutters and grozing tools — easy to size.\u003c\/li\u003e\n  \u003cli\u003eAccepts solder and cement — solid, long-lasting joints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat visual finish and edge quality can I expect?\u003c\/h3\u003e\n\u003cp\u003eThese U came strips are produced with smooth, rounded edges to minimize sharpness and give a neat, finished look to your border. The slim face keeps attention on the glass while the smooth interior reduces stress points on edges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRounded edges — safer to handle and more polished appearance.\u003c\/li\u003e\n  \u003cli\u003eConsistent profile — uniform lines around panels for a professional look.\u003c\/li\u003e\n  \u003cli\u003eSubtle profile — ideal for delicate or detailed glasswork.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much material do I get and how is it packaged?\u003c\/h3\u003e\n\u003cp\u003eEach purchase includes twelve straight strips, each 3 feet long, giving a combined length of 36 feet. Strips are packed to protect their shape and finish so they arrive ready for measuring, cutting, and fitting into your project.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12 strips x 3 ft = 36 ft total length — enough for multiple small panels or several trim runs.\u003c\/li\u003e\n  \u003cli\u003eIndividual straight lengths — easy to square and join at corners.\u003c\/li\u003e\n  \u003cli\u003eSturdy packaging — reduces bending or kinks in transit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Makers, hobbyists, and professionals who need a reliable, low-profile framing option will find this Precizex U zinc came useful. It suits anyone building or repairing stained glass panels where a neat edge, workable metal, and corrosion resistance matter. If you want predictable dimensions, smooth edges, and enough length for multiple small projects or a few larger panels, this came provides a practical, craft-friendly solution without heavy industrial weight.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this 1\/8\" face came hold standard stained glass thickness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 5\/32\" channel accommodates most common hobby glass thicknesses; check your glass dimensions before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I cut and solder this zinc came with typical stained glass tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It cuts with glass came cutters and hacksaws and accepts solder and cement for finished joins.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Precizex","offers":[{"title":"Default Title","offer_id":55297237811537,"sku":"B0F9K9Y5B4","price":54.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/precizex-front-packaging-views.jpg?v=1791950791"},{"product_id":"crafters-best-copper-foil-7-32-black-back-36yd-dead-soft-strong-adhesive-for-stained-glass","title":"Crafter's Best Copper Foil 7\/32\" Black Back 32.9 m — Dead-Soft, Strong Adhesive for Stained Glass","description":"\u003cp\u003e\u003cstrong\u003eCrafter's Best Edco 7\/32\" Black Back Copper Foil is a 36-yard roll of dead-soft, black-lined copper foil with industry-leading adhesive for neat, durable solder seams on clear glass and mirrors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis copper foil is designed for stained glass work and mirror edging where a concealed, tidy solder line matters. The internal black core hides the raw copper look under the solder while the strongest adhesive in its category keeps the foil firmly attached through cutting, shaping and assembly. The dead-soft temper makes it easier to wrap around curves and irregular shapes without tearing, and the 36-yard length gives you enough material for multiple projects or larger panels.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the black back help my finished stained-glass pieces?\u003c\/h3\u003e\n\u003cp\u003eThe black-lined core conceals the foil beneath solder, producing a darker, less reflective joint that blends with shadowed areas. This reduces visible copper tones after soldering and creates a more consistent, professional appearance on clear and mirrored glass.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInternal black core hides copper colour under solder\u003c\/li\u003e\n  \u003cli\u003eImproves visual consistency on clear or mirrored glass\u003c\/li\u003e\n  \u003cli\u003eHelps achieve a darker, less reflective seam without extra patina\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this foil stick well to glass edges and corners?\u003c\/h3\u003e\n\u003cp\u003eYes — the adhesive formulation is noted for exceptional tack, which holds the foil securely during assembly and soldering. That strong bond minimizes lifting or shifting at corners, so your foil stays in place while you burnish and solder.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustry-leading adhesive reduces re-taping and rework\u003c\/li\u003e\n  \u003cli\u003eReliable hold on glass edges and around corners\u003c\/li\u003e\n  \u003cli\u003eStable through handling, assembly, and soldering prep\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this foil easy to use on curved or intricate shapes?\u003c\/h3\u003e\n\u003cp\u003eAbsolutely — the foil is manufactured in a dead-soft copper temper that conforms smoothly to curves and tight contours. It wraps and burnishes without cracking, making it a practical choice for ornate panels, lamps, and three-dimensional projects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDead-soft copper for flexible wrapping and shaping\u003c\/li\u003e\n  \u003cli\u003e7\/32\" width balances coverage and control for most leaded seams\u003c\/li\u003e\n  \u003cli\u003eGood for both straight runs and detailed, curved sections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much material do I get and what glass types should I use it on?\u003c\/h3\u003e\n\u003cp\u003eThis product comes as a 36-yard roll of 7\/32\" (approximately 5.6 mm) foil — enough for multiple medium to large projects. It is intended for use on clear and non-opalescent glass, as well as mirrors; avoid opalescent or textured glass where the backing effect or adhesive performance may differ.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 36 yards per roll for extended project coverage\u003c\/li\u003e\n  \u003cli\u003eWidth: 7\/32\" (5.6 mm) fits common solder joint widths\u003c\/li\u003e\n  \u003cli\u003eRecommended for clear, non-opalescent glass and mirrors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Makers, hobbyists, and professional stained-glass artists who want a dependable, black-backed copper foil that hides raw copper tones, handles tight curves easily, and stays put during assembly. If you work on lamps, panels, mirror frames, or decorative glass where neat, darker solder lines matter, this 36-yard Crafter's Best Edco roll provides the material strength and flexibility required for clean, repeatable results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I solder directly over this black-backed copper foil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It accepts solder normally; the black core hides copper tones under the solder. Use standard flux and solder techniques for stained glass work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 7\/32\" width suitable for lampwork and small panels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: 7\/32\" is a versatile width for many panels and lamps; it balances coverage with control for most stained-glass seams.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Crafter's Best","offers":[{"title":"Default Title","offer_id":55297237680465,"sku":"B0BCBYVT2L","price":43.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/crafters-best-edco-copper-foil-roll-front-label.jpg?v=1791950785"},{"product_id":"precizex-1-2-u-zinc-came-for-stained-glass-12-3ft-36ft-pack-rust-resistant-with-smooth-edges","title":"Precizex 1\/2\" U Zinc Came for Stained Glass – 12×3ft (36ft) Pack, Rust-Resistant with Smooth Edges","description":"\u003cp\u003e\u003cstrong\u003ePrecizex 1\/2\" U Zinc Came is a durable, rust-resistant U-shaped zinc framing strip sold as twelve 3ft lengths (36ft total) designed to support, edge, and frame stained glass panels for hobbyists and professionals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re building a new stained glass panel, repairing a leaded window, or finishing an insert for a cabinet door, the right came makes installation easier and the finished artwork more stable. Precizex crafted this zinc came from a high-quality zinc alloy with smooth rounded edges and consistent channel dimensions so pieces sit securely while solder points and lead lines stay clean. The pack includes twelve 3-foot strips—enough for medium to large projects—delivering reliable rigidity without adding excessive weight.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this zinc came fit standard stained glass pieces?\u003c\/h3\u003e\n\u003cp\u003eThe U-shaped channel is sized to accept typical stained glass thicknesses and gives a snug, consistent hold along edges. Its 1\/2\" face and 5\/32\" channel depth provide ample surface for soldering and for securing the glass in the frame.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFace width: 1\/2\" for visible, decorative framing.\u003c\/li\u003e\n  \u003cli\u003eChannel width: 5\/32\" to accommodate standard glass thickness and thin lead line fills.\u003c\/li\u003e\n  \u003cli\u003eChannel depth: 3\/16\" for secure seating of glass edges.\u003c\/li\u003e\n  \u003cli\u003eStrip length: 3ft each, twelve strips for a total of 36ft of came.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this zinc came easy to cut, shape, and solder?\u003c\/h3\u003e\n\u003cp\u003eYes — the alloy composition balances stiffness with enough malleability for cutting and shaping with standard stained glass tools. Smooth, rounded edges reduce chipping while giving a clean surface for soldering and cementing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with a standard came cutter, hacksaw, or tubing cutter for precise cuts.\u003c\/li\u003e\n  \u003cli\u003eRounded edges minimize glass stress when fitting corners and curves.\u003c\/li\u003e\n  \u003cli\u003eFlat face offers a good surface for solder beads and finishing work.\u003c\/li\u003e\n  \u003cli\u003eNon-porous zinc surface accepts common patinas and finishes evenly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat projects is this pack best suited for?\u003c\/h3\u003e\n\u003cp\u003eThis 36-foot bundle covers many framing needs — perfect for single-panel windows, door inserts, smaller stained glass lamps, and repair jobs. The combination of length and cross-section makes it flexible enough for hobby pieces yet robust enough for decorative architectural elements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRepairing antique or leaded panels that need rigid replacement framing.\u003c\/li\u003e\n  \u003cli\u003eCreating new window panels or cabinet inserts with a finished zinc edge.\u003c\/li\u003e\n  \u003cli\u003eSmall to medium stained glass lamps and decorative panels.\u003c\/li\u003e\n  \u003cli\u003eStudio practice runs or classroom projects where consistent supply matters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I finish and maintain zinc came for long-lasting results?\u003c\/h3\u003e\n\u003cp\u003eAfter fitting and soldering, seal gaps with standard cement or putty and apply a patina if you want a darker finish. Zinc resists rust, but routine cleaning and avoiding harsh abrasives will preserve its look and structural integrity over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApply stained glass cement or epoxy to secure glass in the channel.\u003c\/li\u003e\n  \u003cli\u003eSolder seams at joints for mechanical strength and durability.\u003c\/li\u003e\n  \u003cli\u003eUse mild cleaner and soft cloths to remove flux and residue.\u003c\/li\u003e\n  \u003cli\u003eOptional patina or lacquer finish for aesthetic uniformity and protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Precizex 1\/2\" U Zinc Came is aimed at hobbyists, stained glass students, restoration craftsmen, and independent artisans who want a dependable, ready-to-cut framing solution. If you need consistent dimensional tolerances, smooth edges for neat soldering, and a full 36 feet of came to complete multiple or larger projects, this pack delivers the materials and flexibility to finish polished, long-lasting stained glass work.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What glass thickness fits this 5\/32\" channel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 5\/32\" channel fits standard stained glass sheets and thin lead line fills; use cement for snug fits with slightly smaller thicknesses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I solder directly to this zinc came?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the flat zinc face accepts solder; clean flux residue after soldering and apply cement and patina as desired.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Precizex","offers":[{"title":"Default Title","offer_id":55298526806353,"sku":"B0F9JZV9HF","price":99.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/precizex-front-packaging-precizex-zinc-came.jpg?v=1791967679"},{"product_id":"precizex-zinc-came-u-3-8-for-stained-glass-12-3ft-36ft-smooth-corrosion-resistant-framing","title":"Precizex Zinc Came U 3\/8\" for Stained Glass — 12×3ft (36ft) Smooth, Corrosion-Resistant Framing","description":"\u003cp\u003e\u003cstrong\u003ePrecizex 3\/8\" U Zinc Came is a durable, smooth-edged zinc framing strip sold as twelve 3‑foot pieces (36 feet total) designed to support and finish stained glass panels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese U-shaped zinc cames give stained glass projects a clean, sturdy channel for setting glass and soldering seams. Manufactured from a corrosion-resistant zinc alloy, each strip combines predictable dimensions with a polished appearance so hobbyists and professionals can frame, repair, or build panels with consistent results.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this zinc came fit standard stained glass pieces?\u003c\/h3\u003e\n\u003cp\u003eThe Precizex U zinc features measured channels that accept typical glass thicknesses used in hobby and decorative stained glass. Its consistent channel width and depth make it easy to plan layouts and ensure even solder joints along panel edges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFace width: 3\/8\" for visible trim and stability\u003c\/li\u003e\n  \u003cli\u003eOverall width: 1\/4\" for neat sightlines\u003c\/li\u003e\n  \u003cli\u003eChannel opening: 5\/32\" suitable for common glass thicknesses\u003c\/li\u003e\n  \u003cli\u003eDepth: 3\/16\" to hold glass securely during assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this zinc came easy to work with during assembly?\u003c\/h3\u003e\n\u003cp\u003eEach strip is rolled with smooth, rounded edges to reduce the need for extensive filing and to create a refined finished edge. The U-profile tracks straight and square when cut and soldered, helping maintain panel geometry through the build process.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEven alloy composition for predictable bending and soldering\u003c\/li\u003e\n  \u003cli\u003eRounded outer edges for minimal finishing work\u003c\/li\u003e\n  \u003cli\u003eUniform cross-section to simplify measuring and cutting\u003c\/li\u003e\n  \u003cli\u003eSold as 12 pieces of 3 ft each for manageable handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant is this zinc came?\u003c\/h3\u003e\n\u003cp\u003eThe zinc alloy used by Precizex is chosen to resist rust and surface degradation in indoor decorative applications. While not a sealed metal, zinc holds up well when compared to softer metals, giving long-lasting edge support when panels are displayed or installed indoors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy resists common indoor corrosion better than untreated iron\u003c\/li\u003e\n  \u003cli\u003eStable profile maintains shape under normal handling and soldering heat\u003c\/li\u003e\n  \u003cli\u003ePolished face keeps visual appeal for framed work\u003c\/li\u003e\n  \u003cli\u003eSuitable for both new builds and repairs of existing panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow many pieces are included and how does that help planning a project?\u003c\/h3\u003e\n\u003cp\u003eThis listing contains twelve 3‑foot strips, totaling 36 feet of zinc came, which lets you estimate runs for edging multiple small panels or a single larger frame. Buying in this bundled format reduces the number of separate purchases and ensures matching material across the whole job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12 strips × 3 ft = 36 ft of U zinc came\u003c\/li\u003e\n  \u003cli\u003eIdeal for several small windows, lamps, or one medium panel\u003c\/li\u003e\n  \u003cli\u003eConsistent batch reduces colour and texture variation\u003c\/li\u003e\n  \u003cli\u003eManageable strip length simplifies cutting and storage\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Precizex 3\/8\" U Zinc Came suits stained glass hobbyists, studio artisans, and repairers who want a reliable, easy-to-finish framing solution. If you assemble panels, craft decorative inserts, or restore leaded glass pieces, these pre-cut zinc strips provide predictable dimensions, smoother edges, and enough material to complete multiple projects without changing came type mid-build.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What glass thickness fits this U zinc came?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 5\/32\" channel accommodates common stained glass thicknesses; test-fit your glass before final soldering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I solder directly to this zinc came?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the alloy is suitable for soldering typical stained-glass techniques; use proper flux and a steady temperature.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Precizex","offers":[{"title":"Default Title","offer_id":55298750284113,"sku":"B0F9JTTNKT","price":93.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/precizex-front-packaging-zinc-came.jpg?v=1791969040"},{"product_id":"delphi-glass-1-8-flat-u-lead-came-spool-3-lb-54-ft-flat-bottom-profile-5-32-channel","title":"Delphi Glass 1\/8\" Flat U Lead Came Spool — 1.36 kg (≈16.5 m) Flat-Bottom Profile, 5\/32\" Channel","description":"\u003cp\u003e\u003cstrong\u003eDelphi Glass 3 lb Spooled 1\/8\" Flat U Lead Came is a convenient, space-saving spool of flat-bottom lead came—about 54 feet per spool—designed for easier dispensing and neater storage when building stained-glass panels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis spooled lead came replaces bulky boxes and tangled lengths with a tidy, easy-to-feed coil that helps you measure, cut and fit came faster. The profile is a Flat U (flat-bottom) with a 1\/8\" face and a standard 5\/32\" channel depth, commonly used by glass artists seeking a low-profile edge and clean sightlines. Each spool contains roughly 54 feet of came and weighs approximately 3 pounds, making it practical for both studio and on-site work.\u003c\/p\u003e\n\n\u003ch3\u003eHow does spooled lead came change the way I work?\u003c\/h3\u003e\n\u003cp\u003eSpooled came streamlines setup and reduces waste. Instead of untangling long lengths from a box or dealing with multiple short pieces, you pull exactly the amount you need, cut, and continue without stopping to reorganize materials.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick dispensing straight from the spool for continuous workflow.\u003c\/li\u003e\n  \u003cli\u003eLess wasted came compared with pre-cut or boxed lengths.\u003c\/li\u003e\n  \u003cli\u003eCompact storage saves bench and shelf space in busy studios.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes Flat U lead came different from Round U?\u003c\/h3\u003e\n\u003cp\u003eFlat U came has a flat bottom rather than a rounded trough, which changes how the glass sits and how visible the lead appears from the front. Many artists choose Flat U for a flatter sightline and a slightly slimmer profile around each glass edge.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlat bottom reduces bulging behind the glass for a cleaner back profile.\u003c\/li\u003e\n  \u003cli\u003e1\/8\" face offers a subtle lead line compared with wider faces.\u003c\/li\u003e\n  \u003cli\u003eStandard 5\/32\" channel accommodates typical glass thickness and foil depth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I measure, cut and fit this 5\/32\" channel spooled came?\u003c\/h3\u003e\n\u003cp\u003eMeasure from edge to edge just as you would with regular came; pull the needed length from the spool, score with your came knife, then cut with came shears or nippers. Stretching the came slightly after cutting helps it seat more snugly around irregular glass shapes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePull spool to desired length and cut with nippers or came shears.\u003c\/li\u003e\n  \u003cli\u003eUse slight stretching to fine-tune fit around curves and angles.\u003c\/li\u003e\n  \u003cli\u003eSolder and cement as usual—no change to standard finishing steps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much came do I get and is it suitable for large projects?\u003c\/h3\u003e\n\u003cp\u003eEach spool contains approximately 54 feet of 1\/8\" face Flat U came and weighs about 3 pounds. That length suits many small-to-medium panels and repair jobs; for very large projects you might buy multiple spools to maintain consistent batches and colour tones.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApprox. 54 feet per 3 lb spool for efficient mid-size projects.\u003c\/li\u003e\n  \u003cli\u003eConsistent profile and patina across the entire spool for uniform appearance.\u003c\/li\u003e\n  \u003cli\u003eEasy to store and transport between workspaces or job sites.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: glass artists, hobbyists and restoration professionals who prefer a tidier, more efficient supply method will appreciate the spooled format. If you want a low-profile, flat-bottom lead line with a 1\/8\" visible face and a standard 5\/32\" channel—ideal for slimmer sightlines and cleaner backs—this Delphi Glass spool is a practical choice. For large installations, purchase multiple spools to maintain consistent patina and profile across the entire project.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the face and channel size of this lead came?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It has a 1\/8\" visible face with a standard 5\/32\" channel, suitable for common stained-glass thicknesses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many feet of came are on the 3 lb spool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each 3 lb spool contains approximately 54 feet of Flat U lead came.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi Glass","offers":[{"title":"Default Title","offer_id":55299163914577,"sku":"B00HHCTZGE","price":94.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/delphi-glass-spool-front-view.jpg?v=1791971982"},{"product_id":"artkingto-u-zinc-came-for-stained-glass-framing-1-2-face-36ft-12x3ft-rust-resistant","title":"ARTKINGTO U Zinc Came for Stained Glass Framing — 1\/2\" Face, 36ft (12x3ft) Rust‑Resistant","description":"\u003cp\u003e\u003cstrong\u003eARTKINGTO 1\/2\" U zinc came is a durable U‑shaped zinc alloy channel designed to frame and finish stained glass panels cleanly and securely.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese 12 strips of U‑shaped zinc came (each 3 feet long, total 36 feet) give glassworkers a consistent, rust‑resistant framing option with a smooth rounded face and a narrow channel that holds glass edges accurately. The came is made of a zinc alloy that balances strength and workability, making it suitable for traditional leaded techniques where a rigid perimeter or internal U channel is needed. Use it to border finished panels, reinforce edges, or create a flush, neat appearance on display pieces.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this zinc came fit my stained glass panel edges?\u003c\/h3\u003e\n\n\u003cp\u003eThe U profile has a deep, narrow channel built to accept glass edges and small spacing materials while offering a neat rounded exterior face. Its 1\/2\" visible face and 5\/32\" channel width are shaped to cradle thin to medium glass reliably without excess bulk.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFace (visible): 1\/2\" for a balanced, finished look.\u003c\/li\u003e\n  \u003cli\u003eOverall width: 1\/4\" to minimize profile thickness.\u003c\/li\u003e\n  \u003cli\u003eChannel (internal slot): 5\/32\" to hold typical panel glass securely.\u003c\/li\u003e\n  \u003cli\u003eDepth: 3\/16\" gives sufficient bite on glass edges.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this came easy to cut and join during assembly?\u003c\/h3\u003e\n\n\u003cp\u003eZinc alloy came cuts cleanly with standard metal shears or a jeweler's saw and responds well to typical joinery methods used in stained glass work. The material is rigid enough to hold shape during soldering or mechanical fastening, yet workable for notching and miters at corners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: each strip is 3ft, manageable for cutting and handling.\u003c\/li\u003e\n  \u003cli\u003eWorkability: zinc alloy balances stiffness and malleability.\u003c\/li\u003e\n  \u003cli\u003eJoining: suitable for soldering and mechanical fixing at corners and seams.\u003c\/li\u003e\n  \u003cli\u003eFinishing: smooth rounded face reduces need for extensive filing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat projects benefit most from this U zinc came?\u003c\/h3\u003e\n\n\u003cp\u003eThis came is optimised for perimeter framing of stained glass panels, for internal channels that require a flush edge, and for craft or restoration projects where a slim, rounded metal border is desired. It's also a good choice when corrosion resistance is important in display or installation settings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFraming finished stained glass windows and panels.\u003c\/li\u003e\n  \u003cli\u003eCreating internal U channels or recessed edges.\u003c\/li\u003e\n  \u003cli\u003eRestoration projects needing a low‑profile, rust‑resistant came.\u003c\/li\u003e\n  \u003cli\u003eHobby and professional studio use—multiple 3ft strips supply continuous lengths.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePackage details and dimensions: you receive 12 pieces of U zinc came, each 3 feet long (totaling 36 feet). The cross-section measures a 1\/2\" face, 1\/4\" overall width, 5\/32\" channel, and 3\/16\" depth. The zinc alloy construction resists rust and holds up well during assembly and display.\u003c\/p\u003e\n\n\u003cp\u003eWho is this for? Glass artists, restorers, and hobbyists who need a neat, low‑profile metal frame or internal channel for stained glass panels will find this product practical. If you work with small to medium glass pieces and want a reliable, rust‑resistant came with a smooth rounded exterior—whether for shop production or personal projects—this set provides several manageable lengths for cutting, joining, and finishing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the total length and individual strip sizes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You get 12 strips, each 3 ft long, totaling 36 ft; face 1\/2\", width 1\/4\".\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this zinc came be soldered and cut with standard tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It cuts cleanly with metal shears and is suitable for soldering and typical joinery.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARTKINGTO","offers":[{"title":"Default Title","offer_id":55299164078417,"sku":"B0DXVVTDNF","price":99.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/artkingto-u-zinc-came-front-packaging.jpg?v=1791971987"},{"product_id":"huoyoger-zinc-came-u-channel-for-stained-glass-1-8-face-36-ft-12-3-ft-rust-resistant-easy-to-bend","title":"HUOYOGER Zinc Came U-Channel for Stained Glass, 1\/8\" Face — 36 ft (12×3 ft) Rust-Resistant, Easy-to-Bend","description":"\u003cp\u003e\u003cstrong\u003eHUOYOGER Zinc Came 1\/8\" U channel is a weather-resistant, easy-to-bend framing came sold as 12 strips of 3 ft (36 ft total), designed to build rigid, discreet frames for suncatchers, small panels, and delicate stained glass projects.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you make stained glass hangings, miniature panels, or crafty suncatchers, the HUOYOGER Zinc Came 1\/8\" gives you a lightweight but sturdy alternative to lead. This zinc U channel is dimensioned for precise joins, simple cutting and soldering, and resists sagging so your small artworks keep their intended shape over time. The pack provides a workshop-friendly quantity — twelve 3-foot lengths — so you can plan multiple projects without hunting for more material.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this zinc came perform when bending and shaping?\u003c\/h3\u003e\n\u003cp\u003eThe HUOYOGER zinc alloy balances stiffness and flexibility so you can form curves and straight edges with common hobby tools. It bends smoothly for tight suncatcher curves yet holds its shape after soldering, making assembly predictable even for intermediate hobbyists.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFace width: 1\/8\" for a subtle visible edge\u003c\/li\u003e\n  \u003cli\u003eOverall width: 1\/4\" to fit narrow glass borders\u003c\/li\u003e\n  \u003cli\u003eChannel depth: 3\/16\" to cradle thin glass pieces securely\u003c\/li\u003e\n  \u003cli\u003eWorks well with hand grozing pliers and small bending jigs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and how much material do I get?\u003c\/h3\u003e\n\u003cp\u003eThis kit contains twelve strips, each 3 feet long, totaling 36 feet of HUOYOGER zinc came. The precise dimensions let you estimate material needs and minimize waste when laying out patterns for small to medium-sized panels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTotal length: 36 feet (12 × 3 ft strips)\u003c\/li\u003e\n  \u003cli\u003eFace thickness: 1\/8\" for a refined edge appearance\u003c\/li\u003e\n  \u003cli\u003eChannel width: 5\/32\" to accommodate thin stained glass\u003c\/li\u003e\n  \u003cli\u003eDepth: 3\/16\" suitable for common hobby glass thicknesses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this suitable for outdoor pieces or hanging decorations?\u003c\/h3\u003e\n\u003cp\u003eHUOYOGER zinc came offers enhanced weather resistance compared with some softer metals, making it a reasonable choice for protected outdoor hangings or bright window suncatchers. For long-term exterior installations, pair with appropriate sealants and secure hanging hardware to reduce exposure-related wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant zinc alloy for reduced tarnishing\u003c\/li\u003e\n  \u003cli\u003eU channel design helps lock glass and solder joints in place\u003c\/li\u003e\n  \u003cli\u003eIdeal for indoor windows, porches, and sheltered outdoor displays\u003c\/li\u003e\n  \u003cli\u003eWorks as a lighter, less toxic alternative to lead came\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this came integrate into common stained glass techniques?\u003c\/h3\u003e\n\u003cp\u003eHUOYOGER zinc came adapts to standard stained glass workflows: cut to length, bend to shape, fit glass into the U channel, and solder joints to secure the framework. Its predictable profile reduces fiddly adjustments and helps create neat, consistent seams for small-scale art.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with soldering, cementing, and patina finishing\u003c\/li\u003e\n  \u003cli\u003eEasy to cut with a hacksaw or tubular cutting tools\u003c\/li\u003e\n  \u003cli\u003eHolds tight corners cleanly when mitered and soldered\u003c\/li\u003e\n  \u003cli\u003eSmooth face for even patina application and polished results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? HUOYOGER Zinc Came 1\/8\" U Channel is aimed at hobbyists, stained glass students, craft makers, and designers building suncatchers, small panels, or decorative inserts. If you need a predictable, easy-to-work framing came that reduces sag and simplifies soldering for delicate glass pieces, this set of 36 feet gives you a practical supply to complete multiple projects without overbuying.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I solder this zinc came like lead came?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — HUOYOGER zinc came solders cleanly with standard stained-glass soldering techniques and flux.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What glass thickness fits the channel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 3\/16\" channel depth accommodates common hobby glass sheets and thin panel glass securely.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HUOYOGER","offers":[{"title":"Default Title","offer_id":55299665723729,"sku":"B0FRMMNDQC","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/huoyoger-front-packaging-zinc-came.jpg?v=1791973517"},{"product_id":"delphi-glass-1-4-round-u-lead-came-3-lb-spool-13-64-channel-rounded-edge","title":"Delphi Glass 1\/4\" Round U Lead Came — 1.36 kg Spool, 13\/64\" Channel, Rounded Edge","description":"\u003cp\u003e\u003cstrong\u003eDelphi Glass 3 lb spooled 1\/4\" Round U lead came is a pre-wound supply of rounded-edge lead channel designed for clean, easy application to the exterior edges of decorative mirrors and glass art.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis spooled lead came simplifies storage, dispensing, and measuring so glassworkers spend less time untangling lengths and more time assembling. The came features a 1\/4\" face width, a standard 13\/64\" channel to accept glass thickness, and a reinforced rounded bottom for a finished look when soldered to the outside edge of mirrors and framed glass pieces. Each 3 lb spool contains approximately 34 feet of came, compacted for neat handling and straightforward cutting.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this spooled lead came speed up setup and storage?\u003c\/h3\u003e\n\u003cp\u003eWound on a spool, the came stays organized and ready to dispense in exact lengths without tangles. That reduces wasted material and keeps your workspace neat, making repeat jobs faster and less error-prone.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3 lb spool holds ~34 feet for fewer interruptions\u003c\/li\u003e\n  \u003cli\u003eSmooth unwind prevents twisting and kinks\u003c\/li\u003e\n  \u003cli\u003eEasy to measure and cut directly from the spool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key dimensions and how do they fit my glass?\u003c\/h3\u003e\n\u003cp\u003eThe came has a 1\/4\" face and a 13\/64\" internal channel designed to accommodate common glass and mirror thicknesses. The rounded U profile provides a robust exterior surface that adapts well to solder seams and decorative finishing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFace width: 1\/4\" for visible edge consistency\u003c\/li\u003e\n  \u003cli\u003eChannel width: 13\/64\" standard fit for many panels\u003c\/li\u003e\n  \u003cli\u003eRounded bottom offers a finished, professional appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this came applied on decorative mirrors and glass art?\u003c\/h3\u003e\n\u003cp\u003eThis U-profile is intended to be soldered to the outside edge of mirrors or decorative glass, reinforcing the perimeter and providing a polished border. Cut and stretch short lengths from the spool to fit curved or straight edges, then solder at joints for a secure, long-lasting finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStretch gently to follow contours and curves\u003c\/li\u003e\n  \u003cli\u003eCut to length and solder joints for secure adhesion\u003c\/li\u003e\n  \u003cli\u003eUse for exterior edging on mirrors and framed glass pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect in handling and finish quality?\u003c\/h3\u003e\n\u003cp\u003eThe thicker rounded bottom of this came gives a tactile, finished look once soldered and polished, improving both durability and aesthetics. Because it arrives on a spool, it resists accidental warping and stays ready for successive pieces in a production run.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRounded profile hides solder seams and blemishes\u003c\/li\u003e\n  \u003cli\u003eSturdy weight (3 lb) reduces flex on longer runs\u003c\/li\u003e\n  \u003cli\u003eCompact spool protects came during storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Delphi Glass 3 lb spooled 1\/4\" Round U lead came is aimed at stained-glass artisans, mirror framers, hobbyists, and small studios who want an efficient, tidy supply of exterior-edge came. It’s especially useful for projects that require multiple short runs or frequent changes of length — the spool format keeps material organized and reduces scrap while delivering a professional-looking external edge.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many feet of came are on this spool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 3 lb spool contains approximately 34 feet of 1\/4\" Round U lead came.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this came be soldered to mirror edges?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the rounded U profile is intended to be soldered to the outside edge of mirrors and decorative glass pieces.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi Glass","offers":[{"title":"Default Title","offer_id":55300711743825,"sku":"B00HHCU04A","price":93.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/delphi-glass-spool-front-view_e944184a-c545-45c6-abbc-440389ea9b1e.jpg?v=1791974768"},{"product_id":"delphi-glass-5-64-round-u-came-3-lb-spool-for-hobby-stained-glass-flexible-smooth-finish","title":"Delphi Glass 5\/64\" Round U Came — 1.36 kg Spool for Hobby Stained Glass, Flexible Smooth Finish","description":"\u003cp\u003e\u003cstrong\u003eDelphi Glass 3 lb spooled hobby came is a 5\/64\" round U-shaped lead came supplied on a spool for smooth, continuous stained glass framing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis spooled round U came is made for artisans and hobbyists who need a durable, flexible channel to hold glass pieces in place. The 5\/64\" profile balances strength with a refined appearance, and the spool format reduces interruptions from frequent joints so you can run longer lengths with cleaner results. Use it for panels, windows, lamps, and decorative projects where predictable shaping and neat soldering lines matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this round U came make assembly easier?\u003c\/h3\u003e\n\n\u003cp\u003eThe continuous spool eliminates many short lengths, so you spend less time joining came sections and more time assembling glass. Its rounded U profile guides glass edges into a secure fit while permitting slight adjustments during final layout. This leads to straighter sightlines and fewer touch-ups at solder points.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSpooled format reduces number of solder joints required.\u003c\/li\u003e\n  \u003cli\u003e5\/64\" round U channel fits common glass thicknesses used in hobby projects.\u003c\/li\u003e\n  \u003cli\u003eFlexible enough to follow gentle curves and straight runs alike.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat finishing and durability benefits does this came offer?\u003c\/h3\u003e\n\n\u003cp\u003eThe came is formed for a clean external finish that minimizes visible gaps between glass and lead. Its composition provides consistent softness for shaping while retaining enough body for long-term stability in framed work. Finished solder joints bond predictably to this profile, giving a professional-looking edge to completed pieces.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSmooth outer face for neat patina and solder coverage.\u003c\/li\u003e\n  \u003cli\u003eUniform channel depth improves adhesive and solder adhesion.\u003c\/li\u003e\n  \u003cli\u003eHolds shape under handling yet allows bending where needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich projects is the 5\/64\" size best suited for?\u003c\/h3\u003e\n\n\u003cp\u003eThe 5\/64\" (rounded U) profile is ideal for hobby and small-scale commercial work where a refined sightline and modest structural support are desired. It performs well in panels, decorative inserts, lamp shades, and picture frames that use standard hobby glass thicknesses. For heavy exterior glazing, consider heavier-profile came or additional support mechanisms.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDecorative panels and interior windows.\u003c\/li\u003e\n  \u003cli\u003eLamp and teardrop designs requiring curved runs.\u003c\/li\u003e\n  \u003cli\u003eArt pieces and continuous borders that benefit from long spool runs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I work with spooled came during construction?\u003c\/h3\u003e\n\n\u003cp\u003eMeasure and cut lengths as needed, but take advantage of the spool to run long straight sections with fewer joins. Use a rounded or mill-cutting tool to shape ends if needed, and keep a backing or bench pin to steady runs while soldering. Work conservatively when bending to avoid kinks; reheating or gentle reshaping can correct minor distortions before soldering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRun long lengths from the spool to reduce joints and solder points.\u003c\/li\u003e\n  \u003cli\u003eSupport the came on a bench pin when shaping and soldering.\u003c\/li\u003e\n  \u003cli\u003eTrim cleanly and file edges for tight, even joints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Delphi Glass 3 lb spooled 5\/64\" round U came is aimed at stained glass hobbyists, teachers, and small-studio artisans who want a reliable, easy-to-handle lead came with a refined profile. If you value smooth sightlines, fewer joints, and predictable behavior during bending and soldering, this spooled round U came is a practical choice for interior decorative work and detailed projects.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What size and shape is this came?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is a 5\/64\" diameter round U-shaped lead came supplied on a 3 lb spool, suited for standard hobby stained glass work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What projects work best with this spooled came?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Ideal for decorative panels, lamps, and continuous borders where fewer solder joints and smooth sightlines are desired.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi Glass","offers":[{"title":"Default Title","offer_id":55302636306769,"sku":"B00HHCTZ28","price":95.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/delphi-glass-spool-front-view_79d065c3-ae01-44e3-8544-e14b35028dd8.jpg?v=1791982925"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/collections\/delphi-glass-spool-front-view_79d065c3-ae01-44e3-8544-e14b35028dd8.jpg?v=1792143631","url":"https:\/\/craftiche.co.uk\/collections\/lead-came-copper-foil.oembed?page=3","provider":"Craftiche","version":"1.0","type":"link"}