{"title":"Heat Press Accessories","description":"\u003cp\u003e160 products from 92 brands, including VCHOMY, VEVOR and GEKIXUTP. Prices run from £29.19 to £586.79, including VAT. \u003c\/p\u003e\u003cp\u003ePart of our \u003ca href=\"\/collections\/printmaking\"\u003eprintmaking \u0026amp; screen printing\u003c\/a\u003e department. \u003c\/p\u003e","products":[{"product_id":"mebmik-heat-transfer-tape-20mm-x-33m-4-rolls-high-temp-polyimide-tape-250-c-resistant-no-residue-peel","title":"MEBMIK Heat Transfer Tape 20mm x 33m — 4 Rolls High-Temp Polyimide Tape, 250°C Resistant, No-Residue Peel","description":"\u003cp\u003e\u003cstrong\u003eMEBMIK heat transfer tape is a high-temperature polyimide tape sold in a set of four rolls, designed to hold materials in place during heat press and sublimation without leaving residue.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis tape is engineered for heat-transfer applications where adhesive stability and clean removal matter. Each roll measures 20mm (0.78 inch) wide by 33m (108 ft) long and withstands temperatures up to 250°C, making it suitable for most heat press and sublimation workflows. The tawny-coloured polyimide film features a heat-resistant adhesive that peels away easily after pressing, reducing cleanup time and protecting your finished pieces.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tape perform under high heat?\u003c\/h3\u003e\n\u003cp\u003eThe tape uses a polyimide film backing with a high-temperature rated adhesive to maintain grip at press temperatures. It resists melting and adhesive breakdown, so it stays intact during typical heat transfer cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated heat resistance up to 250°C (482°F)\u003c\/li\u003e\n  \u003cli\u003ePolyimide film backing prevents warping or melting\u003c\/li\u003e\n  \u003cli\u003eAdhesive designed to hold through heat cycles without transferring glue\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it remove cleanly after a press?\u003c\/h3\u003e\n\u003cp\u003eYes — the formulation prioritizes clean release so the tape can be peeled off without leaving sticky residue on fabric or vinyl. That makes post-press finishing faster and reduces the risk of ruined transfers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEasy-peel adhesive minimizes leftover tack\u003c\/li\u003e\n  \u003cli\u003eLeaves no visible residue on most substrates\u003c\/li\u003e\n  \u003cli\u003eWorks well with heat transfer vinyl and sublimated prints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the dimensions and how many rolls are included?\u003c\/h3\u003e\n\u003cp\u003eEach roll is 20mm wide and 33m (108 ft) long, providing extensive length for repeated projects. The package contains four separate rolls so you can keep one at each workstation or replace rolls frequently without running out mid-job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWidth: 20mm \/ 0.78 inch\u003c\/li\u003e\n  \u003cli\u003eLength per roll: 33m \/ 108 ft\u003c\/li\u003e\n  \u003cli\u003eQuantity: 4 rolls per package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich materials is this tape best for?\u003c\/h3\u003e\n\u003cp\u003eThe tape is formulated for use with heat press, heat sublimation, and heat transfer vinyl (HTV) processes. It holds paper, vinyl, fabric, and transfer sheets securely during pressing while avoiding adhesive transfer to the substrate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with HTV and sublimation papers\u003c\/li\u003e\n  \u003cli\u003eWorks on cotton, polyester blends, and many synthetics\u003c\/li\u003e\n  \u003cli\u003eAlso useful for masking or holding stencils during high-heat applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: MEBMIK's heat transfer tape suits hobbyists, small garment printers, craft-business owners, and production shops that need reliable, high-temperature masking and holding during heat presses. If you perform regular sublimation or vinyl application and want tape that withstands heat without residue, this four-roll pack provides a cost-effective supply for repetitive projects.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this tape withstand commercial heat press temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The tape is rated to 250°C (482°F), suitable for most commercial and home heat press cycles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it leave adhesive residue on garments?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The polyimide adhesive is designed to peel off cleanly and not leave visible residue on common fabrics.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MEBMIK","offers":[{"title":"Default Title","offer_id":55249027301713,"sku":"B09YM3KLJQ","price":30.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/mebmik-front-packaging-4-rolls.jpg?v=1791631969"},{"product_id":"ruclles-heat-press-cover-for-15x15-automatic-presses-20-16-12-inch-black-waterproof-nylon-dustproof","title":"ruclles Heat Press Cover for 15x15 Automatic Presses — 20×16×12 Inch Black Waterproof Nylon, Dustproof","description":"\u003cp\u003e\u003cstrong\u003eRuclles Heat Press Cover is a waterproof, dustproof nylon protective cover sized 20\"×16\"×12\" designed to shield 15\"×15\" automatic heat press machines from dust, splashes, and everyday wear.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your heat press looking and performing like new with a purpose-built cover that fits common 15\"×15\" automatic presses. Made from durable nylon with edge-wrapped stitching and a convenient handle, the Ruclles cover combines simple, foldable storage with solid protection against dust, moisture, and light splatter. It’s a practical accessory for hobbyists and small production shops who want a low-effort way to reduce cleaning time and protect equipment investment.\u003c\/p\u003e\n\n\u003ch3\u003eWill this cover fit my 15\"×15\" automatic heat press?\u003c\/h3\u003e\n\u003cp\u003eYes — the Ruclles cover is sized for most 15\"×15\" automatic heat press machines. The external dimensions (20\" L × 16\" W × 12\" H) allow room for typical control panels, handles, and small protrusions while delivering full coverage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExternal dimensions: 20\" length × 16\" width × 12\" height.\u003c\/li\u003e\n  \u003cli\u003eDesigned to fit standard 15\"×15\" automatic presses with room for controls.\u003c\/li\u003e\n  \u003cli\u003eConfirm your machine’s overall dimensions before purchase for best fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the material protect my equipment?\u003c\/h3\u003e\n\u003cp\u003eThe cover is crafted from high-quality nylon that resists dust and light liquid splashes, helping prevent grime build-up and surface stains. Its moisture-resistant finish reduces the chance of small spills reaching controls or metal parts while the tightly-woven fabric blocks airborne dust particles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWaterproof nylon resists spills and splashes.\u003c\/li\u003e\n  \u003cli\u003eDustproof weave minimizes dust accumulation on sensitive components.\u003c\/li\u003e\n  \u003cli\u003eEdge-wrapped sewing reinforces seams for extended protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it easy to use and store daily?\u003c\/h3\u003e\n\u003cp\u003eYes — the cover includes a sewn-in handle for quick placement or removal, and it compresses flat for compact storage when not in use. The design lets you cover your machine between jobs with minimal fuss, saving cleaning and maintenance time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSewn handle for one-handed lifting and positioning.\u003c\/li\u003e\n  \u003cli\u003eLightweight and foldable — stores flat in a drawer or shelf.\u003c\/li\u003e\n  \u003cli\u003eNeat, edge-wrapped stitching keeps the cover looking sharp after repeated use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the Ruclles dust cover?\u003c\/h3\u003e\n\u003cp\u003eBuilt with reinforced edge stitching and robust nylon, the cover stands up to routine use in home studios and small workshops. The craftsmanship focuses on long-lasting seams and fabric strength so the cover resists fraying and maintains protective performance over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEdge-wrapped sewing for stronger, neater seams.\u003c\/li\u003e\n  \u003cli\u003eHigh-quality nylon resists daily wear and tear.\u003c\/li\u003e\n  \u003cli\u003eMaintains shape and protective ability after repeated folding and handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Ruclles Heat Press Cover suits home hobbyists, small-business garment printers, and anyone who uses a 15\"×15\" automatic press and wants to reduce cleaning time, protect electronics and surfaces from dust and occasional splashes, and extend the lifespan of their equipment with a compact, easy-to-use cover.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this cover outdoors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s moisture-resistant for incidental splashes but not intended for prolonged outdoor exposure or heavy rain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the cover fit presses with digital control panels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 20×16×12 size accommodates most control panels and small protrusions on 15×15 presses.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ruclles","offers":[{"title":"Default Title","offer_id":55249123017041,"sku":"B0D8VR6DGM","price":29.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/ruclles-front-view-cover-on-heat-press.jpg?v=1791632963"},{"product_id":"vchomy-12x15-inch-heat-press-teflon-platen-wrap-pair-non-stick-high-heat-resistant-protector","title":"VCHOMY 12x15 Inch Heat Press Teflon Platen Wrap Pair — Non-Stick, High-Heat Resistant Protector","description":"\u003cp\u003e\u003cstrong\u003eVCHOMY’s 12x15-inch Teflon platen wrap is a two-piece, high-temperature, non-stick cover that protects your heat press plates from inks, adhesives, and wear while improving release during transfers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you use a 12 x 15 inch heat press for sublimation, HTV, or heat transfers, this platen wrap set provides a simple barrier between your work and the press. The covers combine an elastic polyester backing with a heat-resistant Teflon-fiberglass surface so they slip on quickly, resist sticking up to 500°F, and clean up with a damp cloth. They’re sold as a pair so you can cover both an upper platen and a suitable lower platen (note: not compatible with lower platens that have a front handle).\u003c\/p\u003e\n\n\u003ch3\u003eWill this 12x15 cover fit my heat press platen?\u003c\/h3\u003e\n\n\u003cp\u003eMeasure your platen before ordering: the wrap is designed for platens that match the 12 x 15 inch size. Because the wrap uses an elastic fabric backing, it fits snug platens of the specified dimensions but may show slight wrinkles at the corners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm platen measurement equals 12\" x 15\" (edge to edge).\u003c\/li\u003e\n  \u003cli\u003eElastic polyester backing stretches to accommodate minor shape differences.\u003c\/li\u003e\n  \u003cli\u003eLoose corners or small wrinkles do not impair performance.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for lower platens with a front handle; those may interfere with fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow hot can the VCHOMY Teflon wrap safely handle?\u003c\/h3\u003e\n\n\u003cp\u003eThe Teflon-fiberglass surface is formulated for high-heat transfer work and withstands temperatures commonly used for HTV and sublimation. It resists adhesive transfer and discoloration under normal heat press settings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for use up to approximately 500°F (260°C).\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated cycles; estimated long-term durability up to hundreds of uses.\u003c\/li\u003e\n  \u003cli\u003eProtects surfaces from inks, glues, and melted residues during transfers.\u003c\/li\u003e\n  \u003cli\u003eAvoid use on incompatible lower platens with obstructions or front handles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and clean the platen cover?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is quick: stretch the elasticized polyester backing over the platen and smooth the Teflon surface. Cleaning is straightforward — a damp cloth removes most transfer residues, keeping the surface non-stick and ready for the next job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlip cover on while platen is cool; align edges and tuck corners as needed.\u003c\/li\u003e\n  \u003cli\u003eWipe with a damp cloth; mild detergent for stubborn residue if necessary.\u003c\/li\u003e\n  \u003cli\u003eAvoid abrasive scrubbing which could damage the Teflon coating.\u003c\/li\u003e\n  \u003cli\u003eStore flat when not in use to minimize permanent creasing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this wrap and how many covers do I get?\u003c\/h3\u003e\n\n\u003cp\u003eThis listing includes two 12x15 wraps so you can protect both an upper platen and a compatible lower platen. Constructed with reinforced materials, the covers are intended for long-term use under routine transfer conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo covers per pack—use on upper and appropriate lower platens.\u003c\/li\u003e\n  \u003cli\u003ePremium Teflon-fiberglass surface resists sticking and tearing.\u003c\/li\u003e\n  \u003cli\u003eManufacturer guidance estimates durability across many cycles when used properly.\u003c\/li\u003e\n  \u003cli\u003eInspect periodically for wear and replace if the non-stick surface degrades.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: crafters, small business owners, and hobbyists who run heat presses for sublimation, HTV, or transfer printing and want a reliable, easy-to-fit barrier to protect platen surfaces, silicone pads, and finished work. If you need a protective cover for a 12 x 15 inch platen and your lower platen has no front handle, this two-pack offers a simple, cost-effective upgrade to keep transfers clean and platen parts longer-lasting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these covers on both the top and bottom platen?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the two-pack can protect an upper platen and a compatible lower platen, but they don’t fit lower platens that have a front handle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I clean the Teflon platen wrap?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Wipe with a damp cloth for most residue; use mild detergent for tougher buildup. Avoid abrasive scrubs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VCHOMY","offers":[{"title":"Default Title","offer_id":55250155143505,"sku":"B0DXP6P1DQ","price":30.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/vchomy-front-view-12x15-platen-wrap.jpg?v=1791637812"},{"product_id":"billbotk-sublimation-ornament-blanks-35-pack-2-76in-double-sided-mdf-discs-with-pre-drilled-hole","title":"Billbotk Sublimation Ornament Blanks 35-Pack — 2.76in Double-Sided MDF Discs with Pre-Drilled Hole","description":"\u003cp\u003e\u003cstrong\u003eBillbotk 35 Pieces Sublimation Ornament Blanks are double-sided, 2.76-inch round MDF discs pre-coated for sublimation to make personalised Christmas tree decorations, gift tags, and keepsakes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese ready-to-print ornament blanks come in a bulk set of 35, sized for small trees, gift accents, or craft projects. Each disc is laser-cut from durable MDF, coated on both faces for sublimation transfer, and protected with a peel-off film so they arrive scratch-free. They’re lightweight, have a pre-drilled hanging hole, and are sized to work with most hobby heat presses and mug\/plate attachments.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I apply my design to these sublimation ornament blanks?\u003c\/h3\u003e\n\u003cp\u003ePrint your artwork in mirror image on sublimation paper, secure it to the ornament surface with heat-resistant tape, and use a heat press or compatible attachment at the recommended settings. After pressing and cooling, remove the transfer paper and protective film to reveal the finished image.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended press: 356°F (180°C), 40 seconds, medium pressure\u003c\/li\u003e\n  \u003cli\u003eSurface: double-sided sublimation coating for full-coverage prints\u003c\/li\u003e\n  \u003cli\u003eProtection: peel-off protective film on both faces during handling\u003c\/li\u003e\n  \u003cli\u003eFinishing: allow to cool fully before peeling and attaching hangers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the size, material, and build details of these ornament blanks?\u003c\/h3\u003e\n\u003cp\u003eEach ornament measures 7.0 cm (2.76 inches) across with a 3 mm (0.12 inch) thickness. They’re made of smooth MDF with laser-cut edges that are sanded for a clean finish. The material balances durability and lightness, so decorations hang well without weighing down branches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDiameter: 2.76 inches (7.0 cm)\u003c\/li\u003e\n  \u003cli\u003eThickness: 3 mm (0.12 inch)\u003c\/li\u003e\n  \u003cli\u003eMaterial: MDF with sublimation coating on both sides\u003c\/li\u003e\n  \u003cli\u003eEdge finish: laser-cut and polished for smoothness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow many come in the pack and what projects can I make with them?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains 35 ornament blanks—enough for decorators, small craft businesses, or group activities. Use them for personalised Christmas tree décor, wedding favours, bag tags, place cards, or promotional keepsakes. Their double-sided coating lets you print different designs on each face for two-sided displays.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePack size: 35 pieces—great for gifting or selling finished ornaments\u003c\/li\u003e\n  \u003cli\u003eCommon uses: holiday trees, party favours, retail gifts, craft fairs\u003c\/li\u003e\n  \u003cli\u003eVersatility: double-sided printing for reversible designs\u003c\/li\u003e\n  \u003cli\u003eAccessory-ready: pre-drilled hole for ribbons, cords, or hooks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these ornaments easy for beginners and compatible with my equipment?\u003c\/h3\u003e\n\u003cp\u003eYes—these blanks are beginner-friendly thanks to clear size specs, protective films, and standard sublimation coatings. They work with most flat press plates and smaller clamp-style attachments; always test one blank to dial in temperature, time, and pressure for your specific machine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBeginner tip: remove protective film after pressing to avoid smudging\u003c\/li\u003e\n  \u003cli\u003eEquipment: compatible with flat heat presses and small-format attachments\u003c\/li\u003e\n  \u003cli\u003eTesting: run a trial on one ornament to optimize settings before batch work\u003c\/li\u003e\n  \u003cli\u003eHandling: keep blanks dry and peel protective film only when ready to print\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Crafters, makers, small-business owners, and families who want an affordable bulk supply of printable ornament blanks. The Billbotk 35-piece set suits hobbyists planning seasonal projects, event organisers making custom favours, and entrepreneurs producing personalised gifts at scale. If you need consistent, double-sided sublimation-ready discs that are pre-cut, coated, and ready to press, this kit streamlines production while leaving room for creative customization.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperature and time should I use for sublimation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use 356°F (180°C) for 40 seconds with medium pressure; test one ornament first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these ornaments ready to hang after printing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each blank includes a pre-drilled hole; add ribbon or a hook after printing and peeling film.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Billbotk","offers":[{"title":"Default Title","offer_id":55250766037329,"sku":"B0BHGQ7MXG","price":29.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/billbotk-front-packaging-ornaments.jpg?v=1791639744"},{"product_id":"vchomy-heat-press-mat-15x15-inch-double-sided-insulated-pad-428-f-heat-resistance","title":"VCHOMY Heat Press Mat 15x15 inch - Double-Sided Insulated Pad, 220 °C Heat Resistance","description":"\u003cp\u003e\u003cstrong\u003eThe VCHOMY Heat Press Mat is a 15x15-inch, double-sided heat-resistant pad that protects surfaces and evens out pressure for HTV, sublimation, and iron-on projects.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you use a Cricut EasyPress, a 15x15 heat press, or a household iron, the right base makes the difference between an uneven transfer and a clean, consistent finish. This upgraded mat is thicker than standard pads, offers insulation on both faces, and is lightweight enough to move between workstations or take to crafting classes.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this mat protect my work surface during heat transfers?\u003c\/h3\u003e\n\u003cp\u003eThe VCHOMY mat provides a thermal barrier up to 428°F (220°C), keeping tables and countertops safe from excessive heat and steam exposure. Its dense 0.7-inch thickness absorbs heat and reduces the chance of scorching or warping beneath your project.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat resistance rating up to 428°F (220°C)\u003c\/li\u003e\n  \u003cli\u003e0.7-inch thick foam layer disperses heat\u003c\/li\u003e\n  \u003cli\u003eDouble-sided protection means either face can shield your surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this mat help me get more consistent pressure and transfers?\u003c\/h3\u003e\n\u003cp\u003eThe cushioned, slightly elastic surface evens out pressure across garments and materials, reducing hot or cold spots that cause poor adhesion. That consistent give is particularly helpful with uneven fabrics, seams, or bulky seams on garments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSoft, uniform surface improves contact between heat platen and material\u003c\/li\u003e\n  \u003cli\u003eMinimizes pressure variation around seams and zippers\u003c\/li\u003e\n  \u003cli\u003eIdeal for HTV, iron-ons, sublimation blanks, and delicate fabrics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the upgraded both-side design useful in everyday crafting?\u003c\/h3\u003e\n\u003cp\u003eUnlike single-sided mats, this version has heat-resistant properties on both faces so you can flip it for even wear and longer life. That versatility lets you adapt the mat to different tasks—use one face for heavy pressing and flip it for light, delicate work without losing protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBoth faces engineered for heat resistance and durability\u003c\/li\u003e\n  \u003cli\u003eFlip to extend mat lifespan and rotate wear patterns\u003c\/li\u003e\n  \u003cli\u003eWorks interchangeably with irons, EasyPress models, and manual presses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable and convenient is the VCHOMY 15x15 mat for hobbyists and small businesses?\u003c\/h3\u003e\n\u003cp\u003eAt roughly 15 by 15 inches, this mat balances work area with portability, fitting most 15x15 heat presses while still being easy to store or carry. It’s lightweight yet resilient, designed for makers who move between home, market stalls, or workshops.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact 15\" x 15\" size compatible with most small presses\u003c\/li\u003e\n  \u003cli\u003eLightweight construction for easy transport and storage\u003c\/li\u003e\n  \u003cli\u003eDurable materials that withstand repeated pressing sessions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The VCHOMY Heat Press Mat is made for crafters, small-batch apparel makers, and hobbyists who press HTV, sublimation prints, or iron-on transfers and want reliable surface protection plus improved pressure distribution. It’s also a good pick for classroom settings, craft fairs, or mobile pop-up shops where a portable, durable heat-safe base is essential.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this mat safe for use with a 15x15 Cricut EasyPress?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 15x15 size matches most 15x15 EasyPress models and withstands temperatures up to 428°F (220°C).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use both sides of the VCHOMY mat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The upgraded design is heat resistant on both faces so you can flip it to extend lifespan.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VCHOMY","offers":[{"title":"Default Title","offer_id":55250811027793,"sku":"B0D8B1J1KD","price":30.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/vchomy-front-view-packaging.jpg?v=1791640194"},{"product_id":"billbotk-3-sublimation-ornament-blanks-30-pack-round-3-double-sided-mdf-discs-for-diy-christmas-crafts","title":"Billbotk 3\" Sublimation Ornament Blanks — 30-Pack Round 3\" Double-Sided MDF Discs for DIY Christmas Crafts","description":"\u003cp\u003e\u003cstrong\u003eBillbotk 3\" Sublimation Ornament Blanks are a 30-piece set of double-sided, 3-inch round MDF discs pre-coated for sublimation so you can create personalised holiday ornaments, tags, and keepsakes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese ornament blanks arrive ready for custom transfer printing: each disc measures 3 inches (7.6 cm) across, is 3 mm thick, and is protected by removable film on both faces. The blanks are laser-cut from lightweight, durable MDF and polished at the edges for a smooth finish that accepts sublimation inks. Designed for small-batch crafters, gift makers, and event decorators, the set includes thirty pieces so you can produce multiple designs, gifts, or party favours at once.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I sublimate designs onto these ornaments?\u003c\/h3\u003e\n\u003cp\u003ePrepare your artwork reversed for sublimation, print on appropriate transfer paper, and apply with a heat press or mug press set to recommended settings. The protective film should be removed before pressing; follow time and temperature guidelines to transfer crisp, vibrant images to both sides.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended press: heat press or small mug press\u003c\/li\u003e\n  \u003cli\u003eSuggested settings: 356°F (180°C), 40 seconds, medium pressure\u003c\/li\u003e\n  \u003cli\u003eRemove protective film before pressing\u003c\/li\u003e\n  \u003cli\u003ePrint designs mirrored on sublimation paper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical features and durability of these blanks?\u003c\/h3\u003e\n\u003cp\u003eThe ornaments are cut from moderately dense MDF that balances light weight and stiffness so they hang straight on a tree yet resist warping. The double-sided sublimation coating delivers good ink adhesion for vivid colour transfer, while the laser-cut edges are smoothed for a professional look.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDiameter: 3 inches (7.6 cm); thickness: 3 mm (0.12 in)\u003c\/li\u003e\n  \u003cli\u003eMDF core with double-sided sublimation coating\u003c\/li\u003e\n  \u003cli\u003eLaser-cut edges, polished for smoothness\u003c\/li\u003e\n  \u003cli\u003eProtective film included on both faces to prevent scratches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat craft projects and uses work best with these ornament blanks?\u003c\/h3\u003e\n\u003cp\u003eTheir round shape and hanging hole make them ideal for Christmas tree ornaments, personalised gift tags, bag tags, and event favours. Because each disc is blank on both sides, you can print matching or different artwork on each face for two-sided personalisation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChristmas tree decorations and keepsakes\u003c\/li\u003e\n  \u003cli\u003eGift tags, name tags, backpack charms\u003c\/li\u003e\n  \u003cli\u003eWedding or party favours with custom logos or names\u003c\/li\u003e\n  \u003cli\u003eRetail display or seasonal product samples\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow many will I get and how do I prepare them for finishing?\u003c\/h3\u003e\n\u003cp\u003eThe pack contains thirty blank ornaments so you can produce sets or share blanks within a crafting group. Each piece includes a pre-drilled hole for hanging; remove the protective film, align your transfer, and use the recommended press settings to finish reliably.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePack includes 30 round ornament blanks\u003c\/li\u003e\n  \u003cli\u003eEach ornament has a drilled hanging hole for ribbon or hook\u003c\/li\u003e\n  \u003cli\u003ePeel off protective film immediately before sublimation\u003c\/li\u003e\n  \u003cli\u003eAllow ink to cool before adding ribbons or packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Billbotk 3\" Sublimation Ornament Blanks are suited to hobby crafters, small-batch makers, craft-class instructors, and small retailers who want an economical way to produce consistent, double-sided custom ornaments. If you make seasonal merchandise, personalised gifts, or party favours and already use sublimation equipment, this 30-piece set gives enough blanks to experiment and produce finished products without buying single pieces.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these ornaments ready for sublimation right out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each ornament has a protective film on both sides; peel it off before sublimation and use the recommended press settings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What press settings work best for these MDF blanks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Try 356°F (180°C) for 40 seconds with medium pressure; adjust slightly by press model and transfer paper.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Billbotk","offers":[{"title":"Default Title","offer_id":55250879447377,"sku":"B0BKL5138N","price":30.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/billbotk-front-packaging-ornaments_1893a2a0-7246-4bf6-905b-e29c1b2f9447.jpg?v=1791640607"},{"product_id":"dudusub-sublimation-heat-transfer-film-a5-10-pack-5-86-9-56-flexible-matte-coating-for-curved-flat-blanks","title":"DUDUSUB Sublimation Heat Transfer Film A5+ 10-Pack (5.86×9.56\") — Flexible Matte Coating for Curved \u0026 Flat Blanks","description":"\u003cstrong\u003eDUDUSUB Sublimation Heat Transfer Film is a 10-sheet A5+ pack designed to deliver vivid, durable transfers on both flat and curved coated substrates.\u003c\/strong\u003e\n\n\u003cp\u003eMade for makers and small production shops, this A5-sized transfer film balances precision and economy: the matte-coated side accepts sublimation ink for accurate colour reproduction, while the thin, flexible backing conforms to curved items like phone and earphone cases. Each pack contains 10 sheets (5.86\" × 9.56\") so you can maximize material use for small blanks without excessive trimming.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this film perform on curved objects?\u003c\/h3\u003e\n\u003cp\u003eThe film is engineered to flex and cling during heat pressing, making it suitable for 3D sublimation on gently curved surfaces. It maintains crisp details and colour integrity even where the substrate bends.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlexible coating reduces lifting or cracking during transfer\u003c\/li\u003e\n  \u003cli\u003eWorks well with phone cases, coated keycaps, mugs, and earphone cases\u003c\/li\u003e\n  \u003cli\u003eProduces edge-to-edge coverage on small curved blanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat print setup is required for best results?\u003c\/h3\u003e\n\u003cp\u003ePrint with any compatible inkjet printer loaded with sublimation ink, using mirror mode for designs so they transfer correctly. Print onto the matte (front) side, then apply heat according to your substrate’s recommended time and temperature.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse sublimation ink only—standard ink won’t transfer properly\u003c\/li\u003e\n  \u003cli\u003eMirror your artwork before printing for correct orientation\u003c\/li\u003e\n  \u003cli\u003eEnsure even pressure and recommended heat settings during pressing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much material do I get and how efficient is it?\u003c\/h3\u003e\n\u003cp\u003eThis pack supplies ten A5+ sheets (5.86\" × 9.56\"), a size chosen to reduce trimming for small projects and waste for frequent small-format transfers. It’s an economical option for testing designs and short production runs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10 sheets per pack—good for prototypes and small batches\u003c\/li\u003e\n  \u003cli\u003eA5+ footprint minimizes offcuts compared with larger sheets\u003c\/li\u003e\n  \u003cli\u003eSized for common small blanks to maximize yield\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store unused sheets to preserve quality?\u003c\/h3\u003e\n\u003cp\u003eKeep unused sheets in their resealable bag and store them away from heat, humidity, and direct sunlight. Proper storage preserves the coated surface so transfers remain consistent over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReturn sheets to original sealed packaging after opening\u003c\/li\u003e\n  \u003cli\u003eStore flat in a cool, dry place to avoid warping or moisture uptake\u003c\/li\u003e\n  \u003cli\u003eAvoid exposure to direct sunlight or heat sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? DUDUSUB’s A5+ sublimation heat transfer film is aimed at hobbyists, small business owners, and crafters making personalised phone cases, small coated accessories, or test prints. If you need a compact, easy-to-use transfer medium that works with inkjet sublimation systems and fits small blanks without excessive trimming, this 10-sheet pack provides a practical, reliable option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this paper with any inkjet printer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, use an inkjet printer loaded with sublimation ink; standard inks will not transfer correctly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this suitable for mugs and heavily curved items?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It works well on gently curved and coated surfaces; heavily contoured items may need specialized 3D wrap techniques.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DUDUSUB","offers":[{"title":"Default Title","offer_id":55250881544529,"sku":"B0G2S9KFNX","price":29.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/dudusub-front-packaging.jpg?v=1791640629"},{"product_id":"selizo-teflon-heat-press-sheets-15-pack-12-16-in-reusable-ptfe-cover-heat-resistant-to-600-f","title":"selizo Teflon Heat Press Sheets 15-Pack 12×16 in — Reusable PTFE Cover, Heat-Resistant to 316 °C","description":"\u003cp\u003e\u003cstrong\u003eSelizo's 15-pack Teflon sheets are reusable 12\" x 16\" heat-resistant protectors made from glass-fibre PTFE that shield garments, vinyl, mugs and work surfaces during heat-pressing, sublimation and baking.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you press HTV with a Cricut or apply sublimation to tumblers, a dependable cover sheet prevents scorching, adhesive transfer and sticky residues. These brown PTFE sheets measure 12\" x 16\", tolerate temperatures up to 600°F, and are built for repeated use and easy cleaning so hobbyists and small-batch makers can keep working without interruption.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sheet protect my heat-pressed designs?\u003c\/h3\u003e\n\u003cp\u003eThe PTFE-coated glass-fibre surface creates a nonstick barrier between the heat source and your project. It prevents direct contact that can melt adhesive, leave shine marks or transfer residual inks. Using a cover sheet maintains even heat distribution so transfers finish cleanly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNonstick PTFE surface avoids adhesive bleed and residue\u003c\/li\u003e\n  \u003cli\u003eGlass-fibre backing resists tearing under pressure\u003c\/li\u003e\n  \u003cli\u003eHeat distribution reduces hotspots that can scorch fabric\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I reuse these sheets and how do I clean them?\u003c\/h3\u003e\n\u003cp\u003eYes — the durable glass-fibre with PTFE coating is engineered for many cycles, making each sheet a long-term tool for craft work. Cleaning is straightforward: wipe gently with a damp cloth after it cools. For sticky spots, let the sheet cool fully and then remove residues without abrasives to preserve the nonstick layer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRe-usable for hundreds of presses when cared for properly\u003c\/li\u003e\n  \u003cli\u003eWipe with a damp towel; avoid scraping or harsh chemicals\u003c\/li\u003e\n  \u003cli\u003eWorks on both sides, extending usable life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat projects and machines is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe 12\" x 16\" size fits many common heat presses and provides enough coverage for household irons and smaller platen presses. It's suitable for HTV vinyl, sublimation transfers on flat items, and even light baking or roasting tasks where a nonstick heat barrier is useful. You can also trim the sheet to suit smaller projects or irregular shapes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for Cricut HTV applications and small heat presses\u003c\/li\u003e\n  \u003cli\u003eUse for sublimation on mugs, tumblers, and flat blanks\u003c\/li\u003e\n  \u003cli\u003eCut-to-fit for custom sizing or specialty craft work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this safe at high temperatures and for food-contact tasks?\u003c\/h3\u003e\n\u003cp\u003eThe PTFE-coated glass-fibre construction withstands temperatures up to 600°F, making it appropriate for typical pressing and sublimation temperatures. While the sheet is nonstick and water-resistant, follow food-safety best practices: keep sheets clean, designate separate ones for food use if needed, and avoid ingestible contact with surface residues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-resistant up to 600°F for common pressing needs\u003c\/li\u003e\n  \u003cli\u003eWaterproof surface simplifies cleanup after craft or kitchen use\u003c\/li\u003e\n  \u003cli\u003eRecommend separate sheets if switching between craft adhesives and food preparation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Makers and small-business creators who regularly use HTV, sublimation, or tabletop heat tools will appreciate the reliability and economy of a 15-pack. It’s also a useful tool for home bakers and kitchens that want a reusable nonstick barrier for light baking tasks. If you need a flexible, cut-to-size protector that can handle high heat and repeated use, this Selizo set delivers a practical, long-lasting solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many times can I reuse each Selizo teflon sheet?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: With gentle cleaning and no scraping, each sheet can be reused hundreds of times.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the sheet fit my Cricut heat press?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 12\" x 16\" size fits most small heat presses and can be trimmed to fit smaller platens.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"selizo","offers":[{"title":"Default Title","offer_id":55251425689937,"sku":"B08HRR2TK1","price":29.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/selizo-front-packaging-15-pack.jpg?v=1791643644"},{"product_id":"henwasai-12x15-inch-silicone-heat-press-mat-0-3-thick-high-temp-sublimation-pad-trim-to-size","title":"HENWASAI 12x15 Inch Silicone Heat Press Mat — 0.3\" Thick High-Temp Sublimation Pad, Trim-to-Size","description":"\u003cstrong\u003eHENWASAI's 12 x 15 inch silicone heat press mat is a 0.3-inch-thick, high-temperature sublimation pad built to even out heat, protect garments, and improve transfer consistency.\u003c\/strong\u003e\n\n\u003cp\u003eThis premium silicone pad fits most platen heat presses and is engineered for dye-sublimation, iron-on transfers, and other heat-applied decoration. With a heat resistance up to 572°F (300°C), a non-porous surface that resists ink and adhesive buildup, and a thickness optimised for thermal conduction and insulation, this mat is a durable replacement or backup for your workshop. It can be trimmed to size for custom platens and works with automatic, manual, and semi-automatic machines.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this mat make transfers more consistent?\u003c\/h3\u003e\n\u003cp\u003eThe dense silicone construction spreads heat evenly across the press plate, reducing hot and cool spots that cause uneven colour or partial transfers. Its 0.3-inch thickness balances heat conduction and insulation so pressure and temperature results remain stable run after run.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUniform heat distribution minimizes colour banding and patchy areas\u003c\/li\u003e\n  \u003cli\u003e0.3\" (7.6 mm ±0.2 mm) thickness for predictable thermal performance\u003c\/li\u003e\n  \u003cli\u003eCompatible with temperatures up to 572°F (300°C) for most transfer processes\u003c\/li\u003e\n  \u003cli\u003eWorks with automatic, manual, and semi-automatic heat presses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I cut or size this pad for different platens?\u003c\/h3\u003e\n\u003cp\u003eYes — the mat is easily trimmed to match smaller or irregular platens without fraying or delamination. Cut with a sharp blade or utility knife on a stable surface and keep the trimmed edges clean for continued performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12 x 15 inches stock size but fully customisable by trimming\u003c\/li\u003e\n  \u003cli\u003eNon-porous silicone edges remain stable after cutting\u003c\/li\u003e\n  \u003cli\u003eSuitable for t-shirts, bags, mouse pads, and other flat substrates\u003c\/li\u003e\n  \u003cli\u003eIdeal for hybrid workflows using multiple platen sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I care for the silicone mat to extend its life?\u003c\/h3\u003e\n\u003cp\u003eThe non-porous silicone surface resists staining and adhesive accumulation, so routine wipe-downs keep it performing. Avoid sharp objects and store flat or rolled loosely to prevent permanent bends.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWipe with a damp cloth or mild detergent to remove ink or residue\u003c\/li\u003e\n  \u003cli\u003eAvoid petroleum solvents and sharp implements that can cut the surface\u003c\/li\u003e\n  \u003cli\u003eStore flat or gently rolled to preserve thickness and shape\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist deformation and prolonged high-heat exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat projects is this pad best suited for?\u003c\/h3\u003e\n\u003cp\u003eThe HENWASAI mat excels with dye-sublimation and heat transfer vinyl, and it provides a stable base for apparel, promotional items, and craft goods. Its dimensions and durability make it a versatile workshop staple.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT-shirt and garment transfers for hobbyists and small shops\u003c\/li\u003e\n  \u003cli\u003eSublimation on hard or soft substrates like mouse pads and plaques\u003c\/li\u003e\n  \u003cli\u003eProtective cushioning for delicate prints during pressing\u003c\/li\u003e\n  \u003cli\u003eReplacement pad for worn or damaged press platens\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWho is this for?\u003c\/strong\u003e This silicone heat press mat is made for crafters, print shop owners, and makers who need an affordable, durable replacement pad that improves transfer quality. It’s particularly useful for anyone who runs multiple small-to-medium press jobs, trims mats to custom platens, or wants a low-maintenance surface that resists ink and adhesive buildup. If you operate automatic, manual, or semi-automatic presses and want consistent, repeatable results, this 12 x 15 inch, 0.3\" thick HENWASAI pad is a practical addition to your workspace.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What maximum temperature can this silicone mat withstand?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The HENWASAI mat tolerates temperatures up to 572°F (300°C), suitable for most sublimation and heat-transfer processes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will cutting the pad affect performance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — you can trim it to fit platens; the silicone maintains stability and performance after clean cuts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HENWASAI","offers":[{"title":"Default Title","offer_id":55252962541905,"sku":"B0C539TTVF","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/henwasai-front-view-12x15-mat.jpg?v=1791654682"},{"product_id":"hotop-2-inch-sublimation-badge-reel-blanks-30-white-coated-aluminum-discs-heat-press-durable","title":"Hotop 2-inch Sublimation Badge Reel Blanks — 30 White Coated Aluminium Discs, Heat-Press Durable","description":"\u003cp\u003e\u003cstrong\u003eHotop 30-piece 2-inch sublimation aluminium badge blanks are round, coated discs made for heat-transfer printing to create personalised badge reels, phone holders, keychains and more.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese white-coated aluminium discs deliver crisp colours and resist warping during heat-press sublimation, giving makers a reliable base for custom artwork, photos, logos and collage designs. Sold as a bulk set of thirty 50.8 mm blanks, they suit hobby crafters, small businesses and craft-night projects that need consistent, heat-stable surfaces for vivid results.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these blanks perform during sublimation?\u003c\/h3\u003e\n\n\u003cp\u003eThe aluminium blanks have a smooth, pre-coated surface engineered to accept dye-sublimation inks cleanly, producing sharp, saturated images when pressed at the proper temperature. Because aluminium conducts heat well and holds its shape, you’ll get predictable transfers with minimal bubbling or distortion.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCoated white surface designed for sublimation dye transfer\u003c\/li\u003e\n  \u003cli\u003eRecommended press range: about 170–190°C (338–374°F) for 35–45 seconds\u003c\/li\u003e\n  \u003cli\u003eAluminium core resists warping at high temperatures\u003c\/li\u003e\n  \u003cli\u003eProduces vivid, high-contrast prints compared with some plastics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat projects can I make with these 2-inch discs?\u003c\/h3\u003e\n\n\u003cp\u003eThese 2-inch discs are sized to fit retractable badge reels, collapsible phone grips, small keychain frames and a variety of craft mounts. They’re ideal for making personalised gifts, event giveaways, staff IDs, and small merchandise items with full-colour photos or artwork.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCustom badge reels and retractable ID holders\u003c\/li\u003e\n  \u003cli\u003ePop sockets or collapsible phone grips (adhesive required)\u003c\/li\u003e\n  \u003cli\u003eMini keychains, magnets, and small signage\u003c\/li\u003e\n  \u003cli\u003eEvent swag, team badges, and craft-fair inventory\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the material and size details I should know?\u003c\/h3\u003e\n\n\u003cp\u003eEach blank is a 50.8 mm (2.0 inch) round aluminium plate with a white sublimation coating. The metal is corrosion-resistant and has a polished feel, offering a professional tactile finish once printed and assembled into accessories.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterial: aluminium with sublimation coating\u003c\/li\u003e\n  \u003cli\u003eColour: white coated surface for optimal ink visibility\u003c\/li\u003e\n  \u003cli\u003eDiameter: 50.8 mm \/ 2 inches per disc\u003c\/li\u003e\n  \u003cli\u003ePack: 30 blanks per set for batch production or sharing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare and handle the blanks for best results?\u003c\/h3\u003e\n\n\u003cp\u003eClean the surface of dust or oils before printing, align your transfer carefully, and use protective tape when heat-pressing to prevent shifting. After pressing, allow blanks to cool fully before peeling transfer paper and handling to avoid smudging or thermal shock.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWipe with lint-free cloth before applying transfers\u003c\/li\u003e\n  \u003cli\u003eUse heat-resistant tape to secure transfer paper\u003c\/li\u003e\n  \u003cli\u003eFollow recommended time and temperature settings for clarity\u003c\/li\u003e\n  \u003cli\u003eLet pieces cool completely before final assembly onto hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Makers, craft-business owners and DIY gift givers who need a dependable, small-format blank for full-colour sublimation will find this Hotop pack useful. The set size supports small production runs, workshops or shared crafting sessions and is well suited to those seeking metal-based blanks that maintain shape and colour fidelity under heat-press conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these blanks safe for standard heat presses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The aluminium blanks tolerate typical sublimation press temperatures (around 170–190°C) and resist warping when used as directed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these for phone grips and keychains?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Absolutely. These 2\" discs fit collapsible phone holders, keychains and badge reels once you adhere appropriate hardware.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hotop","offers":[{"title":"Default Title","offer_id":55252963819857,"sku":"B0FNMHZKD8","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/hotop-front-packaging-badge-blanks.jpg?v=1791654704"},{"product_id":"kvcsyaw-aluminum-sublimation-blanks-6-x-8-in-pack-of-10-pre-treated-photo-quality-panels","title":"KVCSYAW Aluminium Sublimation Blanks 6 x 8 in Pack of 10 — Pre-treated Photo-Quality Panels","description":"\u003cb\u003ePremium 6 x 8-inch aluminium sublimation blanks in a pack of 10 designed for vibrant, durable photo-quality transfers.\u003c\/b\u003e\n\nThese 6 x 8-inch aluminium blanks from KVCSYAW are ready-to-print panels built for heat-transfer sublimation, offering a smooth, receptive surface that produces sharp, long-lasting colour. Sold in a set of ten, each piece gives crafters, small businesses, and hobbyists the quantity and consistency needed for product runs, event signage, or personalised gifts. The lightweight yet stable aluminium core resists warping and performs reliably under standard heat and pressure conditions used in direct-to-substrate sublimation workflows.\n\n\u003ch3\u003eHow do these blanks deliver vivid sublimation prints?\u003c\/h3\u003e\n\u003cp\u003eKVCSYAW aluminium blanks are coated and finished to accept dye-sublimation inks evenly, resulting in crisp edges and saturated hues. The surface promotes excellent ink diffusion so gradients and photo details reproduce well.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-treated surface formulated for dye-sublimation transfers\u003c\/li\u003e\n  \u003cli\u003eSmooth finish reduces banding and streaking during heat pressing\u003c\/li\u003e\n  \u003cli\u003eConsistent colour response across the set for batch projects\u003c\/li\u003e\n  \u003cli\u003eScratch- and fade-resistant final prints when processed correctly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat equipment and steps are recommended for best results?\u003c\/h3\u003e\n\u003cp\u003eUse a heat press set to your sublimation paper and ink guidelines, with firm, even pressure for a few minutes. Preheat, position your printed transfer, and apply consistent heat; let the panel cool before peeling to protect the image and coating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended: commercial or hobby heat press that fits 6 x 8 in panels\u003c\/li\u003e\n  \u003cli\u003eUse high-quality sublimation paper and inks for accurate colours\u003c\/li\u003e\n  \u003cli\u003eApply even heat and pressure; follow time\/temperature from your transfer materials\u003c\/li\u003e\n  \u003cli\u003eAllow cooling to prevent image smudging and ensure adhesion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere can finished aluminium signs be used?\u003c\/h3\u003e\n\u003cp\u003eCompleted pieces work well as indoor décor, desktop signage, commemorative plaques, or promotional displays. Their lightweight aluminium construction makes them simple to hang, prop, or mount, and they tolerate common indoor and sheltered outdoor environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHome wall art, photo gifts, or gallery-style displays\u003c\/li\u003e\n  \u003cli\u003ePoint-of-sale signs, vendor booth displays, and event badges\u003c\/li\u003e\n  \u003cli\u003eDesk nameplates, directional signage, and custom labels\u003c\/li\u003e\n  \u003cli\u003eSuitable for indoor and covered outdoor use when installed properly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow many panels are included and what are their dimensions?\u003c\/h3\u003e\n\u003cp\u003eThis pack contains ten identical aluminium photo sign blanks, each measuring roughly 6 x 8 inches. The quantity supports multiple prototypes, small production runs, or repeat custom orders without reordering mid-project.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: 10 aluminium blanks per package\u003c\/li\u003e\n  \u003cli\u003eIndividual size: approximately 6 x 8 inches (portrait or landscape use)\u003c\/li\u003e\n  \u003cli\u003eUniform thickness suitable for heat pressing and mounting hardware\u003c\/li\u003e\n  \u003cli\u003eEasy to trim, edge-finish, or attach hanging hardware as needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for\n\nCrafters, small business owners, print shops, and makers who need consistent, ready-to-transfer aluminium panels will find this KVCSYAW 10-pack practical and economical. It’s ideal for anyone producing personalised gifts, custom signage, event merchandise, or sample pieces who requires a reliable substrate that produces bright, durable sublimation results without specialty handling. If you plan to run multiple prints, test different transfer techniques, or scale up small orders, these blanks provide a consistent foundation to showcase photographs, logos, or full-colour artwork.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these aluminium blanks ready for dye-sublimation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the KVCSYAW blanks are pre-treated for dye-sublimation and accept standard sublimation inks and paper.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these outdoors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They suit indoor use and sheltered outdoor displays; prolonged exposure to weather may affect longevity.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KVCSYAW","offers":[{"title":"Default Title","offer_id":55253016576337,"sku":"B0C1Y4XJRF","price":31.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/kvscyaw-front-packaging-6x8-aluminum.jpg?v=1791655350"},{"product_id":"eeekit-heat-press-cover-for-htvront-auto-heat-press-machine-2-silver-420d-oxford-water-resistant-dust-protector","title":"EEEKit Heat Press Cover for HTVRONT Auto Heat Press Machine 2 — Silver 420D Oxford, Water-Resistant Dust Protector","description":"\u003cp\u003e\u003cstrong\u003eThe EEEKit Heat Press Cover is a custom-fit, silver-coated 420D Oxford dust cover designed to protect the HTVRONT Auto Heat Press Machine 2 from dust, moisture, UV exposure and wear.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your HTVRONT Auto Heat Press Machine 2 clean and working longer with a cover that matches its contours. This EEEKit cover measures 19.7\" L x 15.8\" W x 12.2\" H to fit the HTVRONT Auto Heat Press Machine 2 precisely, and combines tear-resistant fabric, water resistance, and a reflective coating to reduce heat buildup and lighten UV exposure while stored or idle.\u003c\/p\u003e\n\n\u003ch3\u003eWill this cover fit my HTVRONT Auto Heat Press Machine 2?\u003c\/h3\u003e\n\u003cp\u003eYes — the EEEKit cover is sized specifically for the HTVRONT Auto Heat Press Machine 2. Before buying, compare your machine to the cover dimensions to ensure the best fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCustom fit dimensions: 19.7\" L x 15.8\" W x 12.2\" H.\u003c\/li\u003e\n  \u003cli\u003eDesigned to follow the machine’s shape for full protection.\u003c\/li\u003e\n  \u003cli\u003eAdjustable drawstring hem for a snug, secure fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the material protect my heat press?\u003c\/h3\u003e\n\u003cp\u003eThe cover uses silver-coated 420D Oxford fabric that stands up to daily use. It resists tearing and abrasion while offering water resistance and a reflective layer to reduce heat and UV exposure to the machine’s exterior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e420D Oxford fabric for durability and puncture resistance.\u003c\/li\u003e\n  \u003cli\u003eSilver coating blocks UV rays and helps prevent heat buildup.\u003c\/li\u003e\n  \u003cli\u003eWater-resistant surface helps keep out spills, stains, and moisture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical features make it easy to use every day?\u003c\/h3\u003e\n\u003cp\u003eEEEKit added small but helpful details that improve daily handling and storage. A reinforced handle lets you put the cover on and take it off without tugging fabric over sensitive parts, and an adjustable drawstring hem locks the cover in place during storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced top handle for simple removal and placement.\u003c\/li\u003e\n  \u003cli\u003eAdjustable drawstring hem to prevent slipping and dust ingress.\u003c\/li\u003e\n  \u003cli\u003eIncludes a compact storage bag and wipes-clean exterior for easy maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I care for and store the cover when not in use?\u003c\/h3\u003e\n\u003cp\u003eMaintenance is straightforward — the surface wipes clean with a damp cloth and the cover packs down into the supplied storage bag when you don’t need it. That makes it convenient for workshops with limited space or for transport between workstations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWipe-clean fabric; no special detergents required.\u003c\/li\u003e\n  \u003cli\u003eLightweight and foldable into the included storage bag.\u003c\/li\u003e\n  \u003cli\u003eDurable construction for long-term, repeated use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The EEEKit Heat Press Cover is made for crafters, small business owners, screen printers, and hobbyists who own an HTVRONT Auto Heat Press Machine 2 and want a tailored, durable protective solution. If you need a cover that resists moisture, reduces dust and UV exposure, and stays secure during storage, this cover offers a practical mix of protective fabric and everyday convenience without adding bulk.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the EEEKit cover waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The cover is water-resistant, repelling light moisture and spills but not fully waterproof for submersion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the cover fit other heat press models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s sized for the HTVRONT Auto Heat Press Machine 2; measure your machine against 19.7\" x 15.8\" x 12.2\" to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EEEKit","offers":[{"title":"Default Title","offer_id":55253017755985,"sku":"B0GGHWQ2W7","price":31.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/eeekit-cover-front-view.jpg?v=1791655374"},{"product_id":"kazheon-heat-press-platen-wrap-covers-15-x-15-in-2-pack-teflon-coated-stretch-backed","title":"Kazheon Heat Press Platen Wrap Covers 15 x 15 in (2-Pack) Teflon-Coated, Stretch-Backed","description":"\u003cstrong\u003eKazheon’s 2-piece 15 x 15 inch heat press platen wrap kit protects upper and lower press plates from adhesive residue, scratches, and ink transfer during sublimation and heat transfer work.\u003c\/strong\u003e\n\n\u003cp\u003eThis set contains two reusable platen wrap covers sized approximately 15 x 15 inches plus a 9 x 9 inch cleaning towel to help keep your heat press clean and performing reliably. Made from Teflon-coated fibreglass with a stretch-backed fabric, the covers slip on and off easily and resist sticking, making them a practical accessory for hobbyists and small shops that want to reduce cleanup and prolong platen life.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Kazheon wrap shield my heat press from residue and damage?\u003c\/h3\u003e\n\u003cp\u003eThe Teflon-coated surface creates a non-stick barrier between your transfer materials and the heated platen, catching overflow adhesive, ink, and melted materials before they contact the metal plate or silicone pad. This cuts down on time spent scraping and prevents abrasive cleaning that can wear parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-stick Teflon coating stops adhesives and inks from bonding to the platen.\u003c\/li\u003e\n  \u003cli\u003eFibreglass core tolerates repeated high-heat cycles without degrading.\u003c\/li\u003e\n  \u003cli\u003eProtects silicone lower pads from cuts, abrasions, and premature wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these covers fit my machine and stay flat during pressing?\u003c\/h3\u003e\n\u003cp\u003eEach cover measures roughly 15 x 15 inches and the stretchy polyester backing helps conform to slightly uneven surfaces; however they are not recommended for bottom platens with front-mounted handles. For best results ensure your platen height is within ±0.5 cm of a standard flat plate and that the surface is as level as possible.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApproximate size: 15 x 15 inches per cover; verify before buying.\u003c\/li\u003e\n  \u003cli\u003eStretch-backed design improves fit on most flat top platens.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for bottom pressure plates with front handles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I care for the platen wrap to remove shipping creases and residue?\u003c\/h3\u003e\n\u003cp\u003eThe wraps ship folded, so light creasing may appear on arrival; these relax with heat and regular use. For quick spot cleaning, dampen the included towel, wring it out, and wipe the Teflon surface—its non-stick finish simplifies removing leftover ink or adhesive.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShipping folds may be smoothed out after a few heat cycles or with gentle wiping.\u003c\/li\u003e\n  \u003cli\u003eIncluded 9 x 9 inch towel helps remove residue without damaging the coating.\u003c\/li\u003e\n  \u003cli\u003eWipe with a damp cloth; no harsh solvents required for normal clean-up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reusable are these platen covers for everyday shop use?\u003c\/h3\u003e\n\u003cp\u003eConstructed from fibreglass with a Teflon finish and an elastic fabric backing, these covers are built for repeated use under high temperatures. They resist sticking and abrasion, offering a cost-effective way to extend the life of your platens and silicone pads when used and maintained correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReusable for many heat cycles when cleaned and handled properly.\u003c\/li\u003e\n  \u003cli\u003eFibreglass core retains integrity under heat without fraying.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce abrasive cleaning that shortens platen and pad lifespan.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Kazheon 2Pcs 15 x 15 inch platen wrap kit is ideal for crafters, small print shops, and hobbyists using 15-inch flat heat press platens who want quick cleanup, fewer platen maintenance tasks, and better protection for silicone lower pads. Confirm your platen dimensions and handle placement before purchasing to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these covers heat resistant and reusable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The fibreglass core with Teflon coating tolerates repeated heat cycles and can be reused when cleaned and handled properly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the 15 x 15 inch cover fit any heat press?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits most flat 15 x 15 inch platens but is not recommended for bottom plates with front handles; confirm platen dimensions before buying.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Kazheon","offers":[{"title":"Default Title","offer_id":55253052948817,"sku":"B0FMK4D2TD","price":32.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/kazheon-front-cover.jpg?v=1791655739"},{"product_id":"gekixutp-metal-sublimation-ornament-blanks-20-pack-3-9-2-8-double-sided-aluminum-1mm-lightweight-rust-resistant","title":"GEKIXUTP Metal Sublimation Ornament Blanks 20-Pack 3.9\"×2.8\" Double-Sided Aluminium, 1mm Lightweight Rust-Resistant","description":"\u003cp\u003e\u003cstrong\u003eThese are 20 double-sided, 3.9\" × 2.8\" aluminium ornament blanks designed for heat-transfer sublimation and ready for custom printing and hanging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eGEKIXUTP metal sublimation ornaments give crafters a lightweight, rust-resistant base to transfer photos, text, or artwork onto both faces of each piece. Each ornament arrives with protective film, pre-drilled hole and hanging string so you can personalize tree decorations, gifts, or small keepsakes quickly using a heat press or convection oven. The thin 1mm aluminium accepts dye-sublimation coating for vibrant, scratch-resistant colour when processed correctly.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I prepare and sublimate these aluminium ornament blanks?\u003c\/h3\u003e\n\u003cp\u003eStart by removing the protective film from both sides, clean off fingerprints, and align your printed transfer. Heat-press parameters provided by GEKIXUTP are a guideline—typical transfer time and temperature fall in a narrow range to get consistent colour and adhesion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePeel protective film before printing and pressing.\u003c\/li\u003e\n  \u003cli\u003eRecommended transfer: 50–60 seconds at about 190–200°C (374–392°F).\u003c\/li\u003e\n  \u003cli\u003eUse heat-resistant tape and a flat press for even pressure.\u003c\/li\u003e\n  \u003cli\u003eAllow pieces to cool before removing transfer paper to avoid smudging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes these blanks suitable for holiday decorations and gifts?\u003c\/h3\u003e\n\u003cp\u003eThe double-sided aluminium construction is lightweight yet durable, making ornaments easy to hang on trees, in cars, or from windows. The finished sublimation surface resists fading and scratching, delivering a polished look for personalised presents, seasonal décor, or keepsakes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble-sided printing lets you put photos or messages on both faces.\u003c\/li\u003e\n  \u003cli\u003eIncludes 20 hanging strings so items are ready to display.\u003c\/li\u003e\n  \u003cli\u003eThin 1mm aluminium keeps weight low for delicate branches or small hooks.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant material suitable for long-term use indoors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and supplies work best with these ornament blanks?\u003c\/h3\u003e\n\u003cp\u003eThese blanks are engineered for dye-sublimation systems but work with common craft tools used by hobbyists and small businesses. Use quality sublimation paper, a compatible inkset, and a press that can deliver steady temperature and pressure for uniform results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSublimation printer, heat-resistant tape, and flat heat press recommended.\u003c\/li\u003e\n  \u003cli\u003eHigh-resolution printed transfers for crisp images and text.\u003c\/li\u003e\n  \u003cli\u003eHeat-safe mitts or pillows to protect delicate designs during pressing.\u003c\/li\u003e\n  \u003cli\u003eScissors or a cutting mat for trimming transfer paper to fit shapes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Makers, small-business sellers, and hobby crafters who create customised ornaments, party favours, and promotional items will value the convenience of a 20-piece set. If you run a seasonal craft business, make personalised gifts for friends and family, or are experimenting with dye-sublimation for the first time, these lightweight, pre-drilled metal blanks simplify production while producing attractive, durable results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these ornaments ready to sublimate out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each aluminium blank has a protective film to remove; then they are ready for dye-sublimation with recommended heat settings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperature and time should I use for transfer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use about 190–200°C (374–392°F) for 50–60 seconds as a starting point; adjust for your press and ink as needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GEKIXUTP","offers":[{"title":"Default Title","offer_id":55253062549841,"sku":"B0DCGGMZRZ","price":32.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/gekixutp-front-packaging-metal-ornaments.jpg?v=1791655844"},{"product_id":"aproca-travel-case-for-cricut-easypress-mini-black-red-semi-rigid-eva-shell-organized-interior","title":"Aproca travel case for Cricut EasyPress Mini — Black\/Red semi-rigid EVA shell, organized interior","description":"\u003cp\u003e\u003cstrong\u003eAproca's hard travel case is a custom-fit protective carrier designed to store and transport the Cricut EasyPress Mini and similar mini heat-press machines safely and stylishly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your EasyPress Mini secure whether you're moving between craft rooms, teaching a workshop, or travelling to a fair. This compact case combines a rigid EVA shell with a textured 1680D outer fabric and an organized interior so the press, cords, and small accessories stay protected from bumps, scratches, and light impact. The case is sold empty — any tools or devices pictured are for illustration only.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the case protect my Cricut EasyPress Mini during travel?\u003c\/h3\u003e\n\n\u003cp\u003eThe semi-rigid shell and dense foam interior absorb shocks and resist crushing, keeping the heat press from getting dented or scratched. A smooth double zipper closes securely so the unit stays inside, and the structured exterior resists light impacts better than a soft bag.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-density EVA inner shell cushions the device\u003c\/li\u003e\n  \u003cli\u003e1680D outer fabric provides abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eDouble zipper reduces accidental openings\u003c\/li\u003e\n  \u003cli\u003eSnug internal dimensions limit movement inside the case\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat storage and organization features are included?\u003c\/h3\u003e\n\n\u003cp\u003eInside you’ll find a mesh pocket and elastic straps to keep cords, smaller pressing pads, and transfer materials tidy and accessible. The pocket prevents loose items from rattling around and potentially scratching the press surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSized mesh pocket for cords, pads, or templates\u003c\/li\u003e\n  \u003cli\u003eCompression space holds the press snugly in place\u003c\/li\u003e\n  \u003cli\u003eFlat interior keeps accessories organized and visible\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this case easy to carry and use day to day?\u003c\/h3\u003e\n\n\u003cp\u003eYes — a comfortable top handle and a balanced, compact footprint make the case convenient to grab and go. The double zipper glides smoothly for fast access, and the lightweight construction keeps the overall weight low while still offering strong protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePadded carrying handle for comfortable transport\u003c\/li\u003e\n  \u003cli\u003eLightweight yet durable materials for portability\u003c\/li\u003e\n  \u003cli\u003eQuick-open zipper for fast access during projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this case fit my specific model and what should I expect on compatibility?\u003c\/h3\u003e\n\n\u003cp\u003eThis model is designed for the Cricut EasyPress Mini and compatible mini heat-press machines such as the DODODUM EasyPress Mini. Because it’s a purpose-built, form-fitting case, confirm dimensions before purchase if you own a non-standard or aftermarket press.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to match EasyPress Mini dimensions and shape\u003c\/li\u003e\n  \u003cli\u003eCompatible with similarly sized mini heat presses\u003c\/li\u003e\n  \u003cli\u003eEmpty case only — device and accessories not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Crafters, makers, teachers, and mobile vendors who use a Cricut EasyPress Mini or equivalent and need dependable, portable protection. Choose this case if you want a neat, professional way to transport your mini heat press and accessories without adding bulk, and prefer a durable exterior that stands up to frequent travel and repeated handling.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this Aproca case include the Cricut EasyPress Mini?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This listing is for the empty Aproca travel case only; the heat press and accessories shown are not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the case withstand being dropped or bumped?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The high-density EVA shell and 1680D exterior provide strong protection against bumps and light drops, reducing damage risk.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Aproca","offers":[{"title":"Default Title","offer_id":55253124841809,"sku":"B08GLDHQVD","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/aproca-front-packaging-case-black-red.jpg?v=1791656120"},{"product_id":"rainflow-heat-press-pillow-mat-3-pack-teflon-ptfe-fire-resistant-foam-15-15-27-27-28-36-cm-for-even-heat-no-stick-transfe","title":"RAINFLOW Heat Press Pillow Mat 3-Pack — Teflon PTFE, Fire-Resistant Foam (15×15, 27×27, 28×36 cm) for Even Heat \u0026 No-Stick Transfe","description":"\u003cstrong\u003eRAINFLOW 3 Pack Heat Press Pillow Mats are a set of three Teflon-covered, fire-resistant pressing pillows designed to lift fabric for even heat and pressure during heat-transfer projects.\u003c\/strong\u003e\n\n\u003cp\u003eThis three-piece kit includes conveniently sized pressing pillows — 15×15 cm, 27×27 cm, and 28×36 cm — crafted with PTFE Teflon surfaces and fire-resistant foam cores. The non-stick, waterproof outer layer wipes clean, while the cushioned interior evens out pressure and helps prevent scorching or imprints when applying HTV, sublimation, and other transfers. Lightweight and reusable, these mats are intended to simplify detail work and protect garments and work surfaces from heat and moisture.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these pillows improve transfer quality?\u003c\/h3\u003e\n\u003cp\u003eBy lifting the fabric away from the hard platen, the pillow creates a smooth, cushioned platform that evens out pressure and heat across the transfer area. This reduces hotspots and surface irregularities, producing cleaner, more consistent results on delicate or structured garments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides a stable, contoured surface under zippers, seams, or thick seams\u003c\/li\u003e\n  \u003cli\u003eHelps distribute pressure evenly for crisp, uniform adhesion\u003c\/li\u003e\n  \u003cli\u003eReduces the risk of scorching or imprinting from hard press platens\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials are these pressing pillows made from and why it matters?\u003c\/h3\u003e\n\u003cp\u003eThe outer layer is PTFE (Teflon) which is heat-resistant, non-stick, and waterproof, while the interior uses fire-resistant foam for insulation and support. This combination keeps transfers clean, prevents sticking, and protects both fabric and work surfaces from excessive heat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTeflon surface resists adhesive and ink buildup for easy cleaning\u003c\/li\u003e\n  \u003cli\u003eFire-resistant foam provides thermal insulation and cushioning\u003c\/li\u003e\n  \u003cli\u003eDurable construction supports repeated use in hobby and professional environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich projects and fabrics work best with this 3-pack?\u003c\/h3\u003e\n\u003cp\u003eThe set covers a wide range of applications, from small patches and sleeves to full-shirt areas, so it’s useful for hobbyists and small businesses alike. These pillows are compatible with HTV, sublimation transfers, vinyl, and many other heat-transfer materials — but always test on scrap fabric when working with specialty textiles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmall sizes ideal for sleeves, collars, and bag panels\u003c\/li\u003e\n  \u003cli\u003eLarger pad fits body areas on T-shirts and hoodies\u003c\/li\u003e\n  \u003cli\u003eGreat for layered or textured fabrics where even pressure is essential\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do you care for and store these heat press pillows?\u003c\/h3\u003e\n\u003cp\u003eMaintenance is straightforward: wipe the Teflon surface with a damp cloth after use to remove residues, and store flat or rolled gently to preserve the foam core. Proper care keeps the non-stick surface effective and extends the lifespan of the pillows.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWipe down with a soft cloth after each press; avoid abrasive cleaners\u003c\/li\u003e\n  \u003cli\u003eKeep away from direct flames and extreme temperatures when stored\u003c\/li\u003e\n  \u003cli\u003eInspect periodically for tears in the Teflon covering and replace if damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The RAINFLOW 3 Pack Heat Press Pillow Mats are aimed at crafters, small custom apparel shops, and hobbyists who need consistent, protected heat-transfer results on a variety of garment shapes and materials. If you work with HTV, sublimation, or vinyl and want an easy-to-clean, reusable accessory to prevent imprints and improve transfer quality, this multi-size, Teflon-coated kit is a practical addition to your heat press accessories.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these pillows safe with high heat presses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The PTFE surface and fire-resistant foam are designed for heat-transfer temperatures typical in HTV and sublimation work, but always follow your press and material guidelines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these under zippers and buttons?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Absolutely. The pillows cushion hard areas like zippers and buttons to prevent imprints and achieve more even pressure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"RAINFLOW","offers":[{"title":"Default Title","offer_id":55253175206225,"sku":"B0DKJ4PZJ1","price":31.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/rainflow-front-view-packaging.jpg?v=1791656656"},{"product_id":"gekixutp-metal-sublimation-keychain-blanks-120pc-oval-double-sided-pre-coated-with-rings-included","title":"GEKIXUTP metal sublimation keychain blanks 120pc Oval — double-sided, pre-coated with rings included","description":"\u003cp\u003e\u003cstrong\u003eGEKIXUTP 120-piece metal sublimation keychain blanks are double-sided, oval aluminium pendants with rings and jump rings included, ready for heat-transfer customization.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese oval keychain blanks give crafters and small-business makers a ready-to-use kit for personalised accessories. The set combines lightweight aluminium blanks with protective film on both sides, plus matching key rings and jump rings, so you can print full-colour designs and assemble finished keychains straight out of the heat press. They’re built for sublimation printing and intended for a variety of DIY and resale uses.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these blanks perform for double-sided sublimation?\u003c\/h3\u003e\n\n\u003cp\u003eThe blanks are pre-coated and protected by films on both faces to preserve the sublimation surface until you’re ready to press. When transferred at recommended temperature and time, the coating accepts dye-sublimation ink and delivers vibrant, lasting colour across both sides.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePre-coated aluminium surfaces designed for dye-sublimation.\u003c\/li\u003e\n  \u003cli\u003eProtective films on both sides removed before printing to keep surfaces pristine.\u003c\/li\u003e\n  \u003cli\u003eRecommended transfer: 190–200°C (374–392°F) for 50–60 seconds as a starting guideline.\u003c\/li\u003e\n  \u003cli\u003eResults: bright colours, clear details, and edge-to-edge coverage on both faces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the 120-piece bulk pack and how does it speed up production?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit includes complete hardware so you can finish keychains immediately after pressing. Batch printing and simple assembly reduce turnaround time, making the pack useful for craft fairs, gift orders, and small retail runs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e40 aluminium oval sublimation blanks ready for printing.\u003c\/li\u003e\n  \u003cli\u003e40 matching key rings for quick attachment.\u003c\/li\u003e\n  \u003cli\u003e40 jump rings for connecting blanks to rings or other findings.\u003c\/li\u003e\n  \u003cli\u003eBulk quantity supports batch production and multiple design variations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these keychains durable and suitable for everyday use?\u003c\/h3\u003e\n\n\u003cp\u003eThe blanks are made from lightweight aluminium with a sublimation-ready coating that resists fading and scratching when properly cured. While aluminium is corrosion-resistant and intended for normal wear, avoid prolonged exposure to harsh chemicals and abrasive surfaces to preserve print longevity.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAluminium construction: light, rust-resistant, and sturdy for regular use.\u003c\/li\u003e\n  \u003cli\u003eAnti-scratch coating helps protect printed graphics when handled carefully.\u003c\/li\u003e\n  \u003cli\u003eNot recommended for heavy abrasive environments or constant water immersion.\u003c\/li\u003e\n  \u003cli\u003eStore in a dry place and remove protective film before pressing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat projects and markets suit these oval sublimation blanks?\u003c\/h3\u003e\n\n\u003cp\u003eThese ovals work well for personalised keepsakes, promotional giveaways, seasonal ornaments, and accessory lines in shops. Their double-sided capability opens up creative options—portrait and message on opposite sides, or two complementary designs—for added retail appeal.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCustom gifts: photos, names, dates for weddings, graduations, and holidays.\u003c\/li\u003e\n  \u003cli\u003eRetail products: add branding, patterns, or collector series to sell online or at markets.\u003c\/li\u003e\n  \u003cli\u003eEvent merchandise: team logos, sponsor promos, and commemorative tokens.\u003c\/li\u003e\n  \u003cli\u003eCrafting: zipper pulls, bag tags, ornaments, and small pendants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The GEKIXUTP 120-piece set is aimed at hobbyists, craft-business owners, print shops, and teachers running group projects—anyone who needs a high-volume, ready-to-press supply of double-sided oval keychain blanks. If you want a complete starter kit that minimizes sourcing hardware and accelerates assembly, this bulk pack provides the components and sublimation-friendly surfaces to make customisable keychains at scale.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to remove any film before sublimation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Peel the protective film off both sides before pressing to expose the sublimation coating.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What heat press settings should I use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Start at 190–200°C (374–392°F) for 50–60 seconds and adjust based on your press and paper results.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GEKIXUTP","offers":[{"title":"Default Title","offer_id":55253197783377,"sku":"B0DB8V3LCL","price":31.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/gekixutp-oval-front-packaging.jpg?v=1791656832"},{"product_id":"treela-12-x-15-inch-heat-press-platen-wrap-covers-2-pack-ptfe-nonstick-heat-resistant-to-500-f","title":"Treela 12 x 15 Inch Heat Press Platen Wrap Covers — 2-Pack PTFE Nonstick, Heat-Resistant to 260 °C","description":"\u003cstrong\u003eTreela heat press platen wrap covers are reusable PTFE-coated protector sheets that fit 12 x 15 inch platens and shield both upper and lower press plates from residue, scratches, and heat.\u003c\/strong\u003e\n\nMade for hobbyists and small-business decorators, these two wrap covers slip over your heat press platens to create a nonstick, easy-clean barrier between transfers and the machine. Constructed with a PTFE (Teflon-style) coating bonded to polyester fabric, each cover resists temperatures up to 500°F (260°C) and wipes clean of inks, adhesives, and transfer residue. The elastic-backed design stretches over most flat platens to protect silicone lower pads and metal upper plates, prolonging equipment life and simplifying cleanup.\n\n\u003ch3\u003eHow do these platen wraps prevent transfer problems and sticky residue?\u003c\/h3\u003e\n\u003cp\u003eThe PTFE-coated surface provides a nonstick layer so inks, sublimation dyes, and adhesives are less likely to adhere to your press. That means fewer ghost marks, less buildup on the platens, and faster turnaround between jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNonstick PTFE surface repels ink and adhesive residue.\u003c\/li\u003e\n  \u003cli\u003eWipes clean with a damp cloth — no solvents required.\u003c\/li\u003e\n  \u003cli\u003eReduces need for frequent platen scrubbing or pad replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these covers endure high temperatures and repeated use?\u003c\/h3\u003e\n\u003cp\u003eYes — the combination of PTFE coating and woven polyester backing is engineered for repeated heat-transfer cycles. Rated to about 500°F (260°C), the covers tolerate typical sublimation and heat-press settings without degrading, provided you follow temperature guidelines for your materials.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat resistant up to 500°F (260°C) for common transfers.\u003c\/li\u003e\n  \u003cli\u003eDurable coating resists cracking or flaking under normal use.\u003c\/li\u003e\n  \u003cli\u003eMachine- or hand-cleanable for long-term reuse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to fit and remove the wrap covers on my press?\u003c\/h3\u003e\n\u003cp\u003eThe back of each cover features elastic polyester that stretches over the platen edges for a snug fit, making installation quick and secure. Removal is equally straightforward — the flexible fabric peels off for cleaning or replacement without tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eElastic polyester backing for a snug, tool-free fit.\u003c\/li\u003e\n  \u003cli\u003eSimple on\/off design speeds changeovers between jobs.\u003c\/li\u003e\n  \u003cli\u003eTwo-piece set fits both upper and lower flat platens (confirm size before buying).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size and compatibility should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eEach cover measures about 15 x 12 x 1.38 inches (38.1 x 30.5 x 3.5 cm), sized for standard 12 x 15 inch platens. They are intended for flat upper and lower platens; note they may not suit presses with a front handle on the bottom platen.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDimensions: ~15 x 12 x 1.38 in (38.1 x 30.5 x 3.5 cm).\u003c\/li\u003e\n  \u003cli\u003eConfirm platen shape and presence of front handles before ordering.\u003c\/li\u003e\n  \u003cli\u003eSet includes two covers to protect both platens simultaneously.\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for\n\nThese Treela platen wrap covers are designed for crafters, print shops, and small business owners who run sublimation, heat-transfer vinyl, or other heat-press processes regularly. If you want to cut cleanup time, protect silicone lower pads and metal platens from abrasion, and reduce transfer ghosting without replacing pads frequently, this reusable two-piece set is a practical, budget-friendly upgrade. Verify platen size and handle placement before purchase to ensure proper fit and optimal protection.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these covers fit a 12x15 inch heat press?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each cover is about 15 x 12 inches and designed for standard 12x15 inch platens; confirm platen shape before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I clean inks off the Treela PTFE covers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The PTFE surface is nonstick and wipes clean with a damp cloth; no harsh solvents needed for routine residue removal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Treela","offers":[{"title":"Default Title","offer_id":55253257978193,"sku":"B0BW9973YX","price":31.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/treela-front-packaging-view.jpg?v=1791657256"},{"product_id":"bstsll-heat-press-platen-covers-15-x-15-inch-teflon-coated-reusable-top-bottom-wraps","title":"BSTSLL Heat Press Platen Covers 15 x 15 Inch — Teflon-Coated Reusable Top \u0026 Bottom Wraps","description":"\u003cstrong\u003eBSTSLL 15 x 15 Inch Heat Press Covers are a pair of teflon-coated, reusable platen wraps that protect both top and bottom press plates during heat transfers.\u003c\/strong\u003e\n\n\u003cp\u003eIf you do heat transfers, sublimation, vinyl pressing, or custom apparel work, keeping your press platens clean and undamaged is essential. These BSTSLL platen wrap covers (two 15 x 15\" pieces plus a towel) slip over the top and lower pressure plates to prevent adhesive buildup, scratches, and scorching while providing a non-stick surface that withstands high temperatures.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these covers protect my heat press during transfers?\u003c\/h3\u003e\n\u003cp\u003eThe teflon-coated surface acts as a barrier between your transfer media and the metal platen so adhesives, inks, and scorch marks stay off the plate. The stretchy polyester backing helps the cover cling securely to rounded or flat platens for consistent pressure and even heat distribution.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-stick Teflon coating prevents glue and ink adhesion\u003c\/li\u003e\n  \u003cli\u003eStretchy polyester backing ensures snug fit and consistent pressure\u003c\/li\u003e\n  \u003cli\u003eReusable design reduces need for frequent platen cleaning\u003c\/li\u003e\n  \u003cli\u003eIncludes towel to wipe away surface residue between jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these covers handle the temperatures used in heat pressing?\u003c\/h3\u003e\n\u003cp\u003eYes — the BSTSLL wraps are rated to resist temperatures up to about 500°F (260°C). That tolerance covers most garment and substrate transfer processes without melting, warping, or losing their non-stick properties when used as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat resistance up to 500°F (260°C)\u003c\/li\u003e\n  \u003cli\u003eMaintains non-stick surface under repeated use\u003c\/li\u003e\n  \u003cli\u003eDesigned for typical textile and vinyl press temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I fit and clean the 15 x 15\" platen covers?\u003c\/h3\u003e\n\u003cp\u003eThe covers are flexible and sized to wrap around standard 15 x 15-inch press platens; the polyester backing stretches for an easy on\/off fit. To clean, simply wipe the teflon surface with a damp cloth or use the included towel to remove adhesive spots — no aggressive solvents required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStretchy backing makes installation quick and simple\u003c\/li\u003e\n  \u003cli\u003eWipe-clean teflon surface for fast maintenance\u003c\/li\u003e\n  \u003cli\u003eIncluded towel helps remove residue after each run\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kinds of wear and damage do these covers prevent?\u003c\/h3\u003e\n\u003cp\u003eThese platen wraps reduce abrasion and surface damage to both the upper and lower plates, protecting the silicone pad on the bottom platen and the metal upper plate from scratches, tears, and sticky contaminants. That protection helps preserve platen life and keeps transfer results consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGuards upper plate against adhesive, scorch marks, and ink build-up\u003c\/li\u003e\n  \u003cli\u003eProtects lower silicone pad from abrasion and punctures\u003c\/li\u003e\n  \u003cli\u003eReusable to cut down on platen maintenance and replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: BSTSLL 15 x 15\" Heat Press Covers are made for small business owners, hobbyists, crafters, and print shops that use a 15 x 15\" heat press and want a fast, cost-effective way to protect their platens. If you regularly press garments, transfer vinyl, sublimation prints, or heat-applied adhesives and want to reduce cleaning time and avoid platen damage, these breathable, high-temperature wraps are a practical accessory to keep production moving smoothly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these covers fit my 15 x 15 inch clamp-style press?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—they are sized for standard 15 x 15\" platens and the stretchy backing adapts to most clamp-style presses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I clean sticky residue off the covers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Wipe the teflon surface with a damp cloth or use the included towel; avoid harsh solvents to preserve the coating.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BSTSLL","offers":[{"title":"Default Title","offer_id":55253268758865,"sku":"B0DDCBNP3G","price":31.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/bstsll-front-view-15x15-heat-press-covers.jpg?v=1791657378"},{"product_id":"luxiys-htv-cooling-block-4x4-for-heat-press-fast-cooling-aluminum-handle","title":"Luxiys HTV Cooling Block 4\"x4\" for Heat Press — Fast Cooling, Aluminium Handle","description":"\u003cp\u003e\u003cstrong\u003eLuxiys HTV Cooling Block is a compact 4\"×4\" heat-absorbing tool that speeds up and evens out cooling of DTF, sublimation, and heat-transfer vinyl projects for cleaner, more consistent results.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you use a heat press for t-shirts, decals or sublimation work, rapid and controlled cooling is often the difference between a crisp print and one that shifts or traps moisture. The Luxiys cooling block pairs transparent, heat-absorbing material with an ergonomic aluminium handle and a patterned surface to pull heat away quickly. Lightweight and easy to store, it’s designed to fit into a busy workflow for hobbyists and small businesses alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Luxiys cooling block speed up my heat-press workflow?\u003c\/h3\u003e\n\u003cp\u003eThe block absorbs and disperses surface heat faster than waiting for items to cool naturally, cutting downtime between press cycles. Its built-in butterfly pattern increases surface area for faster heat transfer, and the transparent body lets you see the transfer while it cools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4\"×4\" size for small to medium transfers — quick placement and removal\u003c\/li\u003e\n  \u003cli\u003eTransparent heat-absorbing material for visual monitoring\u003c\/li\u003e\n  \u003cli\u003eButterfly-patterned face increases cooling contact and airflow\u003c\/li\u003e\n  \u003cli\u003eAluminium alloy handle for secure, comfortable manipulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this block work with DTF, sublimation paper, and HTV?\u003c\/h3\u003e\n\u003cp\u003eYes — the block is compatible with a wide range of heat-transfer processes without altering the transfer surface. It’s intended to be placed on top of freshly pressed transfers to reduce temperature and stabilise adhesives or inks before peeling or covering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for DTF transfers and powder-based prints when used as directed\u003c\/li\u003e\n  \u003cli\u003eSuitable for sublimation prints and heat transfer vinyl (HTV)\u003c\/li\u003e\n  \u003cli\u003eHelps prevent ink migration and tack-related blemishes when cooling rapidly\u003c\/li\u003e\n  \u003cli\u003eWorks with heat transfer paper and most film-based transfer types\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s the correct way to use and maintain the cooling block?\u003c\/h3\u003e\n\u003cp\u003eAfter pressing, set the block onto the warmed transfer and gently rock or slide the handle to increase contact. For stronger cooling, store the block in the refrigerator between uses — avoid submerging in water or placing in the freezer for prolonged periods to preserve material integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlace on the transfer immediately after opening the heat press\u003c\/li\u003e\n  \u003cli\u003eMove the handle back and forth to accelerate heat absorption\u003c\/li\u003e\n  \u003cli\u003eRefrigerate for improved cooling before busy runs; do not freeze overnight\u003c\/li\u003e\n  \u003cli\u003eWipe clean with a damp cloth; avoid harsh solvents or abrasive pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and portable is the Luxiys cooling block for studio use?\u003c\/h3\u003e\n\u003cp\u003eThe tool combines a resilient heat-absorbing body with a sturdy aluminium-alloy handle for everyday use in small shops or home studios. Its compact footprint makes it easy to store on a shelf or in a refrigerator between jobs without taking up much space.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust construction designed for repeated press cycles\u003c\/li\u003e\n  \u003cli\u003eCompact 4\"×4\" format fits most transfer sizes and storage spots\u003c\/li\u003e\n  \u003cli\u003eLightweight for one-handed operation and fast repositioning\u003c\/li\u003e\n  \u003cli\u003ePatterned face resists slipping while increasing cooling efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this tool is for: The Luxiys HTV Cooling Block is aimed at garment decorators, small printing businesses, craft makers and serious hobbyists who want faster turnaround times and more consistent transfer finishes. If you routinely press t-shirts, mugs, or substrate transfers and need a reliable way to accelerate cooling without adding complexity, this compact cooling block is a practical addition to your heat-press accessories.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the cooling block immediately after pressing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Place it on the warm transfer and gently move the handle to speed cooling; refrigerating the block beforehand improves performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Luxiys block safe for all heat-transfer materials?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It works with DTF, sublimation, HTV and heat-transfer paper when used as directed, avoiding harsh solvents and extreme freezer exposure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Luxiys","offers":[{"title":"Default Title","offer_id":55253317615953,"sku":"B0F4RQ3SCY","price":31.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/luxiys-cooling-block-front-view.jpg?v=1791657773"},{"product_id":"vchomy-15x15-heat-press-mat-15x15-inch-silicone-heat-resistant-platen-pad-for-even-htv-sublimation-transfers","title":"VCHOMY 15x15 Heat Press Mat - 15x15 inch Silicone Heat-Resistant Platen Pad for Even HTV \u0026 Sublimation Transfers","description":"\u003cp\u003e\u003cstrong\u003eThe VCHOMY 15x15 Heat Press Mat is a moulded, high-temperature silicone pad designed to deliver even heat and pressure for crisp HTV, sublimation, and iron-on transfers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you make custom apparel, tote bags, or home decor with a 15x15 heat press, the right platen pad matters. Unlike cheap die-cut foam or roll-cut silicone, this VCHOMY pad is produced by one-piece compression moulding to ensure uniform thickness, stable elasticity, and burr-free edges. That consistent surface reduces hotspots, prevents local indentations, and helps protect your heat press platen from ink, glue, and scorch marks while improving transfer results.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this mat improve transfer quality?\u003c\/h3\u003e\n\u003cp\u003eThe moulded silicone surface distributes heat and pressure evenly across the entire 15x15 area, which minimizes blurred prints, incomplete adhesion, and uneven impressions. Its high elasticity rebounds after compression so the substrate sees consistent pressure for repeatable results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUniform density across the whole pad for predictable heat transfer\u003c\/li\u003e\n  \u003cli\u003eHigh compression resilience avoids permanent indentations\u003c\/li\u003e\n  \u003cli\u003eSmooth, burr-free edges reduce snagging and misalignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my 15x15 heat press and protect the platen?\u003c\/h3\u003e\n\u003cp\u003eYes — the pad is sized to match standard 15x15 inch presses and acts as a protective barrier between the platen and your projects. It blocks ink, glue, and residue from reaching the machine while withstanding high temperatures up to 260°C (500°F).\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact 15 x 15 inch (38 x 38 cm) footprint for common presses\u003c\/li\u003e\n  \u003cli\u003eWaterproof, heavy-duty silicone keeps platen clean\u003c\/li\u003e\n  \u003cli\u003eEasy to wipe down after use to remove ink or adhesive\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is the silicone material?\u003c\/h3\u003e\n\u003cp\u003eManufactured from industrial-grade silicone foam using custom compression moulding, the pad resists expansion and deformation that plague cut-style mats. The material tolerates high heat while remaining flexible and non-slip, delivering long-term dimensional stability for regular crafting sessions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustrial-grade silicone foam with high temperature resistance\u003c\/li\u003e\n  \u003cli\u003eNon-slip surface for secure positioning of garments and blanks\u003c\/li\u003e\n  \u003cli\u003eCompression-molded as a single piece to prevent edge warping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I customize the pad size or manage odour concerns?\u003c\/h3\u003e\n\u003cp\u003eThe VCHOMY mat is easy to trim with scissors, so you can tailor the pad to smaller press sizes or cut custom shapes. If you notice a factory scent on arrival, simple airing or wiping with a baking soda solution typically removes residual odour.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCuttable for custom sizes without damaging performance\u003c\/li\u003e\n  \u003cli\u003eRecommended airing and mild cleaning to dissipate any initial odour\u003c\/li\u003e\n  \u003cli\u003ePackaged improved to reduce scent in later batches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The VCHOMY 15x15 Heat Press Mat is made for home crafters, small-shop decorators, and hobbyists who want reliable, repeatable results from HTV, sublimation, and iron-on work. If you value consistent heat distribution, platen protection, and a tidy workspace, this moulded silicone pad is a practical upgrade to cut-style foam alternatives.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this pad safe at high press temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The VCHOMY silicone mat withstands up to 260°C (500°F) and maintains elasticity under repeated heating.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I cut the mat to fit smaller presses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The pad is easily trimmed with scissors to the size you need without sacrificing performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VCHOMY","offers":[{"title":"Default Title","offer_id":55253470609745,"sku":"B0D2R7VY3H","price":49.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/vchomy-heat-press-mat-front-view.jpg?v=1791659278"},{"product_id":"leelosp-36-pack-sublimation-canvas-blanks-8-5-x-11-in-white-oxford-cloth-heat-transfer-ready-for-vibrant-photo-prints","title":"Leelosp 36-Pack Sublimation Canvas Blanks 8.5 x 11 in — White Oxford Cloth, Heat-Transfer Ready for Vibrant Photo Prints","description":"\u003cp\u003e\u003cstrong\u003eLeelosp 36 Pcs Sublimation Canvas Blanks are 8.5 x 11-inch printable oxford-cloth sheets designed for heat-transfer photo and artwork printing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you make custom framed prints, memory collages, or small-format art, these 36 white sublimation canvases give you a consistent, easy-to-print substrate that holds vibrant colour and a fine textured finish. Each sheet measures approximately 8.5 x 11 inches and is optimised for transfer printing so you can produce vivid photos, decorative panels, and keepsakes for gifts or display.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these canvases perform with heat transfer printing?\u003c\/h3\u003e\n\u003cp\u003eThe sheets are woven oxford-cloth formulated for dye-sublimation and heat transfer processes, producing sharp, fade-resistant images when pressed at recommended settings. They remain flexible and flat so they feed well through cutters and are easy to mount into frames after printing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended press: 200°C (392°F) for 45–60 seconds as a starting point\u003c\/li\u003e\n  \u003cli\u003eMaterial: white oxford-cloth with fine texture for photo detail\u003c\/li\u003e\n  \u003cli\u003eResult: vivid colours and accurate colour reproduction\u003c\/li\u003e\n  \u003cli\u003eCompatibility: standard heat presses and cutting machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I cut, bind, or frame these sheets for finished projects?\u003c\/h3\u003e\n\u003cp\u003eYes — the canvases are flexible and paper-like rather than rigid, making them simple to trim, fold, bind, or adhere to backing boards and frames. Their smooth, flat surface helps glue and mounting tape adhere cleanly without buckling the print.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrim-friendly: snip with rotary cutters, guillotine, or scissors\u003c\/li\u003e\n  \u003cli\u003eMounting: bonds well to foamcore, MDF panels, or picture frames\u003c\/li\u003e\n  \u003cli\u003eFinishing: great for framing, scrapbooks, gift cards, and small murals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat creative uses work best with these 8.5 x 11 canvases?\u003c\/h3\u003e\n\u003cp\u003eThese sheets are ideal for small-format photography, personalised gifts, event keepsakes, and sample prints. They make quick prototypes for product shots, wedding table decor, or classroom art projects where consistent results and colour fidelity matter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePhoto frames and gallery walls: standard 8.5 x 11 display-ready prints\u003c\/li\u003e\n  \u003cli\u003eGifts: custom birthday, anniversary, and wedding mementos\u003c\/li\u003e\n  \u003cli\u003eDecor: mini murals, signage, and layered mixed-media art\u003c\/li\u003e\n  \u003cli\u003ePrototyping: colour-accurate samples for client approvals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Leelosp's 36-pack of 8.5 x 11 sublimation canvas blanks serves hobbyists, crafters, photographers, and small-business creators who need a reliable, printable textile that produces vibrant, long-lasting images. If you produce framed prints, personalised merchandise, or classroom and event projects that require consistent colour and a textured, professional finish, this bundle gives you ample sheets to experiment, replace, and share without frequent reorders.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperature and time work best for sublimation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Start at 200°C (392°F) for 45–60 seconds, then adjust based on your press and ink for optimal saturation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these sheets compatible with cutters and heat presses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they feed and cut easily and work with most standard heat transfer machines and cutting tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Leelosp","offers":[{"title":"Default Title","offer_id":55253520286033,"sku":"B09Y1QBZPK","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/leelosp-front-packaging-36pcs.jpg?v=1791659934"},{"product_id":"zocone-sublimation-tumbler-wrap-set-for-cricut-mug-press-3-thickness-green-silicone-sleeves-with-gloves-heat-tape","title":"ZOCONE Sublimation Tumbler Wrap Set for Cricut Mug Press — 3-Thickness Green Silicone Sleeves with Gloves \u0026 Heat Tape","description":"\u003cp\u003e\u003cstrong\u003eZOCONE's green silicone wrap set is a three-thickness sublimation sleeve kit sized 9.8 x 4.7 inches to hold mugs and tumblers steady and transfer heat evenly in Cricut Mug Press and similar heat presses.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're customizing a single travel mug or running a small batch of tumblers, the right sleeve makes a measurable difference. This kit bundles three silicone wrap thicknesses with two protective gloves and heat-resistant tape so you can secure transfers, reduce image shifting, and improve colour contact during press time. The wraps are flexible enough to conform to curved surfaces yet durable for repeated use.\u003c\/p\u003e\n\n\u003ch3\u003eHow do the three thicknesses help with different tumblers?\u003c\/h3\u003e\n\u003cp\u003eDifferent vessel wall thicknesses and diameters need varying compression to hold the transfer paper flat. The set includes thin, medium and thick sleeves so you can match wrap compression to your mug or tumbler for a tighter, more consistent print.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e0.13 in: best for thin-walled or smaller-diameter tumblers to avoid over-compression.\u003c\/li\u003e\n  \u003cli\u003e0.16 in: medium option for most standard ceramic mugs and standard tumblers.\u003c\/li\u003e\n  \u003cli\u003e0.17 in: thicker wrap for larger or irregular shapes that need extra hold.\u003c\/li\u003e\n  \u003cli\u003eCombine two wraps when extra pressure or protection is required for very thin or uneven vessels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these wraps work with my Cricut Mug Press or other heat presses?\u003c\/h3\u003e\n\u003cp\u003eYes — the sleeves are designed to be compatible with the Cricut Mug Press and many tumbler heat-press machines. Their size and flexibility let them seat a variety of mug shapes while the silicone transfers heat efficiently without damaging the vessel surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e9.8 x 4.7 inch dimensions fit most standard mug press cavities.\u003c\/li\u003e\n  \u003cli\u003eSilicone composition tolerates repeated press cycles and high temperature exposure.\u003c\/li\u003e\n  \u003cli\u003eUse the included tape to secure sublimation paper before wrapping and pressing.\u003c\/li\u003e\n  \u003cli\u003eGloves reduce burn risk when removing hot projects from the press.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the silicone wraps to get a clean sublimation result?\u003c\/h3\u003e\n\u003cp\u003ePreparation and tension are key: align your transfer, tape it flat, then slide the appropriate-thickness sleeve over the cup so the paper remains taut. Place the wrapped mug into the press and follow your transfer paper and ink manufacturer guidelines for time and temperature.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCentre and tape the sublimation design to prevent shifting during press time.\u003c\/li\u003e\n  \u003cli\u003eSlide the sleeve fully over the cup for even pressure across the image area.\u003c\/li\u003e\n  \u003cli\u003eWear the included gloves to remove the hot cup and let it cool undisturbed.\u003c\/li\u003e\n  \u003cli\u003eSwap sleeve thicknesses or double-wrap if print shows uneven contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Hobbyists, crafters and small-business makers who use the Cricut Mug Press or compatible heat presses and want more control over transfer stability and contact during sublimation. The kit suits beginners learning press techniques and experienced sellers aiming for more consistent colour and fewer misaligned prints. It’s especially useful for anyone working with a range of cup sizes, thin-walled tumblers, or irregular shapes that need tailored compression to get the best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these silicone wraps compatible with Cricut Mug Press?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 9.8 x 4.7 inch silicone sleeves are designed to work with Cricut Mug Press and many similar tumbler heat-press machines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use more than one wrap at once for thin mugs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. You can stack two wraps to increase pressure and protect very thin-walled or oddly shaped mugs for better print contact.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ZOCONE","offers":[{"title":"Default Title","offer_id":55253555773777,"sku":"B0BD78MDLD","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/zocone-front-packaging-wraps-gloves-tape.jpg?v=1791660344"},{"product_id":"vchomy-15x15-inch-teflon-platen-covers-2-pack-non-stick-heat-resistant-protector-for-sublimation-htv","title":"VCHOMY 15x15 Inch Teflon Platen Covers - 2-Pack Non-Stick Heat-Resistant Protector for Sublimation \u0026 HTV","description":"\u003cp\u003e\u003cstrong\u003eVCHOMY's two-pack 15x15-inch Teflon platen covers are heat-resistant, non-stick protectors that shield your heat-press platens from inks, adhesives and wear during sublimation and HTV transfers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you use a heat-press for sublimation, vinyl, or transfer printing, these platen wraps slip over a 15×15-inch platen to block residue, prevent sticking and extend the life of your machine’s surfaces. The covers combine an elastic polyester backing with a fibreglass Teflon surface rated for high temperatures, and are offered as a set of two so you can protect both upper and lower platens (with an exception for bottom platens that have a front handle).\u003c\/p\u003e\n\n\u003ch3\u003eWill these covers fit my 15×15-inch heat-press platen?\u003c\/h3\u003e\n\u003cp\u003eMeasure your platen before purchasing to confirm a proper fit; the wrap is designed for 15×15-inch platens and stretches slightly thanks to the elastic polyester backing. Some wrinkling or small loose corners can occur because of the construction, but that does not affect protection or performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 15×15-inch platens; confirm measurements first.\u003c\/li\u003e\n  \u003cli\u003eElastic polyester backing accommodates minor size variation.\u003c\/li\u003e\n  \u003cli\u003eNot recommended for bottom platens with a front handle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow well does the VCHOMY Teflon cover handle high temperatures and sticky residue?\u003c\/h3\u003e\n\u003cp\u003eThe fibreglass Teflon surface resists temperatures up to about 500°F, protecting platens and silicone lower pads from inks, adhesives and HTV residue without bonding to materials. It provides a non-stick work surface that simplifies transfers and reduces cleanup between jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-resistant up to roughly 500°F for common heat-transfer jobs.\u003c\/li\u003e\n  \u003cli\u003eNon-stick Teflon face reduces scorching and material adhesion.\u003c\/li\u003e\n  \u003cli\u003eProtects both upper platen and lower silicone pad from wear and residue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the platen wrap for reliable use?\u003c\/h3\u003e\n\u003cp\u003eInstallation is quick: stretch the elasticized polyester edge over the platen and smooth the Teflon face. To clean, simply wipe away residue with a damp cloth; regular cleaning keeps transfers consistent and helps the cover reach its long-use expectancy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEasy-to-fit elastic polyester backing—pull on and smooth into place.\u003c\/li\u003e\n  \u003cli\u003eWipe-clean Teflon surface removes inks and adhesives with a damp cloth.\u003c\/li\u003e\n  \u003cli\u003eDurable construction supports repeated use—rated for many cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will the VCHOMY platen cover last and what should I expect over time?\u003c\/h3\u003e\n\u003cp\u003eMade from premium materials, these covers are built for repeated use and designed to withstand many heat cycles without breaking down. You may notice natural wear, slight wrinkling, or edge looseness with heavy use, but the protective function remains intact for a long service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed from heat-resistant Teflon and elastic polyester for durability.\u003c\/li\u003e\n  \u003cli\u003eEngineered for long-term use through many heat-transfer jobs.\u003c\/li\u003e\n  \u003cli\u003eMinor aesthetic changes like wrinkling do not impair performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VCHOMY’s 2-pack 15×15-inch Teflon platen covers suit hobbyists and small businesses that run sublimation, HTV or transfer printing on a 15×15-inch platen. Choose this set if you want straightforward, reusable non-stick protection for both upper and lower platens (except bottom platens with front handles), easier cleanup between jobs, and a way to reduce platen wear from inks and adhesives.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these covers on both the top and bottom platens?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this two-pack covers upper and lower platens, but it's not suitable for bottom platens with a front handle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I clean the Teflon platen cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Wipe the Teflon surface with a damp cloth to remove inks and adhesives; avoid abrasive cleaners.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VCHOMY","offers":[{"title":"Default Title","offer_id":55253666431313,"sku":"B0CNKDYFBJ","price":31.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/vchomy-front-view-15x15-platen-cover.jpg?v=1791662274"},{"product_id":"cruzix-heat-resistant-tape-for-sublimation-10-rolls-10mm-x-33m-high-temp-polyimide-no-residue-adhesive","title":"Cruzix Heat Resistant Tape for Sublimation 10 Rolls — 10mm x 33m, High-Temp Polyimide, No-Residue Adhesive","description":"\u003cstrong\u003eCruzix 10 Rolls Heat Resistant Tape (10mm x 33m) is a high-temperature polyimide tape set designed for sublimation, heat-press work, electronics and soldering that peels cleanly with minimal residue.\u003c\/strong\u003e\n\n\u003cp\u003eThis kit includes ten narrow 10mm by 33m (108ft) rolls of polyimide heat-resistant tape engineered for repeat use on heat presses, mug wraps and delicate electronic work. The tape tolerates high continuous temperatures, offers strong adhesion during transfer jobs, and removes without leaving sticky residue — making it practical for hobbyists and small businesses handling vinyl, sublimation, and wiring repair.\u003c\/p\u003e\n\n\u003ch3\u003eHow hot can Cruzix heat resistant tape handle during sublimation?\u003c\/h3\u003e\n\u003cp\u003eThe polyimide construction performs reliably at very high temperatures. Maximum short-term resistance reaches around 573°F (300°C), while longer continuous performance is stable near 536°F (280°C). That temperature range covers most heat-press and mug-sublimation applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum short exposure: ~573°F \/ 300°C\u003c\/li\u003e\n  \u003cli\u003eContinuous use comfort zone: ~536°F \/ 280°C\u003c\/li\u003e\n  \u003cli\u003eSuitable for heavy-duty heat-press and mug wrap processes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the tape leave residue on vinyl, sublimation paper, or mugs?\u003c\/h3\u003e\n\u003cp\u003eCruzix high-temp tape is formulated to peel cleanly so transfers remain tidy and reusable surfaces are preserved. In normal use it releases without sticky traces, reducing rework and cleanup time. For best results, allow items to cool slightly before removal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for no-residue removal on fabric, vinyl and coated ceramics\u003c\/li\u003e\n  \u003cli\u003eEasy-peel tack minimizes distortion or shifting of transfers\u003c\/li\u003e\n  \u003cli\u003eWorks well with adhesive vinyl, transfer paper and sublimation media\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use these rolls for electronics, wiring, and soldering tasks?\u003c\/h3\u003e\n\u003cp\u003eYes — polyimide tape is commonly used in electronics for insulation and protection during soldering or wave-solder operations. The tape provides electrical insulation and thermal stability, protecting nearby components and holding small assemblies in place.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eElectrical insulation for wiring and harness bundling\u003c\/li\u003e\n  \u003cli\u003eProtects components from heat during soldering\u003c\/li\u003e\n  \u003cli\u003ePeels away cleanly to avoid residue on circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow many rolls and what length do I get, and how long will they last?\u003c\/h3\u003e\n\u003cp\u003eThis pack contains ten rolls, each 10mm wide and 33m (108ft) long, offering a large supply for repetitive projects. The slim width is ideal for precise placement around mugs, small crafts and tight electronic seams. One roll lasts many small transfers; ten rolls support extended production or multiple users.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: 10 rolls per package\u003c\/li\u003e\n  \u003cli\u003eDimensions: 10mm width × 33m (108ft) length per roll\u003c\/li\u003e\n  \u003cli\u003eGood value for continuous crafting or small-batch commercial use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Cruzix 10-roll heat resistant tape set suits crafters doing sublimation and heat-press on mugs, apparel and small items, plus hobbyists and electronics technicians who need a reliable insulating tape for soldering and wiring work. If you run a small print shop, make custom drinkware, or perform delicate electronics repairs, this kit delivers heat tolerance, clean removal and enough roll length to keep projects moving without frequent reorders.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this tape safe for mug sublimation at high temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The polyimide tape withstands up to about 573°F (300°C) short-term and peels clean for typical mug sublimation workflows.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the adhesive leave a sticky residue after removal?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Cruzix high-temp tape is formulated to remove cleanly in normal use, minimizing residue on vinyl, fabric and coated ceramics.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Cruzix","offers":[{"title":"Default Title","offer_id":55253704638801,"sku":"B08XWZL3KR","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/cruzix-front-packaging-10-rolls.jpg?v=1791663003"},{"product_id":"htvront-sublimation-keychain-blanks-30-pack-mdf-double-sided-rectangles-with-blue-protective-film-and-tassels","title":"HTVRONT Sublimation Keychain Blanks 30 Pack — MDF Double-Sided Rectangles with Blue Protective Film and Tassels","description":"\u003cp\u003e\u003cstrong\u003eHTVRONT Sublimation Keychain Blanks are a ready-to-press kit of 30 double-sided MDF rectangle blanks plus hardware and tassels, designed for crisp, full-colour sublimation projects.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one set supplies everything crafters need to make personalised, durable keychains quickly: coated MDF blanks with a removable blue protective film, jump rings, key rings, colourful tassels, and packaging boards. The blanks accept dye-sublimation transfers for vibrant, long-lasting prints and come vacuum-packed to prevent damage in transit. Transfer instructions and a template are included to help beginners and experienced makers get consistent results.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these blanks produce vivid, long-lasting prints?\u003c\/h3\u003e\n\n\u003cp\u003eThe MDF rectangles are factory-coated for sublimation, providing a smooth, receptive surface that captures dye-sublimation inks with strong colour density and edge-to-edge coverage. Because the coating bonds with sublimation dyes when heated, images retain clarity and saturation after transfer.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePremium sublimation-friendly coating for sharp colour reproduction\u003c\/li\u003e\n  \u003cli\u003eDouble-sided printing capability for two-faced designs\u003c\/li\u003e\n  \u003cli\u003eVacuum-packed to reduce chips, scratches, and moisture during shipping\u003c\/li\u003e\n  \u003cli\u003eBlue protective film simplifies alignment and removal before pressing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and how easy is assembly?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit contains 30 MDF rectangle blanks plus matching hardware and packaging—30 tassels, 30 jump rings, 30 key rings, and 30 backing boards and bags—giving you a complete production-ready bundle. Assembly is straightforward: remove the protective film on the side to be sublimated, press your design, then attach the jump ring, tassel, and key ring.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e30 coated MDF rectangles for double-sided designs\u003c\/li\u003e\n  \u003cli\u003e30 colourful tassels for a finished, professional look\u003c\/li\u003e\n  \u003cli\u003e30 jump rings and 30 key rings for quick assembly\u003c\/li\u003e\n  \u003cli\u003eIncluded template and instructions speed up setup and consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the recommended heat press settings and tips for best results?\u003c\/h3\u003e\n\n\u003cp\u003eFor reliable transfers, use the suggested parameters as a starting point and test one blank first: 180°C (356°F) for 40–45 seconds typically yields strong, even transfers. Always remove the blue protective film on the printing side before pressing and use heat-resistant tape to secure your sublimation paper if needed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRecommended temperature: 180°C \/ 356°F\u003c\/li\u003e\n  \u003cli\u003eRecommended time: 40–45 seconds per press\u003c\/li\u003e\n  \u003cli\u003ePeel protective film from the side being sublimated before pressing\u003c\/li\u003e\n  \u003cli\u003eUse test prints to dial in time\/pressure for your press model\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and gift-ready are the finished keychains?\u003c\/h3\u003e\n\n\u003cp\u003eAfter sublimation and assembly, the MDF blanks produce lightweight, portable keychains that stand up to daily use while keeping colours vibrant. The included tassels and packaging boards make completed pieces look polished and gift-ready without extra materials.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLightweight MDF construction feels sturdy in hand\u003c\/li\u003e\n  \u003cli\u003eCoating locks in dye for lasting colour and reduced fading\u003c\/li\u003e\n  \u003cli\u003eTassels add a decorative, professional finish\u003c\/li\u003e\n  \u003cli\u003eIndividual packaging boards and bags simplify gifting or resale\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: HTVRONT Sublimation Keychain Blanks are ideal for small-batch makers, crafters selling at markets, hobbyists learning sublimation, and gift designers who want a turnkey kit. If you produce personalised merchandise, need consistent sublimation surfaces, or want a complete assembly-ready kit to offer colourful keychains, this set provides the coated blanks and hardware to start printing and finishing right away.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to remove the blue film before pressing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Remove the blue protective film on the side to be sublimated before pressing; leave the other side covered if not printing double-sided.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the recommended press settings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Start with 180°C (356°F) for 40–45 seconds and test one blank to adjust for your heat press and pressure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HTVRONT","offers":[{"title":"Default Title","offer_id":55253719777617,"sku":"B09YHL4C6P","price":31.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/htvront-front-packaging-keychain-kit.jpg?v=1791663487"},{"product_id":"quklogen-sublimation-shirt-tool-kit-12-pvc-rulers-3-teflon-sheets-heat-resistant-alignment-set","title":"QUKLOGEN Sublimation Shirt Tool Kit — 12 PVC Rulers, 3 Teflon Sheets, Heat-Resistant Alignment Set","description":"\u003cp\u003e\u003cstrong\u003eQUKLOGEN Sublimation Shirts Tool Kits is a complete accessory set that organizes rulers, heat-resistant supplies, and positioning tools to speed and simplify T‑shirt heat press and sublimation alignment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you design custom shirts at home or run a small print shop, accuracy and protection are essential. This kit assembles everything needed to centre graphics on round and V‑neck tees, safeguard your press surface, and hold transfers steady during pressing. The components are compact, reusable, and made for frequent use so you spend less time guessing placement and more time producing finished garments.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit help me align designs on different necklines?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes twelve small PVC rulers sized for both round and V neck styles, each clearly marked with measurement guides. Use the appropriate ruler to centre images quickly and repeatably across multiple shirt sizes for consistent results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12 reusable PVC rulers for round and V neck alignment\u003c\/li\u003e\n  \u003cli\u003eEasy-to-read numbers and markers for fast centering\u003c\/li\u003e\n  \u003cli\u003eSmall, lightweight rulers fit inside shirts for internal placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection and holding tools are included for heat pressing?\u003c\/h3\u003e\n\u003cp\u003eQUKLOGEN supplies heat-resistant accessories so your platen and garments stay protected from direct heat and adhesive transfer. Teflon sheets and heat-resistant tape prevent sticking while gloves and silicone bumps shield hands and improve grip.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree durable 12 x 16 in Teflon sheets to protect the press and transfers\u003c\/li\u003e\n  \u003cli\u003eTwo rolls of heat-resistant tape to secure designs during pressing\u003c\/li\u003e\n  \u003cli\u003eOne pair of heat-resistant gloves with silicone bumps for safe handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich small tools help with precise placement and finishing?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a variety of positioning and trimming tools aimed at fine adjustments and tidy edges. Pins and scrapers keep layers flat while a cutting knife and mini pruning tool allow tailored trimming for custom shapes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e40 positioning pins for holding layers and fabric in place\u003c\/li\u003e\n  \u003cli\u003eFleece scraper and two small scrapers to smooth transfers and remove air bubbles\u003c\/li\u003e\n  \u003cli\u003eFilm cutting knife, mini pruning tool, pencil set and sharpener for template marking and trimming\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this kit be used by hobbyists and small businesses?\u003c\/h3\u003e\n\u003cp\u003eThe tool set was designed for hobbyists learning heat transfer and for small operations that need repeatable alignment without investing in custom fixtures. It combines protective materials with layout aids so both one-off projects and short production runs are faster and neater.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for home craft projects, startups, and small print shops\u003c\/li\u003e\n  \u003cli\u003eReusable components reduce consumable costs for frequent use\u003c\/li\u003e\n  \u003cli\u003eCompact kit keeps essential tools together for mobile setups or events\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Makers who create custom T‑shirts, event apparel, or personalised gifts will appreciate the QUKLOGEN Sublimation Shirts Tool Kits. Beginners gain confidence with easy-to-use rulers and holding tools, while experienced printers get reliable protection and repeatable placement for small batches. If you want faster setup, fewer alignment errors, and durable accessories that travel with your press, this kit is built to support both creative practice and light production work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the rulers reusable and washable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the PVC rulers are reusable and can be wiped clean; avoid soaking to preserve printed markings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What maximum temperature do the Teflon sheets withstand?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Teflon sheets resist high heat and are suitable for typical heat press temperatures up to about 260°C (500°F).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QUKLOGEN","offers":[{"title":"Default Title","offer_id":55254092054865,"sku":"B0FR1NPCX6","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/quklogen-front-packaging-kit.jpg?v=1791668630"},{"product_id":"reart-heat-press-mat-15-x-15-for-cricut-easypress-dual-sided-heat-resistant-work-surface","title":"ReArt Heat Press Mat 15\" x 15\" for Cricut EasyPress — Dual-Sided, Heat-Resistant Work Surface","description":"\u003cp\u003e\u003cstrong\u003eReArt 15\" x 15\" Heat Press Mat is a dual-sided work surface designed to give heat-transfer projects a smooth, even base for Cricut EasyPress, irons, and small heat-press machines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re pressing heat-transfer vinyl (HTV), iron-on decals, or small sublimation pieces, a stable, heat-resistant mat makes a noticeable difference. The ReArt 15\" x 15\" mat fits most EasyPress and compact heat-press setups and is engineered to reduce moisture and concentrate heat on your design area so transfers come out cleaner and more consistent.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the ReArt mat improve transfer consistency?\u003c\/h3\u003e\n\n\u003cp\u003eThe mat provides a flat, uniform surface that reduces movement and prevents texture from embossing into your transfer. Both sides of the mat are usable, offering consistent heat conduction and pressure distribution so your HTV adheres more evenly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e15\" x 15\" size fits small presses and most EasyPress models\u003c\/li\u003e\n  \u003cli\u003eDual-sided design lets you choose the best surface for your material\u003c\/li\u003e\n  \u003cli\u003eEngineered to limit moisture that can affect adhesion\u003c\/li\u003e\n  \u003cli\u003eHelps concentrate heat where the design sits for better bonding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this mat protect my work surface and garment?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the ReArt mat creates a thermal and physical barrier between your heat source and the table beneath, protecting surfaces from heat marks and spills. It also provides a stable platform that reduces shifting of fabric during pressing, which helps maintain clean edges and prevents accidental burns to delicate materials.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-resistant construction shields tables and countertops\u003c\/li\u003e\n  \u003cli\u003eNon-slip feel helps keep fabrics and transfers steady\u003c\/li\u003e\n  \u003cli\u003eCompact square covers typical press area without excess bulk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the mat work with different machines and materials?\u003c\/h3\u003e\n\n\u003cp\u003eThe 15\" x 15\" size and even heat conduction are suitable for Cricut EasyPress, home irons, and many small clamshell heat presses. It’s designed for HTV, standard iron-on transfers, and similar craft materials; adjust time and temperature per your transfer material and machine instructions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Cricut EasyPress and household irons\u003c\/li\u003e\n  \u003cli\u003eWorks well for HTV, iron-on vinyl, and small sublimation projects\u003c\/li\u003e\n  \u003cli\u003eUse manufacturer’s heat settings for different materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I care for and store the ReArt heat press mat?\u003c\/h3\u003e\n\n\u003cp\u003eKeep the mat flat and clean for best performance. Wipe it with a damp cloth to remove debris and store it away from direct sunlight and extreme heat to maintain its shape and effectiveness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWipe clean with mild soap and water; air dry completely\u003c\/li\u003e\n  \u003cli\u003eStore flat or rolled gently—avoid sharp folds\u003c\/li\u003e\n  \u003cli\u003eKeep away from open flames and prolonged direct heat exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Crafters and small-business makers who use Cricut EasyPress, home irons, or compact heat presses for HTV and iron-on projects. The ReArt 15\" x 15\" mat is especially useful if you want a reusable, dual-sided work surface that reduces moisture and helps concentrate heat for neater transfers across shirts, tote bags, hats, and other fabric items.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this mat safe for Cricut EasyPress?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 15\" x 15\" size and heat-resistant construction suit Cricut EasyPress and small heat presses; follow your device temperature guidelines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use both sides of the mat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The mat is dual-sided for flexible use; choose the side that best matches your fabric and transfer technique.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ReArt","offers":[{"title":"Default Title","offer_id":55254128951633,"sku":"B08G8FCC5N","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/reart-front-view-mat-packaging.jpg?v=1791669158"},{"product_id":"worklion-heat-press-mat-13x17-large-heat-resistant-easypress-mat-with-flat-stable-surface","title":"WORKLION Heat Press Mat 13x17 — Large Heat-Resistant EasyPress Mat with Flat, Stable Surface","description":"\u003cstrong\u003eWORKLION Heat Press Mat 13\" x 17\" is a large, heat-resistant ironing mat designed to protect surfaces and provide a flat, stable base for EasyPress, EasyPress 2 and other heat press machines when applying vinyl and heat-transfer designs.\u003c\/strong\u003e\n\n\u003cp\u003eThis 13 x 17-inch mat gives hobbyists and small businesses a dependable workspace for heat-transfer projects. Built from double-sided, high-temperature materials, the mat helps distribute heat evenly, resists moisture, and prevents scorching of your tabletop. Its dense interlocking fibres keep fabrics flat and reduce stretching so iron-on transfers and HTV applications sit correctly on shirts, bags, banners and quilts.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the WORKLION mat protect my work surface and projects?\u003c\/h3\u003e\n\u003cp\u003eThe mat is engineered to shield counters from heat and moisture while offering a thermal barrier during pressing. Both sides tolerate temperatures up to 428°F (220°C), minimizing risk of heat bleed-through and surface damage. The durable cover also spreads heat so transfers finish more evenly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-temperature resistant material rated to 428°F (220°C)\u003c\/li\u003e\n  \u003cli\u003eDouble-sided construction for extended lifespan\u003c\/li\u003e\n  \u003cli\u003eInsulates tabletop from heat and moisture\u003c\/li\u003e\n  \u003cli\u003eEven heat distribution for consistent transfers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this mat work with Cricut EasyPress and other small heat presses?\u003c\/h3\u003e\n\u003cp\u003eYes — the 13\" x 17\" size is compatible with Cricut EasyPress, EasyPress 2 and most compact heat presses used for apparel crafts. It provides a flat surface large enough for medium-sized designs and stabilises fabric to prevent shifting during pressing. Use it for T-shirts, sweatshirts, aprons and craft banners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSized for medium heat-press projects and EasyPress models\u003c\/li\u003e\n  \u003cli\u003eKeeps fabric flat to reduce stretching and misalignment\u003c\/li\u003e\n  \u003cli\u003eWorks well under small platen heat presses and irons\u003c\/li\u003e\n  \u003cli\u003eUseful for layered or multi-press designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and easy to use is the WORKLION Heat Press Mat?\u003c\/h3\u003e\n\u003cp\u003eThe mat is lightweight yet thick enough to create a steady pressing surface. Dense, interlocking fibres resist deformation and stretching, so the mat maintains its shape through repeated use. The cover cleans easily and the mat stores flat when not in use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThick, lightweight core for a stable pressing platform\u003c\/li\u003e\n  \u003cli\u003eDense fibres prevent stretching and wear over time\u003c\/li\u003e\n  \u003cli\u003eSimple care: wipe clean and store flat\u003c\/li\u003e\n  \u003cli\u003ePortable and easy to position under a heat press\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical projects benefit most from this mat?\u003c\/h3\u003e\n\u003cp\u003eThe mat is versatile across sewing, quilting, embroidery, DIY apparel and home-decor transfers. It’s ideal when you need to protect a table while pressing vinyl, HTV, or transfer paper onto fabric. Use it for hobby crafting, small-batch production, school projects and fabric sample testing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIron-on vinyl (HTV) and printed transfer paper applications\u003c\/li\u003e\n  \u003cli\u003eT-shirt, sweatshirt and vest pressing\u003c\/li\u003e\n  \u003cli\u003eSewing, quilting and embroidery project pressing\u003c\/li\u003e\n  \u003cli\u003eBanner, blanket and craft board heat transfers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Crafters, makers and small-business owners who use Cricut EasyPress or similar heat presses and need a reliable, heat-resistant surface for medium-sized transfer work. If you press apparel, create vinyl decals, or frequently work with fabrics that require even heat and surface protection, the WORKLION 13\" x 17\" mat gives a practical, long-lasting base that improves press results and protects your workspace.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the WORKLION mat safe for Cricut EasyPress temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Both sides tolerate up to 428°F (220°C), suitable for Cricut EasyPress and similar small heat presses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this mat for quilting and sewing projects?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It provides a flat, heat-resistant surface ideal for quilting, sewing, embroidery and ironing transfers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKLION","offers":[{"title":"Default Title","offer_id":55254151135569,"sku":"B09GY29K3Q","price":32.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/worklion-front-packaging-13x17-mat.jpg?v=1791669935"},{"product_id":"quklogen-sublimation-shirt-tool-kit-12-neck-centering-rulers-3-teflon-sheets-gloves-for-accurate-heat-press-transfers","title":"QUKLOGEN Sublimation Shirt Tool Kit — 12 Neck-Centering Rulers, 3 Teflon Sheets \u0026 Gloves for Accurate Heat-Press Transfers","description":"\u003cp\u003e\u003cstrong\u003eQUKLOGEN Sublimation Shirts Tool Kits is a complete heat-press accessory set with 12 neck-centering rulers, reusable teflon sheets, heat-resistant gloves, tapes, and positioning tools to make accurate T‑shirt and apparel transfers fast and repeatable.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you make custom apparel by sublimation, heat transfer, or screen printing, this kit bundles the measuring, protecting, and positioning tools you use most. Everything is curated to help you align designs on round and V‑necks, protect your heat‑press platen, and keep transfers from shifting — whether you’re producing a single custom tee at home or running a small print shop.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the kit help me align designs on different necklines?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes 12 PVC rulers sized for both round and V neck T‑shirts so you can centre artwork quickly and consistently across sizes. Clear markings simplify repeatable placement for multiple garments without guesswork.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12 small, lightweight PVC rulers with visible numbers and marks\u003c\/li\u003e\n  \u003cli\u003eRulers sized for a range of T‑shirt neck dimensions\u003c\/li\u003e\n  \u003cli\u003eUse rulers to mark centre and height before pressing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protects my heat press and transfers during pressing?\u003c\/h3\u003e\n\u003cp\u003eHigh‑temperature teflon sheets and heat‑resistant gloves included in the kit reduce sticking, scorch marks, and accidental burns. The teflon is waterproof, tear‑resistant, and rated for high temperatures so it can be reused many times.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree 12 x 16 in teflon sheets: nonstick, waterproof, and tear resistant\u003c\/li\u003e\n  \u003cli\u003eHeat‑resistant gloves with silicone bumps for better grip\u003c\/li\u003e\n  \u003cli\u003eTape and positioning pins to secure transfers and avoid shifting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat small tools are included to make setup faster and neater?\u003c\/h3\u003e\n\u003cp\u003eBeyond rulers and teflon sheets, the kit supplies scrapers, a film knife, pencils, a sharpener, and positioning pins to trim, mark, and secure designs. These finishing tools speed up prep and produce cleaner, repeatable results when transferring images to fabric.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePink fleece scraper plus two small scrapers for smoothing and finishing\u003c\/li\u003e\n  \u003cli\u003eFilm cutting knife and mini pruning tool for precise trimming\u003c\/li\u003e\n  \u003cli\u003eThree sublimation pencils, sharpener, tape measure, and 40 positioning pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this kit stand up to regular shop use?\u003c\/h3\u003e\n\u003cp\u003eComponents are built for reuse: durable PVC rulers and thick teflon sheets resist wear from repeated heat‑press cycles. The kit is sized for portability yet robust enough for small business production and frequent home crafting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReusable rulers and teflon sheets designed for many cycles\u003c\/li\u003e\n  \u003cli\u003eHeat‑resistant tape and protective gloves for repeated pressing\u003c\/li\u003e\n  \u003cli\u003eCompact, organized set suitable for mobile or small‑shop use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: QUKLOGEN Sublimation Shirts Tool Kits suits hobbyists who want neater, faster garment transfers and small businesses seeking consistent placement and protection during heat‑press work. If you regularly do sublimation, heat-transfer, or shirt printing and need reliable measuring, protection, and finishing tools in one compact kit, this set removes much of the manual guesswork and helps produce cleaner, repeatable results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the teflon sheets reusable and heat resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the teflon sheets are thick, tear‑resistant, nonstick, and rated for repeated use at high heat up to typical heat‑press temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the rulers work for both round and V‑neck T‑shirts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the set includes 12 PVC rulers sized for centering designs on both round and V‑neck shirts across multiple garment sizes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QUKLOGEN","offers":[{"title":"Default Title","offer_id":55254291087697,"sku":"B0DYV8SKSS","price":49.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/quklogen-front-packaging-tool-kit.jpg?v=1791672563"},{"product_id":"vchomy-heat-press-platen-wrap-cover-for-15x15-inch-heat-presses-2-pack-teflon-non-stick-heat-resistant-up-to-500-f","title":"VCHOMY Heat Press Platen Wrap Cover for 15x15 inch Heat Presses — 2-Pack Teflon Non-Stick, Heat-Resistant Up to 260 °C","description":"\u003cp\u003e\u003cstrong\u003eVCHOMY Heat Press Platen Wrap Cover is a two-piece, non-stick Teflon-coated protector that shields your 15x15 inch heat press platens from inks, adhesives, and residue while withstanding temperatures up to 500°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you use a sublimation or HTV heat press regularly, keeping the platen clean and undamaged is essential for consistent transfers and long equipment life. The VCHOMY upgraded platen wrap set includes two covers sized and colour-coded for easy placement: a larger black-edged cover for the upper platen and a standard white-edged cover for the lower platen. Constructed from Teflon-coated fibreglass and edged with stretchy polyester elastic, these covers slip on in seconds and wipe clean for fast turnaround between jobs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the platen wrap protect my heat press from stains and residue?\u003c\/h3\u003e\n\u003cp\u003eThe Teflon-coated fibreglass surface creates a non-stick barrier between inks, adhesives, and the metal platen. That minimizes polymerized residue and dye stains from direct contact, keeping the platen smooth and easier to maintain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-stick Teflon finish repels inks and adhesive buildup\u003c\/li\u003e\n  \u003cli\u003eHeat-resistant up to 500°F so it tolerates common press temperatures\u003c\/li\u003e\n  \u003cli\u003eElastic edges hold the cover taut to prevent shifting during presses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these covers fit my 15x15 inch heat press easily?\u003c\/h3\u003e\n\u003cp\u003eYes — the set is designed for 15x15 inch platens with one slightly larger piece for the upper platen and a standard-size lower platen cover. The elastic hem stretches to accommodate variations in platen thickness and secures the wrap for stable pressing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-piece set: black-edged larger cover for upper platen, white-edged standard for lower platen\u003c\/li\u003e\n  \u003cli\u003eStretch polyester edges for flexible fitting on most 15x15 platens\u003c\/li\u003e\n  \u003cli\u003eQuick to install or remove for rapid job changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I clean and maintain the Teflon platen covers?\u003c\/h3\u003e\n\u003cp\u003eCleaning is straightforward: allow the platen to cool, then wipe the cover with a damp cloth to remove surface residue. For stubborn deposits, gentle scrubbing with mild detergent and a soft brush is usually enough; avoid abrasive cleaners or sharp tools that could damage the coating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWipe with a damp cloth after cooling to remove ink or adhesive traces\u003c\/li\u003e\n  \u003cli\u003eUse mild soap and soft brush for heavier residue—no abrasives\u003c\/li\u003e\n  \u003cli\u003eInspect elastic edges occasionally and replace covers if frayed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these covers under frequent use?\u003c\/h3\u003e\n\u003cp\u003eThe fibreglass core and Teflon coating are built to resist high heat and repeated use, making them a practical accessory for hobbyists and small businesses. While durable, regular inspection for wear and replacement when fraying appears will keep press results consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTeflon-coated fibreglass handles common HTV and sublimation temperatures\u003c\/li\u003e\n  \u003cli\u003eDesigned to reduce staining and extend platen life with normal use\u003c\/li\u003e\n  \u003cli\u003eReplace when coating shows significant wear or elastic loses stretch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The VCHOMY Heat Press Platen Wrap Cover set is intended for crafters, small print shops, and home-based businesses using 15x15 inch heat presses. It fits users who need a fast, non-stick protective layer to reduce clean-up time, protect platen surfaces from inks and adhesives, and maintain consistent transfer quality without replacing or refinishing the platen frequently.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these covers handle 400–500°F press temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Teflon-coated fibreglass is rated up to 500°F and suitable for common sublimation and HTV temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the covers machine-washable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Wipe clean with a damp cloth or mild soap and soft brush; avoid machine washing to protect the Teflon coating.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VCHOMY","offers":[{"title":"Default Title","offer_id":55254302753105,"sku":"B0DQ7HYRRR","price":32.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/vchomy-front-packaging-15x15-platen-wraps.jpg?v=1791672935"},{"product_id":"selizo-teflon-sheets-for-heat-press-12x16-20-pack-ptfe-coated-nonstick-mats-heat-resistant-to-600-f","title":"selizo Teflon Sheets for Heat Press 12x16 (20-Pack) PTFE-Coated Nonstick Mats, Heat Resistant to 316 °C","description":"\u003cp\u003e\u003cstrong\u003eSelizo 20 Pack Teflon Sheets are reusable 12\" x 16\" PTFE-coated fibreglass mats that protect garments, vinyl, and heat press surfaces up to 600°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you use a heat press, Cricut iron, or do sublimation on tumblers and fabrics, these teflon sheets act as a barrier between your project and the heating element. Made from glass fibre with a PTFE coating, each brown 12\" x 16\" sheet resists high temperatures, is nonstick, and wipes clean easily. This pack of 20 gives you spares to cut to size, dedicate to specific jobs, or swap out when one gets heavily soiled.\u003c\/p\u003e\n\n\u003ch3\u003eHow do Selizo teflon sheets protect my HTV and heat press?\u003c\/h3\u003e\n\n\u003cp\u003eThe PTFE surface prevents adhesive, ink, or melted vinyl from bonding to your press or iron while providing an even heat distribution. That reduces scorching, sticky residue, and the need to replace or deeply clean heat press platens. They act as a sacrificial layer so you can press repeatedly without worrying about direct contact between your design and the heating element.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePTFE-coated fibreglass prevents sticking and seals off adhesives.\u003c\/li\u003e\n  \u003cli\u003eHeat resistance up to 600°F for most transfer and sublimation work.\u003c\/li\u003e\n  \u003cli\u003eReusable many times — use both sides to extend lifespan.\u003c\/li\u003e\n  \u003cli\u003e12\" x 16\" size fits most small presses or can be trimmed to fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use these sheets for sublimation on mugs, tumblers, or baking tasks?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the Selizo sheets are versatile enough for many heat-related crafts. They are commonly used to protect transfers on flat presses and to shield surfaces during tumbler or mug sublimation when wrapped carefully. The nonstick and waterproof finish makes cleanup simple after ink or food contact, but avoid direct flame exposure and follow your press or oven manufacturer's guidelines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWrap or cover items for mug\/tumbler sublimation to prevent scorching.\u003c\/li\u003e\n  \u003cli\u003eServe as a nonstick liner for baking sheets when needed.\u003c\/li\u003e\n  \u003cli\u003eWipe clean with a damp cloth after cooling to remove residue.\u003c\/li\u003e\n  \u003cli\u003eCut-to-fit sheets make them adaptable to many forms and sizes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are the sheets and how should I maintain them?\u003c\/h3\u003e\n\n\u003cp\u003eConstructed from fibreglass with a PTFE coating, these sheets are designed for repeated use and resist tearing under normal craft conditions. They can tolerate temperatures commonly used in HTV and sublimation workflows, and if kept free of sharp objects and abrasive cleaners, they'll last many cycles. Clean gently once cooled to preserve the nonstick layer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for temperatures up to 600°F; avoid direct flame contact.\u003c\/li\u003e\n  \u003cli\u003eReusable on both sides to extend service life.\u003c\/li\u003e\n  \u003cli\u003eClean with a damp cloth after cooling; avoid harsh abrasives.\u003c\/li\u003e\n  \u003cli\u003eTrim with scissors to tailor to specific press sizes or projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size and quantity will I receive and can they be customised?\u003c\/h3\u003e\n\n\u003cp\u003eThis listing includes twenty 12\" x 16\" brown PTFE teflon sheets, which gives you extra pieces for different materials, colours, or dedicated tasks. The sheets are thin (about 0.13 mm) and easy to cut with household scissors, so you can make custom covers, small squares for vinyl work, or long strips for sleeves and moulds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20 sheets per pack — useful for rotation or specialized use.\u003c\/li\u003e\n  \u003cli\u003eEach sheet measures 12\" x 16\", thickness approximately 0.13 mm.\u003c\/li\u003e\n  \u003cli\u003eCut to any shape with scissors to fit your tool or project.\u003c\/li\u003e\n  \u003cli\u003eBrown colour hides light staining and looks tidy on workbenches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: crafters, small-batch sellers, hobbyists, and kitchen hobby bakers who need a reliable, reusable barrier for heat transfers and protective liners. If you press HTV, do small-scale sublimation, or want a nonstick sheet for heat-related baking and crafting tasks, Selizo’s 20-pack gives you plenty of coverage and spares to keep projects running smoothly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are Selizo teflon sheets reusable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The PTFE-coated fibreglass sheets are reusable many times if cleaned gently and not exposed to direct flame or sharp abrasion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I cut these sheets to fit my heat press?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Absolutely. Each 12\" x 16\" sheet can be trimmed with scissors to match your press or project dimensions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"selizo","offers":[{"title":"Default Title","offer_id":55254406824273,"sku":"B0C6CYW9MR","price":32.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/selizo-front-packaging-teflon-sheets.jpg?v=1791675098"},{"product_id":"aouxseem-sublimation-car-window-blanks-24-pack-4-8in-pvc-discs-with-suction-cups-double-sided-white-backed-for-vivid-heat-trans","title":"AOUXSEEM Sublimation Car Window Blanks 24-Pack 4.8in PVC Discs with Suction Cups — Double-Sided, White-Backed for Vivid Heat-Trans","description":"\u003cstrong\u003eAOUXSEEM 24-set suction-cup car window blanks are ready-to-sublimate PVC discs that let you create custom, removable warning and notice signs for vehicle windows.\u003c\/strong\u003e\n\n\u003cp\u003eThese 4.8 x 4.8 inch PVC blanks come double-sided and white-backed for crisp heat-transfer results, with a suction-cup attachment for simple placement on glass. Designed for dye-sublimation, they accept detailed transfers and vivid colour reproduction while remaining waterproof and writable after printing. The kit includes 24 identical blanks ideal for small fleets, event vehicles, or craft sellers who want consistent, reproducible signage.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I transfer my design onto these car window blanks?\u003c\/h3\u003e\n\u003cp\u003ePrint your artwork in mirror mode on sublimation paper, align it with the blank, then use a heat press at the recommended temperature and time. After cooling, the image is fused into the PVC surface for a sharp, durable finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrint artwork in mirror mode on sublimation paper.\u003c\/li\u003e\n  \u003cli\u003ePlace print against the white PVC face; both sides of the blank accept transfers.\u003c\/li\u003e\n  \u003cli\u003eUse a heat press at 180°C (356°F) for roughly 40 seconds.\u003c\/li\u003e\n  \u003cli\u003eRemove paper after pressing and attach the suction cup to glass.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the print stay bright and withstand outdoor conditions?\u003c\/h3\u003e\n\u003cp\u003eThe PVC surface is formulated to hold dye-sublimation ink for vivid detail and strong colour saturation. While the blanks are water-resistant and designed for outdoor window use, proper application and handling will extend their visual life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWhite PVC ensures accurate colour reproduction and contrast.\u003c\/li\u003e\n  \u003cli\u003eWater-resistant finish tolerates light moisture and condensation.\u003c\/li\u003e\n  \u003cli\u003eHigh-resolution detail capture preserves small text and icons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I write on these blanks or reuse them with different designs?\u003c\/h3\u003e\n\u003cp\u003eYes—after printing you can add notes or dates with a marker. The suction-cup mount allows easy removal and repositioning, but the sublimation image itself is permanent on the PVC surface; to change graphics you would need a new blank.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWritable surface accepts marker pens for short notes.\u003c\/li\u003e\n  \u003cli\u003eRemovable suction cup allows temporary placement and repositioning.\u003c\/li\u003e\n  \u003cli\u003eSingle-use for sublimation: replace blank to change printed design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat equipment and materials do I need to complete a transfer?\u003c\/h3\u003e\n\u003cp\u003eYou need a dye-sublimation printer and compatible inks, sublimation paper, a heat press that reaches 180°C, and basic heatproof accessories for safe handling. The kit supplies the printable PVC blanks with attached suction cups but not printing supplies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDye-sublimation printer and sublimation inks\/paper.\u003c\/li\u003e\n  \u003cli\u003eHeat press capable of 180°C (356°F) and firm pressure.\u003c\/li\u003e\n  \u003cli\u003eHeat-resistant tape or protective sheet to hold prints in place.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This 24-set pack from AOUXSEEM fits craft businesses, community groups, schools, valet services, and event organisers who need consistent, removable window signage in bulk. It’s also suited to hobbyists and sellers of custom automotive decorations who want a reliable sublimation-ready surface that delivers sharp colour and a simple suction-cup mounting option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperature and time are recommended for sublimation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a heat press at 180°C (356°F) for about 40 seconds for best transfer results.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the printed signs removable and reusable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The suction cup makes the sign removable and repositionable, but the sublimation image is permanent on the blank.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AOUXSEEM","offers":[{"title":"Default Title","offer_id":55254443229521,"sku":"B0FN4J9NRN","price":33.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/aouxseem-front-packaging_a6183072-bfa0-497e-b0d9-431e7fc97ca8.jpg?v=1791676133"},{"product_id":"laihiulaan-sublimation-earring-blanks-kit-150-pc-large-mdf-teardrop-blanks-50-pcs-2-1-x-1-4-with-hooks-jump-rings-double","title":"LaiHiulaan Sublimation Earring Blanks Kit — 150-Pc Large MDF Teardrop Blanks (50 pcs 2.1\" x 1.4\") with Hooks \u0026 Jump Rings, Double-","description":"\u003cp\u003e\u003cstrong\u003eLaiHiulaan 150-piece sublimation earring kit provides large, double-sided MDF teardrop blanks plus hooks and jump rings ready for heat-transfer customization.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis set is designed for makers, small jewellery businesses, and craft-gift makers who want a reliable, large-format blank that accepts sublimation ink cleanly. Each of the 50 double-sided teardrop blanks measures 2.1\" x 1.4\" with a 1\/8\" thickness and comes with protective film on both sides. The kit also includes 50 hooks and 50 jump rings so you can finish pieces right away or add your own hardware for a custom look.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these blanks perform with sublimation presses?\u003c\/h3\u003e\n\u003cp\u003eThe blanks use high-density MDF with a sublimation-ready coating designed to take ink evenly and produce bright, crisp transfers. Because the blanks have protection film on both sides, removing the films before pressing prevents interference with ink transfer and keeps edges clean.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended press temp: 355–375°F (180–190°C).\u003c\/li\u003e\n  \u003cli\u003eSuggested press time: 60–70 seconds for best colour penetration.\u003c\/li\u003e\n  \u003cli\u003eDouble-sided protective film — peel both sides prior to printing.\u003c\/li\u003e\n  \u003cli\u003e1\/8\" thickness supports durability while remaining lightweight for earrings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and quantities are included in the LaiHiulaan 150-piece kit?\u003c\/h3\u003e\n\u003cp\u003eThe bundle provides enough components to produce 50 finished earring pairs plus extras for experimentation. Size and count are optimised for small-batch makers or gift production without frequent restocking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50 MDF teardrop blanks, 2.1\" x 1.4\" each, double-sided.\u003c\/li\u003e\n  \u003cli\u003e50 earring hooks for quick assembly.\u003c\/li\u003e\n  \u003cli\u003e50 jump rings for attaching hooks or adding decorative elements.\u003c\/li\u003e\n  \u003cli\u003eTotal pieces in kit: 150 (blanks + hooks + jump rings).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich design types and finishes work best on these teardrops?\u003c\/h3\u003e\n\u003cp\u003eBecause the blanks are coated for sublimation, full-colour photographic prints, bold graphics, and gradient artwork all translate clearly. The teardrop shape gives a generous printable area that suits portrait motifs, patterns, and brand logos.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePhotographs and high-resolution illustrations produce crisp detail.\u003c\/li\u003e\n  \u003cli\u003eBold colours and gradients remain vivid after pressing.\u003c\/li\u003e\n  \u003cli\u003eEdge-to-edge transfers are possible with careful masking and placement.\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard sublimation inks and transfers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The LaiHiulaan 150-piece sublimation earring blank kit is ideal for craft entrepreneurs, Etsy sellers, craft fair vendors, classroom or club projects, and hobbyists who want a large-format blank that prints reliably. If you need a starter pack with matching hardware included and a surface that accepts vivid heat-transferred prints, this kit gives volume and quality without complex setup. For best results, remove the protective films, follow the recommended press settings, and test a sample before full production.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to remove protective film before sublimation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Peel off the protective film on both sides before pressing to ensure clean, even ink transfer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the blanks ready to wear after pressing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. After sublimation and assembly using the included hooks and jump rings, earrings are ready to wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LaiHiulaan","offers":[{"title":"Default Title","offer_id":55254498509137,"sku":"B0CXJFYR41","price":33.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/laihiulaan-front-view-large-teardrop-blank.jpg?v=1791677982"},{"product_id":"hysagtek-silicone-sublimation-wraps-2-pack-for-15oz-20oz-skinny-tumblers-seamless-heat-resistant-482-f","title":"Hysagtek Silicone Sublimation Wraps 2-Pack for 444 ml \u0026 591 ml Skinny Tumblers — Seamless, Heat-Resistant (250 °C)","description":"\u003cp\u003e\u003cstrong\u003eHysagtek seamless silicone sublimation wraps are a two-piece kit that snugly holds 15oz and 20oz skinny tumblers for even, no-ghosting heat transfers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re starting out with personalised drinkware or scaling a small sublimation business, these silicone sleeves simplify the pressing step. The kit includes two silicone wraps sized to fit 15oz and 20oz (8.1\" tall) straight skinny tumblers, heat-resistant gloves, and transfer tape so you can apply designs without shrink film or heat guns. Built to withstand oven and mug press temperatures up to 482°F (250°C), the wraps press evenly around the cup for crisp, continuous results.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these wraps prevent ghosting and seams during sublimation?\u003c\/h3\u003e\n\u003cp\u003eThe wrap’s seamless, tight-fitting design keeps sublimation paper pressed flat against the tumbler surface, reducing gaps where ghosting and misalignment occur. Instead of relying on shrink film, you simply tape the seam of your paper, slide on the silicone sleeve, and heat. The firm but flexible silicone maintains constant pressure around the cup for consistent dye transfer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSeamless tube shape eliminates edge gaps and uneven contact.\u003c\/li\u003e\n  \u003cli\u003eClose fit for 15oz and 20oz straight skinny tumblers (8.1\" tall).\u003c\/li\u003e\n  \u003cli\u003eApplies uniform pressure to reduce ghosting and double-imprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat equipment and temperatures are these silicone wraps compatible with?\u003c\/h3\u003e\n\u003cp\u003eHysagtek silicone wraps are made for use with mug presses, oven setups, and convection heating where tumblers are sublimated. They tolerate temperatures up to 482°F (250°C), so they work with most common sublimation settings for metal and coated tumblers. The kit includes transfer tape and heat-resistant gloves to handle hot cups safely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with mug press machines and ovens\/convection setups.\u003c\/li\u003e\n  \u003cli\u003eMaximum temperature resistance: 482°F \/ 250°C.\u003c\/li\u003e\n  \u003cli\u003eIncludes heat-resistant gloves for safe removal after pressing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the process for beginners and small-batch production?\u003c\/h3\u003e\n\u003cp\u003eThe process is straightforward: wrap your sublimation paper neatly around the tumbler, tape the seam, slide on the silicone sleeve, and place the cup in your heat source. No shrink film, hair dryers, or complex clamping systems are required. The silicone’s flexibility makes it quick to use for small batches or hobby projects while remaining durable for repeated commercial use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple three-step workflow: tape, sleeve, heat.\u003c\/li\u003e\n  \u003cli\u003eReuses the same sleeves and gloves for many projects.\u003c\/li\u003e\n  \u003cli\u003eIdeal for short runs and hobbyists learning sublimation technique.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat care and maintenance do the silicone wraps need?\u003c\/h3\u003e\n\u003cp\u003eAfter cooling, wipe the sleeves with a damp cloth to remove ink residue and keep them dry before storage. Avoid sharp objects or abrasive cleaners that could damage the silicone surface. Proper care preserves the wrap’s tight fit and repeated heat-resistance for extended use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWipe clean with a soft, damp cloth after use.\u003c\/li\u003e\n  \u003cli\u003eDo not cut or use abrasive cleaners on the silicone.\u003c\/li\u003e\n  \u003cli\u003eStore flat in a cool, dry place to maintain shape and fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hysagtek 2-pack sublimation silicone wraps are suited to craft hobbyists, custom gift makers, and small-business owners producing personalised tumblers. If you often sublimate 15oz or 20oz skinny tumblers and want a faster, more reliable way to press designs without shrink film or special tools, this kit gives consistent contact, thermal resistance, and reusable tools to streamline production.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these wraps fit tapered or curved tumblers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They are designed for straight skinny tumblers (15oz and 20oz, 8.1\" tall) and work best on non-tapered surfaces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these in both an oven and a mug press?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The silicone sleeves tolerate up to 482°F (250°C) and are compatible with ovens and most mug press machines.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hysagtek","offers":[{"title":"Default Title","offer_id":55254518169937,"sku":"B09TJBZ7MK","price":35.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/hysagtek-front-packaging-wraps-gloves.jpg?v=1791678762"},{"product_id":"eorbow-car-coaster-packaging-200-pcs-white-display-cards-self-seal-hanging-bags-fits-2-coasters","title":"Eorbow Car Coaster Packaging 200 PCS — White Display Cards \u0026 Self-Seal Hanging Bags, Fits 2 Coasters","description":"\u003cp\u003e\u003cstrong\u003eEorbow 200 PCS Car Coaster Packaging is a ready-to-use bundle of thick display cards and clear self-seal bags designed to present, protect, and sell two sublimation car coasters per pack.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you make or sell sublimated car coasters, presentation matters. This kit bundles 200 sturdy paper display cards sized to hold two coasters each with 200 transparent, self-sealing opp bags that hang on pegs or display hooks. The components are sized for standard car cupholder blanks and designed to speed up packaging while giving finished pieces a neat retail-ready look.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these display cards and bags streamline my packing process?\u003c\/h3\u003e\n\u003cp\u003eThe cards and bags are pre-sized and paired so you can package two coasters at once, shaving time off repetitive tasks. The self-seal bags eliminate the need for tape or heat-sealing, and the drilled hanging hole makes retail display immediate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e200 matching cards and bags ready for same-day packing\u003c\/li\u003e\n  \u003cli\u003eSelf-adhesive bag closure — no extra consumables required\u003c\/li\u003e\n  \u003cli\u003eTop hole for pegboard or gridwall merchandising\u003c\/li\u003e\n  \u003cli\u003eCards designed to fit two standard car coasters for quick assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the display cards durable enough for shipping and retail?\u003c\/h3\u003e\n\u003cp\u003eThe cards are made from thicker paper stock than typical backing cards so they resist bending and keep coaster artwork flat. They provide a stable backing inside the clear bag to protect designs in transit and present a clean, professional face on the shelf.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavyweight paper that holds shape during handling\u003c\/li\u003e\n  \u003cli\u003ePrinted sweet messages on top for a gift-friendly appearance\u003c\/li\u003e\n  \u003cli\u003eSuitable for mailers or countertop display without extra stiffeners\u003c\/li\u003e\n  \u003cli\u003eCards help prevent rubbing and creases to sublimated surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my sublimation coaster blanks and heat-press workflow?\u003c\/h3\u003e\n\u003cp\u003eThe white cards measure approximately 7\" x 3\", and the clear bags are about 9.5\" x 3.5\", providing enough room for two average-sized car coasters. They integrate smoothly into a small-press production line and are compatible with typical heat-press accessory workflows.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCard dimensions crafted for most car cupholder blanks\u003c\/li\u003e\n  \u003cli\u003eBag size accommodates two coasters and card backing comfortably\u003c\/li\u003e\n  \u003cli\u003eQuick insertion after pressing and trimming — ideal for batch work\u003c\/li\u003e\n  \u003cli\u003eTransparent bag lets designs show while remaining protected\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these packaging components improve my product presentation?\u003c\/h3\u003e\n\u003cp\u003eNeat presentation increases perceived value; these display cards add a consistent branded look and the clear opp bags let buyers view the art without opening. The included friendly messages also make items more giftable right from the shelf.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional, uniform look across inventory\u003c\/li\u003e\n  \u003cli\u003eVisibility of the full design through transparent bagging\u003c\/li\u003e\n  \u003cli\u003eGift-ready appearance with no extra wrapping needed\u003c\/li\u003e\n  \u003cli\u003eSimple to add labels, price tags, or custom branding to cards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Makers, small shops, and online sellers who produce sublimated car coasters and want an affordable, time-saving packaging solution. The Eorbow 200-piece set is aimed at artists and entrepreneurs preparing products for retail, craft fairs, or e-commerce who need consistent presentation, protection, and quick hanging\/display capability without investing in custom printed packaging. (No coasters included; cards and bags only.)\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the bags come pre-cut with a hanging hole?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, each bag has a drilled hanging hole so packaged coasters can be displayed on peg hooks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these cards hold two car coasters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the white backing card measures about 7\" x 3\" and fits two standard car coasters.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Eorbow","offers":[{"title":"Default Title","offer_id":55254539370833,"sku":"B0DP8FLG9D","price":50.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/eorbow-front-packaging-display.jpg?v=1791679435"},{"product_id":"kiseer-silicone-mug-wraps-3-pack-11oz-12oz-15oz-sublimation-clamps-with-metal-buckle-for-heat-presses","title":"KISEER Silicone Mug Wraps 3-Pack — 325 ml, 355 ml \u0026 444 ml Sublimation Clamps with Metal Buckle for Heat Presses","description":"\u003cp\u003e\u003cstrong\u003eKISEER 3-pack 3D sublimation silicone mug wraps are reusable clamps that secure 11oz, 12oz and 15oz mugs during heat-press transfer to keep designs aligned and crisp.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you print custom mugs, keeping the sublimation transfer perfectly positioned is essential. These KISEER silicone mug cup wraps combine flexible, heat-resistant silicone with a metal buckle to hold the transfer paper firmly against the mug body while it goes through a heat press or oven. The set includes three different-size wraps so you can handle common mug sizes without jury-rigging or tape.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these wraps improve my sublimation prints?\u003c\/h3\u003e\n\u003cp\u003eBy hugging the mug surface and locking in place with a metal snap, the wraps reduce movement and prevent the transfer sheet from shifting under heat and pressure. That leads to sharper graphics, fewer misprints and less wasted material.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents slippage during pressing for more accurate transfers\u003c\/li\u003e\n  \u003cli\u003eEven pressure distribution helps reduce ghosting or smudging\u003c\/li\u003e\n  \u003cli\u003eCompatible with ceramic and coated metal mugs used in sublimation\u003c\/li\u003e\n  \u003cli\u003eReusable material reduces need for single-use tape or complicated fixtures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the KISEER mug clamps easy to use on a production line?\u003c\/h3\u003e\n\u003cp\u003eYes — each wrap installs in seconds: wrap around the mug, close the silicon over the transfer area and fasten the metal buckle. The straightforward closure saves time when processing multiple mugs and keeps workflow consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick wrap-and-snap application for rapid setup\u003c\/li\u003e\n  \u003cli\u003eDurable materials built for repeated use in small-batch production\u003c\/li\u003e\n  \u003cli\u003eNo adhesives or extra tools required for assembly\u003c\/li\u003e\n  \u003cli\u003eFlat profile simplifies stacking and storage between jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes are included and which mugs do they fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains three sizes tailored for common mug volumes: an 11oz clamp, a 12oz clamp and a 15oz clamp. Each piece is shaped to match typical mug heights and circumferences used in sublimation, so you can choose the closest fit for your mug to obtain consistent contact across the design area.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e11oz wrap: approximately 9.4 inches long by 4.3 inches high — fits standard 11oz mugs\u003c\/li\u003e\n  \u003cli\u003e12oz wrap: sized for typical 12oz cups used in heat transfer processes\u003c\/li\u003e\n  \u003cli\u003e15oz wrap: approximately 9.6 inches long by 4.9 inches high — fits taller 15oz mugs\u003c\/li\u003e\n  \u003cli\u003eOne-of-each in the pack covers most small business mug sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and heat-resistant are these silicone wraps?\u003c\/h3\u003e\n\u003cp\u003eConstructed from high-quality silicone and a metal buckle, the clamps withstand repeated exposure to heat presses and high temperatures common in sublimation work. They are reusable, easy to clean and designed for a long service life when used per guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-resistant silicone tolerates typical sublimation temperatures\u003c\/li\u003e\n  \u003cli\u003eMetal buckle provides secure closure without stretching the silicone\u003c\/li\u003e\n  \u003cli\u003eWipe-clean surface simplifies maintenance between runs\u003c\/li\u003e\n  \u003cli\u003eAvoid pulling or tearing to preserve the material integrity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The KISEER 3-pack is ideal for small business owners, hobbyists and print shops that produce personalised mugs and want a repeatable, low-cost way to secure transfers. If you need faster setup, less wasted material and consistent print alignment across 11oz, 12oz and 15oz mugs, this set offers a practical, reusable solution. Follow the care note to avoid tearing and the clamps will give reliable service for many presses.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these wraps on coated and ceramic sublimation mugs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The silicone wraps work with ceramic and coated sublimation mugs to hold transfer paper in place during heat pressing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I clean and care for the KISEER silicone wraps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Wipe them with a damp cloth and mild soap. Avoid sharp pulls or tearing and store flat to maintain shape.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KISEER","offers":[{"title":"Default Title","offer_id":55254542254417,"sku":"B094CTXLTV","price":33.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/kiseer-front-packaging-3-wraps.jpg?v=1791679559"},{"product_id":"hotop-sublimation-sock-jigs-4-piece-metal-inserts-2-sizes-25-4-9-53-45-8-5-cm-aluminum-for-heat-press-stability","title":"Hotop Sublimation Sock Jigs 4-Piece Metal Inserts — 2 Sizes (25.4×9.53 \u0026 45×8.5 cm), Aluminium for Heat-Press Stability","description":"\u003cstrong\u003eHotop 4 Pieces Sublimation Socks Jigs are aluminium metal inserts that shape and stabilise socks for accurate heat-transfer and sublimation work.\u003c\/strong\u003e\n\n\u003cp\u003eThese four metal sock jigs from Hotop let you mount, stretch, and hold crew and ankle socks during heat-press or sublimation transfers so prints lay flat and align correctly. Made of lightweight aluminium alloy and supplied in two practical sizes, the set replaces flimsy cardboard or wooden forms and can be rehung for storage. They’re intended to speed production, reduce misprints, and extend the life of your jigs through repeated use.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these jigs improve my sock sublimation results?\u003c\/h3\u003e\n\u003cp\u003eUsing a rigid metal form prevents wrinkles, uneven surfaces, and shifting that cause blurred or misaligned prints. With socks stretched over the jig, heat and pressure distribute more consistently across the fabric, which helps transfers come out sharper and more uniform.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHolds socks taut to minimize creases during pressing.\u003c\/li\u003e\n  \u003cli\u003ePrevents fabric bunching at seams and toes.\u003c\/li\u003e\n  \u003cli\u003eConsistent contact improves ink diffusion and clarity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes are included and which sock types fit each size?\u003c\/h3\u003e\n\u003cp\u003eThe package contains four metal straight jigs in two lengths so you can handle different sock heights and widths. Two jigs measure 25.4 x 9.53 cm for shorter socks or youth styles, while two measure 45 x 8.5 cm for crew socks or larger adult sizes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e25.4 x 9.53 cm: ideal for ankle and kids’ socks.\u003c\/li\u003e\n  \u003cli\u003e45 x 8.5 cm: fits crew socks and adult calf lengths.\u003c\/li\u003e\n  \u003cli\u003eTwo of each size allow batch operations or backup while one set cools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy are they to use and store in a small workshop?\u003c\/h3\u003e\n\u003cp\u003eThe jigs are simple to operate—slide a sock onto the form, align your transfer paper, and run through your heat press as usual. Each jig includes a round hanging hole so you can store them off work surfaces, saving space and keeping shapes intact between uses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlip-on design speeds setup for single items or runs.\u003c\/li\u003e\n  \u003cli\u003eTop hole for wall hanging or pegboard storage.\u003c\/li\u003e\n  \u003cli\u003eLightweight aluminium is portable for mobile setups or events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these jigs durable and compatible with other heat-transfer projects?\u003c\/h3\u003e\n\u003cp\u003eConstructed from an aluminium alloy, these jigs resist warping, rust, and breakage better than disposable jigs. While optimised for socks, they can also serve as supporting tools when pressing other small fabric or curved items, making them versatile workshop additions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminium alloy construction for long service life.\u003c\/li\u003e\n  \u003cli\u003eReusable across many heat-press cycles without deforming.\u003c\/li\u003e\n  \u003cli\u003eCan assist with small transfers beyond socks when needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Small-business crafters, print shop technicians, and hobbyists who perform sublimation or heat-transfer on socks will find this Hotop set useful. It’s designed for people who need consistent, repeatable results and want a durable, space-saving jig solution for everyday production or weekend projects.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these jigs fit all sock sizes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit most ankle and crew socks; the set includes two sizes (25.4×9.53 cm and 45×8.5 cm) to cover common youth and adult styles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these jigs with any heat press?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they’re compatible with standard flat and sock heat-press setups; ensure the jig size matches your press area.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hotop","offers":[{"title":"Default Title","offer_id":55254585672017,"sku":"B097BQC1SR","price":33.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/hotop-front-packaging-metal-socks-jigs.jpg?v=1791681195"},{"product_id":"shinfare-heat-press-pillows-shirt-rulers-kit-9-piece-teflon-coated-pressing-pillows-5x5-10x10-12x12-5x15-for-even-transfers","title":"SHINFARE Heat Press Pillows \u0026 Shirt Rulers Kit — 9-Piece Teflon-Coated Pressing Pillows (5x5,10x10,12x12,5x15) for Even Transfers","description":"\u003cp\u003e\u003cstrong\u003eSHINFARE Heat Press Pillows and Pads Kit is a 9-piece set of Teflon-coated pressing pillows and precision shirt rulers designed to deliver even pressure and crisp transfers on garments with seams, zippers, and irregular surfaces.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit combines four heat-resistant pressing pillows and five laser-etched T-shirt rulers so you can align, press, and finish custom apparel with professional consistency. Each pillow has a fire-resistant foam core and a Teflon exterior to prevent sticking and moisture damage, while the clear rulers make centering graphics fast and repeatable. The set is built for frequent use in both small shops and home studios where unpredictable fabrics and tricky seams can ruin a transfer.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these pressing pillows improve transfer quality?\u003c\/h3\u003e\n\u003cp\u003ePressing pillows compress under heat to create a uniform surface that eliminates hot spots and ghosting along seams, zippers, and pocket areas. The foam core flexes to fill gaps and support the garment, producing an even bond between transfer and fabric.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced foam yields consistent pressure across odd shapes.\u003c\/li\u003e\n  \u003cli\u003eTeflon-coated surfaces prevent tack and scorching.\u003c\/li\u003e\n  \u003cli\u003eSizes target sleeves, pockets, and full panels for cleaner prints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich sizes are included and when should I use each pillow?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains four distinct pillow sizes—5x5\", 10x10\", 12x12\", and 5x15\"—matched to common pressing needs so you can pick the right cushion for the job. Smaller pillows suit pocket logos and infant clothing, mid-size squares handle chest or small back designs, the large 12x12\" covers full-back prints, and the long 5x15\" is ideal for sleeves and pant legs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5x5\" — pocket logos, small patches, infant wear.\u003c\/li\u003e\n  \u003cli\u003e10x10\" — chest graphics, small craft projects.\u003c\/li\u003e\n  \u003cli\u003e12x12\" — full-back and larger panel transfers.\u003c\/li\u003e\n  \u003cli\u003e5x15\" — sleeves, pant seams, narrow elongated areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the shirt rulers speed up alignment and reduce mistakes?\u003c\/h3\u003e\n\u003cp\u003eFive laser-etched shirt rulers include collar notches and measurement grids so you can centre designs quickly without guessing. The clear material and permanent markings let multiple operators reproduce the same placement across batches with minimal rework.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMultiple ruler widths for different garment sizes and design types.\u003c\/li\u003e\n  \u003cli\u003eCollar notches and laser etching prevent fading of measurements.\u003c\/li\u003e\n  \u003cli\u003eFast, repeatable alignment reduces wasted transfers and time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these pillows durable enough for daily professional use?\u003c\/h3\u003e\n\u003cp\u003eYes—industrial-strength components like fire-resistant foam cores and Teflon-coated exteriors let these pillows survive routine, high-heat cycles. The construction resists moisture absorption and sticking, which prolongs usable life and keeps transfers clean under heavy workloads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFire-resistant cores reduce heat degradation risks.\u003c\/li\u003e\n  \u003cli\u003eTeflon coating resists adhesive buildup and moisture damage.\u003c\/li\u003e\n  \u003cli\u003eDesigned for frequent use in small shops and production runs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The SHINFARE 9-piece kit is made for hobbyists, custom apparel startups, and professional heat-press operators who need reliable, repeatable pressing tools. If you press hoodies, baby clothes, canvas bags, or garments with zippers and seams, these pillows and rulers reduce setup time and improve the visual quality of transfers. The range of sizes and durable materials also make the set a practical upgrade for any workstation that demands consistent placement and pressure without constant adjustments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these pillows be used with clamshell heat presses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Teflon-coated pillows and foam cores are compatible with clamshell and swing-away presses for even pressure on uneven surfaces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I clean Teflon-coated pillows?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Wipe with a soft cloth and mild detergent when cool; avoid abrasive pads. Do not submerge foam cores to prevent damage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SHINFARE","offers":[{"title":"Default Title","offer_id":55254589473105,"sku":"B0FYCJ5Q3X","price":35.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/shinfare-front-packaging-heat-press-pillows.jpg?v=1791681258"},{"product_id":"eorbow-heat-press-pillow-kit-8-piece-teflon-heat-transfer-pads-4-pillows-heat-resistant-tape-220-c","title":"Eorbow Heat Press Pillow Kit — 8-Piece Teflon Heat Transfer Pads, 4 Pillows \u0026 Heat-Resistant Tape (220°C)","description":"\u003cp\u003e\u003cstrong\u003eEorbow's 8-piece heat press pillow bundle is a complete Teflon-coated heat transfer kit that protects your press, smooths transfers across seams, and resists high temperatures up to 220°C (428°F).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you work with sublimation, vinyl, or screen printing, this kit groups the most useful accessories for small-run and hobby projects: four shaped heat-pressing pillows for curved or uneven areas, two Teflon transfer sheets for non-stick coverage, and two rolls of heat-resistant tape to secure materials. Built with a PTFE surface and flame-retardant foam core, each component is reusable and designed to reduce ghosting, wrinkling, and scorching during pressing.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the set improve transfers over zippers, seams, and buttons?\u003c\/h3\u003e\n\u003cp\u003eThe inflatable-style pressing pillows fill gaps and compress uneven areas so transfers remain flat and consistent. Their soft foam with a smooth Teflon outer layer prevents direct pressure points from distorting designs while concentrating heat where it’s needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour pillow sizes accommodate sleeves, cuffs, pant legs, and small bags.\u003c\/li\u003e\n  \u003cli\u003eTeflon surface keeps vinyl and sublimation inks from sticking or leaving residue.\u003c\/li\u003e\n  \u003cli\u003eCurved shapes let you press around zippers and buttons without damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat temperature and durability can I expect from the Teflon pads?\u003c\/h3\u003e\n\u003cp\u003eThe pads use PTFE-coated fabric bonded to fire-retardant foam to withstand temperatures up to 220°C (428°F). They’re built for repeated use, resist heat degradation, and maintain a smooth surface that supports crisp transfers over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for high-heat presses common in sublimation and vinyl work.\u003c\/li\u003e\n  \u003cli\u003eNon-stick coating minimizes ink transfer and adhesive buildup.\u003c\/li\u003e\n  \u003cli\u003eWipe-clean surface for fast maintenance between jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the included transfer sheets and tape make pressing easier?\u003c\/h3\u003e\n\u003cp\u003eThe two Teflon transfer sheets act as protective barriers between your heat platen and the garment, promoting even heat distribution and preventing shine or scorch marks. The heat-resistant tape secures multi-layer or oddly shaped projects so materials don’t shift during pressing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16 x 12\" transfer sheets cover medium-sized projects and platen areas.\u003c\/li\u003e\n  \u003cli\u003e33 m x 0.4\" heat tape holds materials firmly without leaving residue.\u003c\/li\u003e\n  \u003cli\u003eBoth components are reusable and compatible with common heat presses and irons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these tools work for both home hobbyists and small shops?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit balances user-friendly shapes and professional-grade materials to support varied workloads. It’s compact and affordable for home crafters, yet durable enough for light production environments that need consistent, repeatable results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour diverse pillow sizes meet most apparel and accessory needs.\u003c\/li\u003e\n  \u003cli\u003eDurable construction stands up to multiple press cycles.\u003c\/li\u003e\n  \u003cli\u003ePortable kit organizes essentials for craft fairs, pop-ups, or studio use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Eorbow 8-piece heat press pillow bundle is aimed at hobbyists, crafters, and small business owners working with sublimation, HTV, and screen-printed transfers who need a reliable way to press over seams, zippers, and uneven surfaces while protecting garments and their platen. If you want a reusable, non-stick solution that simplifies intricate presses and reduces finishing flaws, this kit supplies the core tools to get consistent results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these pillows handle commercial heat press temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the PTFE-coated pillows are rated up to 220°C (428°F), suitable for most sublimation and vinyl press temps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the Teflon sheets reusable and easy to clean?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the transfer sheets are wipe-clean, waterproof, and designed for repeated use with minimal upkeep.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Eorbow","offers":[{"title":"Default Title","offer_id":55254592520529,"sku":"B0FFT1SQ3P","price":51.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/eorbow-front-packaging-heat-press-pillow-bundle.jpg?v=1791681349"},{"product_id":"gekixutp-metal-sublimation-ornament-blanks-32-pack-2-75in-double-sided-aluminum-with-pre-drilled-holes","title":"GEKIXUTP Metal Sublimation Ornament Blanks 32-Pack 2.75in Double-Sided Aluminium with Pre-Drilled Holes","description":"\u003cp\u003e\u003cstrong\u003eGEKIXUTP 32 pcs Metal Sublimation Ornament Blanks are 2.75-inch double-sided aluminium discs made for heat-transfer personalisation and festive DIY decorations.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lightweight metal ornament blanks come in a set of 32 with pre-drilled holes and hanging cords, ready for sublimation printing or hand-decorating. Designed for hobbyists, small-business makers, and seasonal crafters, each aluminium disk accepts vivid transfers and resists everyday wear for long-lasting keepsakes. The package includes protective film on each piece—remove before applying heat—and the blanks are sized to work with most small heat presses and home sublimation setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow large are these ornaments and what material are they made of?\u003c\/h3\u003e\n\n\u003cp\u003eEach ornament is 2.75 inches (about 7 cm) in diameter and constructed from thin aluminium for a balance of durability and lightness. The metal’s smooth surface supports crisp sublimation transfers and prevents warping during heat application.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDiameter: 2.75 in \/ 7 cm\u003c\/li\u003e\n  \u003cli\u003eThickness: ~0.039 in \/ 1 mm\u003c\/li\u003e\n  \u003cli\u003eMaterial: aluminium plate with protective surface film\u003c\/li\u003e\n  \u003cli\u003eIncluded: 32 cords for hanging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I sublimate designs onto these blanks?\u003c\/h3\u003e\n\n\u003cp\u003eThese blanks work with standard sublimation workflows: apply your printed transfer, use a heat press at recommended settings, and peel away the paper to reveal the image. Exact time and temperature can vary by equipment and transfer paper—test one first to dial in settings.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSuggested heat: 190–200°C (374–392°F)\u003c\/li\u003e\n  \u003cli\u003eSuggested time: 50–60 seconds\u003c\/li\u003e\n  \u003cli\u003eRemove protective plastic film before transferring\u003c\/li\u003e\n  \u003cli\u003eTest one ornament first to confirm colour and adhesion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat creative uses and gift ideas work best with these blanks?\u003c\/h3\u003e\n\n\u003cp\u003eThese double-sided aluminium ornaments are ideal for making personalised holiday decorations, custom event favours, or themed keepsakes. They accept full-colour sublimation, hand-painting, vinyl, or ink-based embellishments, letting you customize for birthdays, weddings, memorials, or seasonal décor.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCustomised Christmas tree ornaments with names or photos\u003c\/li\u003e\n  \u003cli\u003eParty favours for weddings, showers, and corporate events\u003c\/li\u003e\n  \u003cli\u003eSmall promotional items for shops or craft markets\u003c\/li\u003e\n  \u003cli\u003eCar charms, room décor, and gift tags for special occasions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and easy-to-use are these ornament blanks?\u003c\/h3\u003e\n\n\u003cp\u003eMade from corrosion-resistant aluminium, these blanks are lightweight yet sturdy enough for repeated handling and seasonal storage. The smooth sublimation surface helps transfers adhere well and resist scratching or fading under normal indoor use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRust-resistant aluminium for long-term use\u003c\/li\u003e\n  \u003cli\u003eAnti-scratch surface helps preserve print quality\u003c\/li\u003e\n  \u003cli\u003eComes with pre-punched hole and hanging string for quick finishing\u003c\/li\u003e\n  \u003cli\u003eProtective film shields surface during shipping—remove before use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for?\u003c\/p\u003e\n\n\u003cp\u003eThis 32-piece set from GEKIXUTP is tailored for DIY crafters, small-business makers, and anyone who creates personalised gifts or seasonal décor. It’s especially useful for sellers of custom ornaments, craft class instructors, and families who want to produce bespoke holiday keepsakes at home or in a studio. If you need consistent-size, heat-compatible blanks that accept vivid images and finish neatly, this kit offers a cost-effective solution for bulk projects and craft events.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these ornaments come with hanging strings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—32 hanging cords are included, one for each 2.75-inch ornament, ready to use after sublimation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the recommended heat press settings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Try 190–200°C (374–392°F) for about 50–60 seconds, but test one blank to confirm results with your equipment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GEKIXUTP","offers":[{"title":"Default Title","offer_id":55254617981265,"sku":"B0D45BSJJ3","price":35.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/gekixutp-front-packaging-ornament-blank.jpg?v=1791682059"},{"product_id":"chuangdi-sublimation-keychains-12-piece-mixed-shapes-blank-metal-frames-with-removable-aluminum-inserts-for-heat-transfer","title":"Chuangdi Sublimation Keychains 12-Piece Mixed Shapes — Blank Metal Frames with Removable Aluminium Inserts for Heat Transfer","description":"\u003cp\u003e\u003cstrong\u003eChuangdi 12 Pcs Sublimation Keychains are a mixed set of blank metal keychain frames with removable aluminium inserts, made for heat-transfer printing custom photos, logos and artwork.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese keychains come as a set of 12 ready-to-print blanks — four round, four rectangle and four square — each fitted with a thin aluminium insert and a zinc-alloy outer frame. Remove the protective film, apply your sublimation transfer, press at the recommended settings and assemble; the result is a lightweight, durable personalised charm ideal for gifts, small-batch products or craft projects.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I prepare and print images on these keychains?\u003c\/h3\u003e\n\n\u003cp\u003ePrepare your artwork with the exact dimensions of the chosen shape and mirror the design before printing on sublimation paper. After printing, align the transfer on the aluminium insert, peel off the blue protective film, secure with heat-resistant tape and press according to suggested temperatures and time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse mirrored images sized to the keychain insert (round 35mm, rectangle 27 x 42mm, square 34 x 34mm).\u003c\/li\u003e\n  \u003cli\u003eRecommended press settings: 356–374°F (180–190°C) for roughly 60–70 seconds; test and adjust per your printer and ink.\u003c\/li\u003e\n  \u003cli\u003eRemove the blue protective film before sublimation and use heat-resistant tape to prevent shifting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials are these keychains made from and will the print last?\u003c\/h3\u003e\n\n\u003cp\u003eEach item features a zinc-alloy frame with a lightweight aluminium transfer insert that accepts dye-sublimation ink. The metal components are hard and smooth, designed to hold vibrant transfers without flaking; longevity depends on proper pressing and care.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOuter frame: zinc-alloy for strength and a polished look.\u003c\/li\u003e\n  \u003cli\u003eInsert: aluminium plate engineered for dye-sublimation receptive coating.\u003c\/li\u003e\n  \u003cli\u003eFinish: blue protective film on inserts to remove before pressing to keep surfaces pristine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I assemble the keychains after sublimation?\u003c\/h3\u003e\n\n\u003cp\u003eAssembly is simple: after pressing, peel off any remaining protective film, use the included double-sided tape to affix the printed aluminium insert into its metal frame, then attach the key ring. No glue is required; the tape keeps the insert securely in place for everyday use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEach frame includes a separate aluminium sheet and pre-applied double-sided tape on the back.\u003c\/li\u003e\n  \u003cli\u003ePress, cool briefly, remove film, align and apply the insert into the frame.\u003c\/li\u003e\n  \u003cli\u003eAttach the split-ring to the frame loop to finish the keychain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use these for small business products and craft events?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the set of mixed shapes and quantities makes these keychains well suited for prototyping, custom orders and craft workshops. Because they come ready to print and assemble, you can produce personalised items at scale with consistent sizing and professional-looking results.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePack includes 12 pieces (4 round, 4 rectangle, 4 square) to offer variety to customers.\u003c\/li\u003e\n  \u003cli\u003eCompact sizes work well as promotional merch, party favours or product add-ons.\u003c\/li\u003e\n  \u003cli\u003eLightweight construction keeps shipping costs low for small-batch sales.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: makers, small brands, crafters and hobbyists who want a ready-made sublimation blank to create personalised key charms—perfect for gift makers, event vendors and anyone testing new product designs. If you run a small customization business or enjoy hands-on craft projects, this Chuangdi kit supplies the basic mixed shapes and hardware to produce consistent, printable keychains quickly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperature and time should I use for sublimation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Start around 356–374°F (180–190°C) for 60–70 seconds and adjust based on your printer, ink and substrate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the aluminium inserts already attached to the frames?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — each aluminium insert is supplied separately with double-sided tape for easy placement into the metal frame.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Chuangdi","offers":[{"title":"Default Title","offer_id":55254621716817,"sku":"B08TWPF4X6","price":35.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/chuangdi-front-packaging-keychains.jpg?v=1791682142"},{"product_id":"gekixutp-metal-sublimation-keychain-blanks-150-piece-bulk-set-double-sided-plates-with-rings","title":"GEKIXUTP Metal Sublimation Keychain Blanks — 150-Piece Bulk Set, Double-Sided Plates with Rings","description":"\u003cstrong\u003eGEKIXUTP 150-piece metal sublimation keychain blank set supplies ready-to-print, double-sided keychain plates with rings and jump rings for large DIY projects.\u003c\/strong\u003e\n\n\u003cp\u003eBuild personalised keychains, ornaments, and small gifts quickly with this bulk set from GEKIXUTP. The kit contains 50 aluminium keychain blanks plus 50 split rings and 50 jump rings, all designed for heat-transfer sublimation. Each metal plate is coated on both faces to accept vivid transfers; a protective film covers the surfaces until you are ready to print. Lightweight, corrosion-resistant aluminium and standardized hardware let you assemble finished pieces for events, retail, or craft markets without sourcing components separately.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I prepare and sublimate these metal keychain blanks?\u003c\/h3\u003e\n\u003cp\u003ePeel the protective film only when you're ready to apply your design. Press at the recommended temperature and time for consistent colour transfer and avoid overexposure that can dull edges. Let the pieces cool briefly before adding rings to prevent misalignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove protective film from both sides immediately before printing.\u003c\/li\u003e\n  \u003cli\u003eRecommended press: 190–200°C (374–392°F) for about 50–60 seconds as a starting point.\u003c\/li\u003e\n  \u003cli\u003eUse firm, even pressure and heat-safe tape to hold transfers in place.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware and sizes are included for assembly?\u003c\/h3\u003e\n\u003cp\u003eThe bulk pack groups all necessary hardware so you can produce finished keychains in batches. Each set includes keychain plates plus split rings and jump rings sized for easy stringing and attachment to bags or zippers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50 metal aluminium keychain plates, double-sided and pre-coated for sublimation.\u003c\/li\u003e\n  \u003cli\u003e50 split\/split-style key rings for secure closure and easy user access.\u003c\/li\u003e\n  \u003cli\u003e50 jump rings to connect plates to key rings or other findings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich materials and finishing details affect durability and colour?\u003c\/h3\u003e\n\u003cp\u003eThe plates are made from aluminium with a sublimation receptive coating that resists rust and fading. The metal's smooth surface produces sharp, vibrant prints, while the coating improves scratch and wear resistance during everyday use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminium base for low weight and no corrosion concerns.\u003c\/li\u003e\n  \u003cli\u003eDouble-sided coated surfaces for two-sided designs or mirrored artwork.\u003c\/li\u003e\n  \u003cli\u003eProtective film keeps surfaces pristine until printing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use these blanks for different projects and events?\u003c\/h3\u003e\n\u003cp\u003eYes — the neutral metal plates and included hardware make the set versatile for many creative uses. They work well for custom giveaways, craft fair inventory, promotional merchandise, personalised gifts, and holiday ornaments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreate wedding favours, corporate swag, or school spirit tags with sublimated logos.\u003c\/li\u003e\n  \u003cli\u003eMake seasonal ornaments, bag tags, zipper pulls, and souvenir keychains.\u003c\/li\u003e\n  \u003cli\u003eProduce large quantities quickly thanks to the bulk packaging of 150 pieces total.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This GEKIXUTP set is aimed at crafters, small-business makers, event planners, and teachers who need a cost-effective way to produce many custom keychains and ornaments. If you operate a sublimation workstation or want a ready-to-use supply of uniform metal blanks and matching hardware, this pack simplifies sourcing and speeds up production.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to remove any film before sublimation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Peel off the protective film from both sides just before printing to expose the coated surface.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What heat and time settings work for these blanks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Start around 190–200°C (374–392°F) for 50–60 seconds and adjust slightly by your press and paper results.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GEKIXUTP","offers":[{"title":"Default Title","offer_id":55254625354065,"sku":"B0DFCVVY9F","price":35.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/gekixutp-front-packaging-metal-keychains.jpg?v=1791682232"},{"product_id":"gekixutp-metal-sublimation-keychain-blanks-150pc-pack-double-sided-aluminum-pre-coated-for-vibrant-transfers","title":"GEKIXUTP Metal Sublimation Keychain Blanks - 150pc Pack, Double-Sided Aluminium, Pre-Coated for Vibrant Transfers","description":"\u003cp\u003e\u003cstrong\u003eGEKIXUTP 150-piece metal sublimation keychain blanks are a ready-to-decorate kit of 50 double-sided aluminium keychain plates plus 50 split rings and 50 jump rings for bulk heat-transfer projects.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you make personalised merchandise, event swag, or handcrafted gifts, these metal blanks provide a sturdy, uniformly coated surface designed for dye-sublimation transfers. Each aluminium plate comes protected by peel-off films on both faces so they arrive scratch-free; once removed, the white-coated surface accepts vibrant inks and produces crisp details when heated with a heat press or mug press configured for small items.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I prepare and sublimate these keychain blanks?\u003c\/h3\u003e\n\u003cp\u003ePeel the protective film from both sides of the aluminium plates before transferring your artwork. Use a heat press set to roughly 190–200°C (374–392°F) and apply the transfer for about 50–60 seconds, adjusting time and temperature to match your press and transfer paper for optimal colour and edge clarity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove protective film from both faces before printing.\u003c\/li\u003e\n  \u003cli\u003eRecommended heat: ~190–200°C (374–392°F).\u003c\/li\u003e\n  \u003cli\u003eTypical dwell time: 50–60 seconds; test one first.\u003c\/li\u003e\n  \u003cli\u003eUse heat-resistant tape to secure transfers and avoid shifting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish do these blanks have?\u003c\/h3\u003e\n\u003cp\u003eThe plates are lightweight aluminium with a factory-applied sublimation coating that helps inks adhere and reproduce bright colours. The metal resists corrosion and scratching more than thin plastics, so finished keychains maintain appearance for longer with normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLightweight aluminium construction for durability.\u003c\/li\u003e\n  \u003cli\u003ePre-coated sublimation surface for vivid colour transfer.\u003c\/li\u003e\n  \u003cli\u003eProtective films on both sides for delivery without blemishes.\u003c\/li\u003e\n  \u003cli\u003eIncludes metal split rings and jump rings for immediate assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat projects suit the GEKIXUTP keychain blanks?\u003c\/h3\u003e\n\u003cp\u003eThese parts work well for small-batch gifts, event merchandise, classroom crafts, and retail-ready accessories. Because each plate is double-sided, you can create reversible designs or different artwork on each face, expanding customization options for holidays, brand promotions, or personalised keepsakes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCustom keychains, bag tags, zipper pulls, and ornaments.\u003c\/li\u003e\n  \u003cli\u003eEvent giveaways, school fundraisers, and wedding favours.\u003c\/li\u003e\n  \u003cli\u003eSmall-batch retail items or test runs for new designs.\u003c\/li\u003e\n  \u003cli\u003eTwo-sided prints for reversible or dual-themed designs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit best for? Makers, small-business sellers, craft instructors, and hobbyists who want a bulk supply of ready-to-print, metal sublimation blanks will find this set useful. The pack of 150 includes 50 coated plates with matching split rings and jump rings so you can focus on designing and transferring without sourcing hardware separately. If you plan to test settings first, do a few sample transfers to dial in temperature and time for your press and paper combination.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to remove film before sublimation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Peel the protective film from both sides of each plate before heat transfer for best ink adhesion and clarity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperature and time work for these blanks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Start with about 190–200°C (374–392°F) for 50–60 seconds and test one blank to fine-tune settings for your press.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GEKIXUTP","offers":[{"title":"Default Title","offer_id":55254628696401,"sku":"B0DFCXK2BX","price":35.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/gekixutp-front-packaging-keychain-blanks.jpg?v=1791682353"},{"product_id":"daomong-sublimation-slate-photo-frames-6-x-7-9-in-2-pack-heat-transfer-ready-waterproof-display","title":"Daomong Sublimation Slate Photo Frames 6 x 7.9 in (2-Pack) — Heat-Transfer Ready, Waterproof Display","description":"\u003cp\u003e\u003cstrong\u003eDaomong's Sublimation Blank Slate Rock Photo Frames are two 6 x 7.9-inch heat-transfer-ready stone plaques with display holders, made for personalised photos and custom sublimation artwork.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese 2 sublimation-ready slate picture frames let you turn printed or heat-pressed images into a durable, textured keepsake. Each rectangular stone panel measures 6 × 7.9 inches (15 × 20 cm) and ships with a display bracket so your finished piece stands upright on shelves, mantels, or tables. The surface is pre-coated for heat-transfer processes, waterproof, and treated to resist fading, making it a practical base for custom gifts, event mementos, and small gallery pieces.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I transfer a photo or design onto the Daomong slate?\u003c\/h3\u003e\n\u003cp\u003eUse standard sublimation printing and a heat press following the recommended time, temperature, and pressure for your transfer paper and ink. The slate's coating accepts dye-sub transfers and keeps image detail crisp when applied correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrint mirrored image on sublimation paper with sublimation ink.\u003c\/li\u003e\n  \u003cli\u003ePreheat slate briefly to remove moisture, then place transfer face-down.\u003c\/li\u003e\n  \u003cli\u003ePress at manufacturer-recommended temperature and time (follow your ink\/paper guide).\u003c\/li\u003e\n  \u003cli\u003eAllow to cool, then peel transfer paper and mount on the included bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes these rock frames durable for display?\u003c\/h3\u003e\n\u003cp\u003eDaomong's frames are cut from a tough, moisture-resistant slate with a high-quality heat-transfer coating that helps protect colour and surface integrity. The matte stone finish reduces glare and creates a handcrafted look that holds up in everyday rooms.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWaterproof slate resists humidity and light splashes.\u003c\/li\u003e\n  \u003cli\u003eUV-resistant coating reduces fading from sunlight exposure.\u003c\/li\u003e\n  \u003cli\u003eMatte texture hides fingerprints and softens reflections.\u003c\/li\u003e\n  \u003cli\u003eIncluded brackets provide stable tabletop display without extra hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich designs or occasions work best on these slate plaques?\u003c\/h3\u003e\n\u003cp\u003eThe compact rectangular shape and subtle stone texture make these plaques ideal for portrait photos, pet images, small landscapes, event logos, or short quotes. Their refined, rustic look suits weddings, anniversaries, graduations, holidays, and tabletop décor at cafes or living spaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWedding and engagement photos for intimate keepsakes.\u003c\/li\u003e\n  \u003cli\u003eGraduation or award images for desk displays.\u003c\/li\u003e\n  \u003cli\u003ePet portraits and family snapshots for cosy home decor.\u003c\/li\u003e\n  \u003cli\u003eSmall branded signage or menu highlights for shops and cafes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow many pieces are included and what accessories come with the set?\u003c\/h3\u003e\n\u003cp\u003eThe package contains two 6 x 7.9-inch sublimation-ready slate frames and two display brackets, one for each plaque. No extra screws or adhesive are needed to stand them; simply slide the frame into the bracket for instant display.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo stone photo frames, each 6 × 7.9 inches (15 × 20 cm).\u003c\/li\u003e\n  \u003cli\u003eTwo matching display holders for tabletop placement.\u003c\/li\u003e\n  \u003cli\u003ePre-coated surface ready for heat-transfer or dye-sublimation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? Creators, small-business owners, and gift-givers who want a tactile, long-lasting way to present photos or small artworks will value these Daomong slate frames. They're especially useful for crafters who own a heat-press or work with sublimation supplies, event planners seeking unique favours, and anyone searching for a handcrafted aesthetic in compact, ready-to-print pieces. If you want a weather-resistant, matte-stone base that elevates printed images into decorative plaques, this two-piece set provides a straightforward, professional-looking solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these frames with a standard heat press?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are coated for sublimation and work with typical heat-press settings—follow your ink and paper manufacturer's time and temperature guidelines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the frames waterproof and fade-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The slate is moisture-resistant and the coating helps reduce UV fading, making them suitable for indoor display and occasional damp environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Daomong","offers":[{"title":"Default Title","offer_id":55254655500625,"sku":"B09Z1XZ7LC","price":50.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/daomong-front-packaging-slate-frame.jpg?v=1791683284"},{"product_id":"sunhe-yhk-heat-press-pillows-4-pack-4-sizes-ptfe-non-stick-heat-transfer-pads-for-htv-sublimation","title":"SUNHE YHK Heat Press Pillows – 4-Pack (4 Sizes) PTFE Non-Stick Heat Transfer Pads for HTV \u0026 Sublimation","description":"\u003cp\u003e\u003cstrong\u003eThe SUNHE YHK Heat Press Pillow is a four-piece PTFE-covered heat transfer pad set that evens pressure for HTV, sublimation and screen-print projects while protecting your platen.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you run a small craft business or press at home, consistent pressure and a clean platen are essential for crisp transfers. These heat press pillows combine a non-stick PTFE surface with high-density foam to lift and cushion fabric over seams, zippers and collars, helping designs adhere evenly and preventing scorch or adhesive marks on your press bed.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this set improve adhesion on tricky areas like seams and zippers?\u003c\/h3\u003e\n\u003cp\u003eBy placing a cushion beneath the garment, the pad raises uneven sections so the heat source applies more uniform pressure over the transfer area. This reduces hard press lines and helps HTV or sublimation ink bond evenly across raised or textured sections of fabric.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-density foam evens pressure across seams and collars\u003c\/li\u003e\n\u003cli\u003ePTFE top resists sticking and scorching during extended presses\u003c\/li\u003e\n\u003cli\u003eFlexible shapes conform to zippers, buttons and raised embroidery\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes are included and when should I use each one?\u003c\/h3\u003e\n\u003cp\u003eThe set provides four sizes to suit a range of projects from baby garments to adult apparel and accessories. Small pads work well for sleeves and pockets, while larger pads cover full torso transfers or larger items like bags and pillow covers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5\"x5\" — ideal for sleeves, small patches and baby bodysuits\u003c\/li\u003e\n\u003cli\u003e10\"x10\" — mid-size transfers and smaller T-shirt prints\u003c\/li\u003e\n\u003cli\u003e12\"x15\" — full-front T-shirts and hoodies\u003c\/li\u003e\n\u003cli\u003e5\"x15\" — narrow but long areas such as side seams or sleeves\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this compatible with my heat press or household iron?\u003c\/h3\u003e\n\u003cp\u003eThese pillows are designed to work with most common heat press machines and can also be used with a household iron for smaller projects. The PTFE cover tolerates high temperatures and the foam core provides consistent give, so it functions well under platen-style presses and hand-applied heat.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWithstands temperatures up to 428°F (220°C)\u003c\/li\u003e\n\u003cli\u003eSuitable for HTV, sublimation, and screen-print transfers\u003c\/li\u003e\n\u003cli\u003eUse under platen or with an iron for small-scale pressing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I care for and store the heat press pillows?\u003c\/h3\u003e\n\u003cp\u003eThe PTFE surface wipes clean and resists dye and adhesive buildup, so maintenance is quick and simple. Keep them flat when not in use and avoid folding or storing under heavy objects to preserve the foam core’s shape and pressure properties.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWipe with a damp cloth after cooling to remove residue\u003c\/li\u003e\n\u003cli\u003eDo not machine wash or submerge; PTFE is waterproof but foam should stay dry\u003c\/li\u003e\n\u003cli\u003eStore flat in a cool, dry place away from direct heat sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Crafters, small studio owners and DIY makers who need reliable, reusable press accessories will find this SUNHE YHK pillow set useful. It’s tailored for people who press garments with seams, zippers or bulky details and want to protect their heat press and work surface while improving transfer results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these pillows handle high press temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the PTFE surface and foam core tolerate temperatures up to 428°F (220°C), suitable for most HTV and sublimation applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will they stick to adhesive or dye?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the non-stick PTFE top resists adhesive and dye, and wipes clean for repeated use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SUNHE YHK","offers":[{"title":"Default Title","offer_id":55254720872785,"sku":"B07SYJWW56","price":33.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/sunhe-yhk-front-view-heat-press-pillows.jpg?v=1791685061"},{"product_id":"chonovo-sublimation-metal-blanks-8x10-10-pack-0-45mm-polished-aluminum-for-photo-signs-pre-coated-warp-resistant","title":"CHONOVO Sublimation Metal Blanks 8x10 10-Pack, 0.45mm Polished Aluminium for Photo Signs — Pre-Coated, Warp-Resistant","description":"\u003cstrong\u003eCHONOVO 10 Pack Sublimation Metal Blanks are 8x10-inch, 0.45mm aluminium photo panels engineered for high-definition dye-sublimation printing.\u003c\/strong\u003e\n\nThese metal photo sign blanks come as a set of ten smooth, polished aluminium plates sized approximately 7.87 x 9.84 inches (20 x 25 cm) with a durable 0.45mm thickness. Each panel is coated and prepped for sublimation transfers so you can produce crisp, fade-resistant images suitable for home décor, gifts, or retail displays. The blanks include a protective film that must be removed before heat pressing; recommended heat settings are around 365°F (185°C) for 60–80 seconds, adjustable to match your printer, substrate, and desired finish.\n\n\u003ch3\u003eHow do these blanks deliver sharp photo-quality prints?\u003c\/h3\u003e\n\u003cp\u003eThe CHONOVO blanks are polished and coated for optimal dye absorption and image clarity. The slightly thicker 0.45mm aluminium resists warping during pressing and yields more rigid finished plaques than thinner alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePolished aluminium surface for even ink transfer\u003c\/li\u003e\n  \u003cli\u003ePre-coated for sublimation compatibility and vivid colours\u003c\/li\u003e\n  \u003cli\u003e0.45mm thickness improves stability and reduces bending\u003c\/li\u003e\n  \u003cli\u003eProtective film keeps surface pristine until ready to print\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the recommended heat press settings and prep steps?\u003c\/h3\u003e\n\u003cp\u003ePrepare each blank by peeling away the protective film just before printing. Typical settings are 365°F (185°C) for 60–80 seconds on a flat heat press, but times and temperature can be adjusted to suit your printer and transfer paper.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove protective film before sublimation\u003c\/li\u003e\n  \u003cli\u003eSet press to ~365°F (185°C) and 60–80 seconds as a starting point\u003c\/li\u003e\n  \u003cli\u003eUse heat-resistant tape and a Teflon sheet if needed for cleaner edges\u003c\/li\u003e\n  \u003cli\u003eAllow blanks to cool fully before handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat creative uses and display options work best with these sheets?\u003c\/h3\u003e\n\u003cp\u003eThese metal blanks are ideal for memorable, long-lasting gifts and signage. Print family photos, event mementos, business logos, or seasonal artwork for wall hanging or tabletop display.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePersonalised photo plaques for weddings, birthdays, holidays\u003c\/li\u003e\n  \u003cli\u003eSmall retail signage or product labels for indoor displays\u003c\/li\u003e\n  \u003cli\u003eOffice décor, awards, and keepsakes that require durability\u003c\/li\u003e\n  \u003cli\u003eDesktop stands or wall-mounting with adhesive strips or hooks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are CHONOVO metal blanks and what should I expect long-term?\u003c\/h3\u003e\n\u003cp\u003eThe aluminium construction and sublimation coating resist fading and everyday wear when used indoors. The thicker 0.45mm gauge offers improved rigidity so finished pieces hold up well on walls, desks, or shelves.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminium core resists bending compared with thinner sheets\u003c\/li\u003e\n  \u003cli\u003eSublimation images bond into the coating for lasting colorfastness\u003c\/li\u003e\n  \u003cli\u003eBest used for indoor display to preserve vibrancy\u003c\/li\u003e\n  \u003cli\u003eStore unused blanks flat and dry to avoid surface damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for? These CHONOVO 8x10 sublimation metal blanks are built for small-business makers, crafters, photographers, and DIY gift-makers who want a reliable, professional-looking substrate for dye-sublimation images. If you need a pack of identical, ready-to-print aluminium photo panels with a thicker gauge for reduced bending and consistent results, this 10-pack gives enough blanks to prototype designs, produce event keepsakes, or stock a small shop. Reach out to CHONOVO customer support if you need assistance; they offer responsive after-sales help to resolve product questions or printing tips.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to remove the protective film before sublimation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Peel off the protective film before heat pressing to ensure a clear, even transfer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What heat press settings work best for these blanks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Start at 365°F (185°C) for 60–80 seconds and adjust slightly for your printer and paper.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CHONOVO","offers":[{"title":"Default Title","offer_id":55254725394769,"sku":"B0C1BVQX6M","price":33.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/chonovo-front-packaging-8x10.jpg?v=1791685171"},{"product_id":"amone-3-inch-white-sublimation-ceramic-ornaments-round-porcelain-blanks-with-one-side-coating-gold-hanging-cord","title":"AMONE 3-inch White Sublimation Ceramic Ornaments — Round Porcelain Blanks with One-Side Coating \u0026 Gold Hanging Cord","description":"\u003cp\u003e\u003cstrong\u003eAMONE sublimation ceramic ornaments are 3-inch white porcelain round blanks with a one-sided sublimation coating and a gold hanging rope, made for heat-press or UV personalisation while leaving the back uncoated for handwriting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese bulk ornament blanks are designed for makers, crafters and small businesses who want a durable, bright surface for full-colour transfers and a writable reverse to add dates, messages or signatures. Each porcelain disk accepts sublimation or UV printing on the coated face and ships ready with a pre-attached gold cord for hanging. The neutral white finish provides a clean canvas for vivid photo-quality prints; the uncoated back preserves the ability to pen a personal note or write a name with ink.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I print designs that look vivid and last?\u003c\/h3\u003e\n\u003cp\u003eFor crisp, long-lasting transfers use a heat press with sublimation paper and dye-sublimation inks, or use a UV printer with appropriate UV inks. The coated front is engineered to take colour well and produce sharp photographic detail when correct temperatures and times are applied.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended temperature: 360°F (182°C)\u003c\/li\u003e\n  \u003cli\u003eSuggested dwell: about 250 seconds\u003c\/li\u003e\n  \u003cli\u003eCompatible methods: heat sublimation and UV printing\u003c\/li\u003e\n  \u003cli\u003eAvoid: solvent inks without testing; use inks specified for each method\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I add handwritten messages or dates?\u003c\/h3\u003e\n\u003cp\u003eYes — the reverse side is intentionally left uncoated to accept pens, markers and metallic gel pens for personal notes. This lets you combine photo-quality fronts with a personalised back for names, anniversaries or short messages.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBack is uncoated for best ink adhesion and legibility\u003c\/li\u003e\n  \u003cli\u003eWorks well with permanent markers and gel pens\u003c\/li\u003e\n  \u003cli\u003eIdeal for signing, dating or small dedications\u003c\/li\u003e\n  \u003cli\u003eTest a pen on a sample if archival permanence is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size and hardware come with each ornament?\u003c\/h3\u003e\n\u003cp\u003eEach ornament is a 3-inch round porcelain disk, sold in bulk so you can produce multiple keepsakes quickly. Every piece comes with a gold hanging rope already attached, making them ready to hang on trees, wreaths or display stands right after printing or writing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDiameter: 3 inches (round)\u003c\/li\u003e\n  \u003cli\u003eMaterial: white porcelain with sublimation coating on one side\u003c\/li\u003e\n  \u003cli\u003eIncluded: pre-attached gold hanging rope\u003c\/li\u003e\n  \u003cli\u003ePackaged for bulk crafting or retail use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can small businesses or crafters use these ornaments?\u003c\/h3\u003e\n\u003cp\u003eThese blanks are built for batch personalisation and limited-run retail items — ideal for holiday lines, wedding favours, commemorative pieces and branded gifts. Their white surface ensures predictable colour results and the writable back adds that handcrafted touch buyers appreciate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePerfect for seasonal inventory or event keepsakes\u003c\/li\u003e\n  \u003cli\u003eSuited to photo transfers, logos, names and dates\u003c\/li\u003e\n  \u003cli\u003eFast setup for heat-press production runs\u003c\/li\u003e\n  \u003cli\u003eGood option for craft fairs, online shops and corporate gifts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Makers, boutique sellers and event planners who want a reliable, white porcelain blank to apply full-colour sublimation or UV prints and still leave room for a handwritten sentiment will find these AMONE ornaments practical and ready-to-use. They work well for holiday merchandise, personalised gifts, memorial keepsakes and wedding favours where consistent print quality and a personal touch matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these ornaments suitable for dye-sublimation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The front side has a sublimation coating; recommended settings are 360°F for about 250 seconds with dye-sublimation inks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I write on the back of the ornament?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The back is uncoated to accept pens and markers, ideal for names, dates, or short messages.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AMONE","offers":[{"title":"Default Title","offer_id":55254822650193,"sku":"B0BG42NGRD","price":35.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/amone-front-coated-face.jpg?v=1791688221"},{"product_id":"hawersi-htv-cooling-block-with-handle-4x4-fast-heat-absorbing-craft-cooler-for-htv-sublimation-dtf","title":"HAWERSI HTV Cooling Block with Handle 4x4\" — Fast Heat-Absorbing Craft Cooler for HTV, Sublimation \u0026 DTF","description":"\u003cp\u003e\u003cstrong\u003eThe HAWERSI HTV Cooling Block with Handle is a compact, fast-acting cooling tool designed to absorb heat quickly after heat press jobs, protecting transfers and speeding workflow.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for makers who use heat transfer vinyl (HTV), sublimation paper, DTF film, and iron-on transfers, this cooling block brings a reliable way to lower surface temperature immediately after pressing. Built from a transparent dual-colour, heat-absorbing material and fitted with a sturdy metal handle, it snaps into your production routine to reduce sticking, minimize ghosting, and let you finish projects faster. Its 4\" x 4\" contact area is optimised for common small-to-medium items like t-shirts, bags, and patches.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the HAWERSI cooling block speed up heat press production?\u003c\/h3\u003e\n\n\u003cp\u003eThe block pulls heat away from the transfer area so you can continue working without long cooldown waits. Use it directly on the transfer right after pressing to lower the surface temperature and safely remove carrier sheets faster.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRapid heat absorption reduces waiting time between transfers.\u003c\/li\u003e\n  \u003cli\u003eLarge 4\" x 4\" surface covers typical small projects in one pass.\u003c\/li\u003e\n  \u003cli\u003eDurable metal handle allows steady back-and-forth cooling motion.\u003c\/li\u003e\n  \u003cli\u003eRefrigerate or freeze before use for extra cooling power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this block work with my HTV, DTF film, or sublimation paper?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the HAWERSI block is compatible with most common transfer materials including HTV, DTF, sublimation papers, and heat transfer paper. Its smooth surface contacts evenly and helps prevent smudging or adhesive reactivation while the substrate cools.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSafe for heat transfer vinyl and iron-on materials.\u003c\/li\u003e\n  \u003cli\u003eEffective for DTF film and sublimation transfers on fabrics.\u003c\/li\u003e\n  \u003cli\u003eReduces risk of image distortion from cool-down slippage.\u003c\/li\u003e\n  \u003cli\u003eWorks on varied items: apparel, hats, shoes, mouse pads and more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use and care for the cooling block to get best results?\u003c\/h3\u003e\n\n\u003cp\u003ePlace the block on the freshly pressed area and move the handle gently back and forth until the transfer reaches a safe handling temperature. For stronger cooling, store the block in the refrigerator or freezer between uses; keep it clean and dry to preserve the surface finish.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eApply directly after pressing, moving gently for even cooling.\u003c\/li\u003e\n  \u003cli\u003eChill in fridge\/freezer for faster heat draw between jobs.\u003c\/li\u003e\n  \u003cli\u003eWipe with a soft cloth; avoid harsh abrasives to protect the surface.\u003c\/li\u003e\n  \u003cli\u003eConsider buying multiples if running back-to-back transfers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow big is it and what projects is it best suited for?\u003c\/h3\u003e\n\n\u003cp\u003eThe cooling face measures 4\" x 4\", making it ideal for small-to-medium-sized transfer areas without constant repositioning. It is tailored to typical craft and small-business jobs like tees, small tote bags, patches, and other accessories where quick, even cooling matters.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e4\" x 4\" contact area covers most common transfer sizes.\u003c\/li\u003e\n  \u003cli\u003eCompact profile fits on platens and around smaller items.\u003c\/li\u003e\n  \u003cli\u003eStable metal handle gives precise control over pressure and movement.\u003c\/li\u003e\n  \u003cli\u003eUseful for both hobbyists and micro production runs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The HAWERSI HTV Cooling Block is made for decorators, crafters, and small-shop owners who want faster turnaround, cleaner peels, and more consistent results when using heat transfer vinyl, sublimation, or DTF processes. If you frequently press small items or run multiple transfers per session, this tool helps reduce downtime and improves handling confidence — especially when you pair it with a refrigerated block or keep spares on hand for continuous workflow.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I refrigerate the HAWERSI cooling block?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Chilling the block in a refrigerator or freezer before use increases cooling speed and efficiency.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it damage delicate transfers or fabrics?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The smooth surface and controlled pressure minimize risk; move gently and avoid excessive force.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HAWERSI","offers":[{"title":"Default Title","offer_id":55254860202321,"sku":"B0CZB7ZJ6R","price":35.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/hawersi-front-view-packaging.jpg?v=1791689576"},{"product_id":"vchomy-heat-press-pillow-bundle-4-pack-teflon-non-stick-pressing-pillows-4-sizes-for-even-pressure-seam-protection","title":"VCHOMY Heat Press Pillow Bundle — 4-Pack Teflon Non-Stick Pressing Pillows, 4 Sizes for Even Pressure \u0026 Seam Protection","description":"\u003cp\u003e\u003cstrong\u003eVCHOMY's 4 Pack Heat Press Pillow Bundle provides four non-stick, heat-resistant Teflon-covered pressing pillows in multiple sizes to support clean, even heat transfer on garments and accessories.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're applying heat-transfer vinyl, sublimation prints, or protective padding under seams and zippers, these thermal pillows give a smooth, cushioned surface that helps distribute pressure and shield delicate areas from heat and moisture. Each pillow combines a waterproof Teflon outer layer with resilient, fire-retardant foam that regains shape after repeated use, making them a reusable accessory for hobbyists and production workflows alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these pillows improve my heat transfer results?\u003c\/h3\u003e\n\u003cp\u003eThe pillows create a consistent, slightly yielding platform that evens out pressure across the design area, reducing hotspots and minimizing imprint distortion. The Teflon cover prevents sticking and allows transfers to release cleanly while protecting substrates from direct contact with platen heat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEven pressure distribution to avoid cold or hot spots\u003c\/li\u003e\n  \u003cli\u003eNon-stick Teflon surface for clean release and easy cleanup\u003c\/li\u003e\n  \u003cli\u003eWaterproof cover that blocks moisture from ink or adhesives\u003c\/li\u003e\n  \u003cli\u003eFoam core that springs back for repeated presses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich sizes are included and when should I use each one?\u003c\/h3\u003e\n\u003cp\u003eThe bundle contains four different sizes to match a variety of projects: a small square, two rectangles and a larger rectangle suitable for broader areas. Choose the pillow that most closely fits beneath the printed area for best pressure control and to protect seams, zippers or raised design elements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5 x 5 inch — ideal for small patches, sleeves, and kids’ clothing\u003c\/li\u003e\n  \u003cli\u003e10 x 10 inch — good for standard shirt chest prints and medium transfers\u003c\/li\u003e\n  \u003cli\u003e5 x 15 inch — fits along sleeves, pant legs, and narrow panels\u003c\/li\u003e\n  \u003cli\u003e12 x 15 inch — covers larger panels and backs of garments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these pillows durable and easy to maintain?\u003c\/h3\u003e\n\u003cp\u003eThe outer Teflon coating resists heat and prevents staining, while the inner foam is fire-retardant and recovers its shape after use. Cleaning is simple: wipe the Teflon surface with a damp cloth; avoid abrasive cleaners to preserve the non-stick finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReusable Teflon exterior resists burns and stains\u003c\/li\u003e\n  \u003cli\u003eFire-retardant foam core maintains its form over many presses\u003c\/li\u003e\n  \u003cli\u003eWipe-clean surface for quick maintenance between jobs\u003c\/li\u003e\n  \u003cli\u003eCompact sizes store easily in a craft or production space\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these pillows work with different heat press types and materials?\u003c\/h3\u003e\n\u003cp\u003eYes — the set is compatible with most clamshell and swing-away heat presses, plus household irons for small projects. They are suitable for vinyl, sublimation transfers, heat-applied patches, and situations where seams, zippers, or hardware require a raised, forgiving surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with heat presses and irons for hobby and small-batch use\u003c\/li\u003e\n  \u003cli\u003eWorks with heat-transfer vinyl, sublimation paper, and transfers\u003c\/li\u003e\n  \u003cli\u003eHelps protect areas with hardware, thick seams, or uneven surfaces\u003c\/li\u003e\n  \u003cli\u003eUseful for children’s garments that fit fully on smaller pillows\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Makers, small-business decorators, screen-printers adding heat-applied embellishments, and crafters who need versatile protection for delicate areas during pressing. If you apply transfers on apparel, bags, or small fabric goods and want a dependable, reusable solution for even pressure and non-stick protection, this VCHOMY four-piece pillow set is a practical addition to your toolkit. The set also includes a 60-day product exchange and money-back option through VCHOMY customer service for added confidence.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these pillows with a household iron?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Teflon-covered pillows work with household irons for small projects, but larger heat presses are better for consistent production.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I clean and maintain the pillows?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Wipe the Teflon surface with a damp cloth. Avoid abrasive cleaners and excessive heat beyond normal pressing temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VCHOMY","offers":[{"title":"Default Title","offer_id":55254945431889,"sku":"B0B39P4GML","price":35.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/files\/vchomy-front-packaging-view.jpg?v=1791693047"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/5567\/3681\/collections\/joyclub-front-packaging-20oz-tumbler.jpg?v=1792143541","url":"https:\/\/craftiche.co.uk\/collections\/heat-press-accessories.oembed?page=4","provider":"Craftiche","version":"1.0","type":"link"}